Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
SurfPrep ProFoam sanding disc is a 6 inch, 10mm foam-backed, very fine 280-320 grit, multi-hole aluminum oxide sanding disc designed for detailed surface preparation and finishing work. The very fine 280-320 grit aluminum oxide abrasive cuts lightly while refining the surface, which helps when dialing in final smoothness before next finishing steps. The 10mm foam layer supports the disc as it follows subtle contours, so the abrasive can contact the surface more evenly on profiled or slightly irregular areas. The 6 inch diameter provides a broad sanding path, allowing more coverage per pass on panels or wider parts. The multi-hole pattern aligns with matching backup pads to draw dust away from the sanding face, which helps keep the abrasive cutting more consistently as you work. The disc is part of SurfPrep ProFoam, built for sanding applications that demand controlled removal with very fine scratch patterns.
This SurfPrep ProFoam 6 inch disc uses a 10mm foam backing, so the abrasive sits on a relatively thick, resilient layer that supports blending on edges and profiles as part of a finishing workflow. The very fine 280-320 grit rating positions this disc for light-touch sanding stages, where the goal is to smooth and refine rather than remove heavy stock. The multi-hole pattern is arranged for use on matching multi-hole backing pads, allowing dust paths through the disc during sanding. The 6 inch size suits tools set up for that diameter, tying the disc directly into existing sanding stations where 6 inch hook and loop style discs are used for fine finishing passes.
The SurfPrep ProFoam 6 inch x 10mm very fine 280-320 grit disc fits sanding steps where surfaces have already been shaped and only need refinement. The 10mm foam backing supports work on contoured trim, profiled moldings, or eased edges by letting the abrasive ride over small curves with less chance of digging in. On flat faces such as cabinet doors, drawer fronts, or panels, the 6 inch diameter covers a good portion of the surface in each pass, helping maintain even scratch patterns across wider areas. The multi-hole aluminum oxide construction supports use in dust-managed sanding setups, aligning with multi-hole pads that pull debris through the disc while you work. This disc sits in SurfPrep's ProFoam family, geared toward sanding tasks that combine profile-following ability with very fine surface refinement.
The very fine 280-320 grit rating on this SurfPrep ProFoam disc defines how it behaves in a sequence of abrasives, placing it in the fine-finishing range where scratches are small and easier to hide under subsequent coatings. The aluminum oxide abrasive provides a consistent cutting mineral, which helps produce predictable scratch patterns from disc to disc as jobs repeat. The 10mm foam layer under the abrasive spreads pressure across a slightly larger contact area, helping reduce sudden pressure points that can appear when sanding over edges or minor variations. The 6 inch diameter and multi-hole format integrate into sanding systems built for 6 inch multi-hole hook and loop style discs, so the disc can work as part of a standardized abrasive setup. As a bulk 100/each offering, this specific configuration is aimed at shops and users who cycle through discs regularly and want the same 6 inch, 10mm, very fine 280-320 grit, multi-hole aluminum oxide disc on hand for repeat finishing tasks.
This SurfPrep ProFoam sanding disc uses aluminum oxide abrasive, which provides controlled cutting and a consistent scratch pattern suitable for fine sanding stages.
The SurfPrep ProFoam disc is rated very fine 280-320 grit, positioning it for light material removal and surface refinement rather than aggressive stock removal.
This SurfPrep ProFoam sanding disc has a 6 inch diameter, which suits sanders and backing pads designed around 6 inch abrasive discs.
The ProFoam disc uses a 10mm foam backing, giving the abrasive a cushioned base that helps it follow profiles and gentle curves during sanding.
The multi-hole design allows dust to move through the disc when paired with a matching pad, supporting cleaner sanding and more uniform cutting across the surface.
SurfPrep part number SP6DPF10VFVCB-100 identifies this specific ProFoam 6 inch x 10mm very fine 280-320 grit multi-hole aluminum oxide sanding disc in a bulk 100/each format.
The SurfPrep ProFoam 6 inch x 10mm very fine 280-320 grit multi-hole aluminum oxide sanding disc provides a defined combination of size, grit, foam thickness, and hole pattern for repeatable fine sanding tasks. The ProFoam construction assists when working over contours, while the very fine grit supports final surface refinement in a sanding sequence. For operations built around 6 inch multi-hole SurfPrep discs, selecting this SP6DPF10VFVCB-100 configuration from Wurth Baer Supply helps keep a consistent abrasive ready for ongoing finishing and touch-up work.
Sold In: 100 Each