Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
SurfPrep ProFoam 6 inch sanding disc is a foam-backed abrasive disc that uses aluminum oxide to cut surfaces while managing contact pressure, which helps installers and refinishers work edges and profiles with more control than rigid paper discs. The 6 inch diameter presents a familiar footprint for many sanders, so users can switch to this disc style without changing their working patterns on doors, drawer fronts, or flat panels. A 1/2 inch foam layer sits between the abrasive and the sander, giving the disc room to conform slightly to contours so scratch patterns stay more even on milled edges. The medium plus rating tied to 150-180 grit positions this disc in the general prep and between-coat range, supporting tasks where stock removal must balance with surface refinement before further steps.
This ProFoam 6 inch disc is identified as a H&L style disc in the web description, meaning the working side uses hook and loop attachment to grip a matching pad, which simplifies disc changes during grit progression. The multi-hole pattern creates several openings through the abrasive face, aligning with dust-ready pads so air movement can pull debris off the surface instead of letting it load into the grit. The medium plus 150-180 grit specification places this disc in a stage where installers often move after heavier cutting, so the softer foam layer becomes helpful for blending those earlier passes into a more uniform scratch field before coating steps.
This SurfPrep ProFoam 6 inch x 1/2 inch medium plus disc fits sanding situations where flat surfaces meet light profiles, such as shaker frames, eased edges, and similar cabinet components. The foam thickness gives the disc a little give over profiles, which matters when sanding primed or bare wood that should not be flattened at high spots. In shop environments, the 150-180 grit placement lines up with stages used before primer scuffing or between coats on painted or sealed pieces, so technicians can reserve coarser grits for true leveling and use this disc for refinement. On install sites, the 6 inch size helps crews address door faces or face-frame edges with a single footprint, supporting consistent blend-in work on adjustments and touch-ups.
The combination of aluminum oxide abrasive and foam backing on this 6 inch disc supports predictable results because the grit cuts while the foam moderates contact, which keeps scratches more uniform when the tool passes over edges and transitions. The medium plus description paired with 150-180 grit tells the user this disc is tuned for steps where the goal is smoothness rather than heavy stock removal, reducing the risk of oversanding in those phases. Multi-hole construction works with dust-ready pads so abrasive particles move away from the sanding face, letting the same disc continue cutting instead of skating on a dust layer. The H&L identification signals hook and loop attachment, which lets crews rotate or swap discs quickly as they move between parts or switch grits, saving time on both bench and field work.
This SurfPrep ProFoam disc uses aluminum oxide abrasive, which converts sander motion into a consistent cut suitable for typical woodworking and cabinetry materials.
The ProFoam medium plus disc is specified at 150-180 grit, placing it in a surface-prep range where material is refined rather than aggressively removed.
This SurfPrep ProFoam disc is 6 inches in diameter, matching many random-orbit and finishing sanders used on cabinet doors and panels.
The 1/2 inch foam backing allows the disc to conform slightly to edges and profiles, helping reduce pressure ridges and uneven scratch patterns.
The multi hole pattern provides paths for dust to move away from the sanding surface, supporting cleaner cutting and more consistent results over longer passes.
The web description identifies this as a H&L disc, so it uses a hook and loop interface that allows quick disc changes on compatible backing pads.
This SurfPrep ProFoam 6 inch x 1/2 inch medium plus 150-180 grit multi-hole aluminum oxide sanding disc gives shops and installers a foam-backed option for controlled prep and refinement stages. The combination of a 6 inch footprint, foam backing, multi-hole layout, and hook and loop attachment supports efficient sanding across common cabinetry and woodworking tasks where a balanced cut is needed. Choosing this ProFoam disc through Wurth Baer Supply aligns daily sanding work with a consistent abrasive setup across shop and field applications.
Sold In: 100 Each