Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
700LCA Schlage less deadbolt doors lock body is a zinc die cast deadbolt lock body from Olympus Lock, Inc. that is designed for Schlage compatible key-in-knob cylinders with a 1-1/8 inch cylinder length, so it fits that specific cylinder format on your door jobs. The LOCK BODY ONLY for Schlage cyl 1-1/8in configuration focuses on the locking mechanism itself, which lets you match it to Schlage compatible key-in-knob cylinders on site for consistent keying across doors. The oil rubbed bronze finish provides a dark, uniform appearance that aligns with oil rubbed bronze door hardware, so the visible lock body areas coordinate with existing trim. The easily rekeyable via set screw cylinder release mechanism allows the cylinder to be released using the set screw mechanism, so you can change cylinders without replacing the lock body when rekeying projects arise. The Olympus 700LCA-10B lock body is described as less deadbolt doors, showing its role as the core lock body component rather than a full deadbolt set.
This oil rubbed bronze deadbolt lock body is part of the Deadbolt Locks product class and is built as a lock body for deadbolt doors, so it serves as the main housing that works with a Schlage compatible key-in-knob cylinder rather than functioning as a separate latch type. Because the mechanism is easily rekeyable via set screw cylinder release mechanism, the installer can release the cylinder by manipulating the set screw, allowing fast cylinder swaps when keying plans change. The 1-1/8 inch cylinder length specification defines the interface for the Schlage compatible key-in-knob cylinder, so this Olympus lock body interfaces predictably with that cylinder length across doors. Since it will accept other manufacturer's Schlage compatible key-in-knob cylinders, it lets you integrate this 700LCA-10B lock body into mixed-brand hardware projects that still use the Schlage compatible key-in-knob cylinder standard.
This 700LCA Schlage less deadbolt doors lock body is categorized under Locks and Latches and Deadbolt Locks, so it is suited to door applications where a deadbolt-style locking action is required with a Schlage compatible key-in-knob cylinder. The LOCK BODY ONLY for Schlage cyl 1-1/8in description highlights that it is intended to pair with Schlage compatible key-in-knob cylinders of that 1-1/8 inch cylinder length, giving a clear target for hardware matching in commercial or multi-unit door runs. Its oil rubbed bronze finish ties it to projects where oil rubbed bronze hardware is already specified, so door sets can maintain a consistent color theme around the lock area. The fact that it will accept other manufacturer's Schlage compatible key-in-knob cylinders means it works in environments that already rely on that cylinder profile, letting you fit this lock body into existing key systems while using that cylinder style.
The easily rekeyable via set screw cylinder release mechanism provides a defined method to release the cylinder using the set screw, giving locksmiths and installers a straightforward, repeatable step when rekeying or replacing Schlage compatible key-in-knob cylinders. Because the product passed ANSI/BHMA A156.11 Grade 1 performance requirements, the lock body design has been tested against that performance standard, which matters when projects call for Grade 1 deadbolt lock bodies in higher-use or spec-driven installations. The zinc die cast construction creates a single-piece lock body shell for the internal mechanism, supporting stable cylinder alignment with the 1-1/8 inch cylinder length during installation and subsequent cylinder changes. Since the 700LCA-10B is described as a Schlage less deadbolt doors lock body from Olympus Lock, Inc., it lets you specify a branded, part-numbered lock body that aligns with Schlage compatible key-in-knob cylinder platforms, which helps keep ordering and replacement consistent throughout a building program.
The 700LCA-10B lock body will accept Schlage compatible key-in-knob cylinders with a 1-1/8 inch cylinder length, so it pairs with that specific Schlage compatible cylinder profile.
The 700LCA Schlage less deadbolt doors lock body uses an easily rekeyable via set screw cylinder release mechanism, allowing the cylinder to be released through the set screw for quick cylinder swaps.
The Olympus 700LCA-10B lock body passed ANSI/BHMA A156.11 Grade 1 performance requirements, so it aligns with Grade 1 deadbolt lock body performance specifications.
The 700LCA-10B lock body is zinc die cast, providing a metal body that forms the core structure for the deadbolt lock mechanism.
The Olympus 700LCA Schlage less deadbolt doors lock body has an oil rubbed bronze finish, matching door hardware specified in oil rubbed bronze.
The lock body will accept other manufacturer's Schlage compatible key-in-knob cylinders, allowing use with multiple brands that follow that compatibility.
The Olympus Lock, Inc. 700LCA-10B lock body focuses on Schlage compatible key-in-knob cylinders with a 1-1/8 inch cylinder length, so it serves projects built around that cylinder standard. Its zinc die cast construction, oil rubbed bronze finish, and ANSI/BHMA A156.11 Grade 1 performance compliance position it as a clearly defined deadbolt lock body choice within the Deadbolt Locks class. When a job calls for a LOCK BODY ONLY for Schlage cyl 1-1/8in that is easily rekeyable via set screw cylinder release mechanism and will accept other manufacturer's Schlage compatible key-in-knob cylinders, this 700LCA Schlage less deadbolt doors lock body offers a specific, part-numbered solution for consistent door hardware planning.
Sold In: 1 Each
