Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Schlage C keyway deadbolt drawer lock from Olympus Lock uses a pin tumbler design, giving drawers a keyed security point that suits commercial and shop environments where controlled access matters. The 1-3/8 inch cylinder length positions the locking mechanism deeper in the drawer or casework, which helps match thicker drawer fronts or panels in many woodworking layouts. The oil rubbed bronze finish provides a darker, traditional appearance on visible drawer faces, supporting projects where hardware color needs to coordinate with other bronze-finished components. A zinc die cast body pairs with a solid brass cylinder, combining a sturdy lock case with a precisely machined key section that supports repeatable key operation over many locking cycles. The Schlage C keyway profile lets this lock work within systems based on that keyway, which is useful when matching to other Schlage C keyway installations in the same facility.
The 1-3/8 inch cylinder length on this Olympus 700 Schlage C drawer lock positions the cylinder to suit drawer or panel constructions that need the longer barrel length, helping align the key face with the drawer front while keeping the bolt where the casework requires it. The non-handed standard function means the lock body works in either orientation without hand-specific versions, which is useful when laying out multiple drawers that may open from different sides or require mirrored installations. The set screw cylinder release mechanism creates a defined service point on the lock for cylinder removal, so installers can mount the body once and then change cylinders later through that release without disturbing the mounting position.
This 700 Schlage C keyway pin tumbler deadbolt drawer lock is designed as a drawer deadbolt, so it serves in casework and cabinetry where a deadbolt-style throw is preferred for securing the drawer. Its classification under deadbolt locks places it in projects where a positive bolt into a strike is needed on drawers rather than a simple latch, which suits storage areas that must stay closed until intentionally unlocked. The cylinder length of 1-3/8 inch aligns with drawer or panel builds that require a longer reach from face to locking plane, helping match thicker faces or decorative fronts commonly used in custom woodworking.
The pin tumbler mechanism in the Olympus Lock 700S-10B138-KD provides key control that stays consistent across many cycles, because the pin stack design governs how the Schlage C keyway key operates the plug. Passing ANSI/BHMA A156.11 Grade 1 performance requirements means the lock design has been evaluated to a standard level, which supports use in heavier duty environments where drawers are locked and unlocked repeatedly. The solid brass cylinder contributes a precise keyway and plug interface, which supports smoother key insertion and turning during everyday use, while the zinc die cast body holds the mechanism in alignment within the drawer. The key removable in locked or unlocked position function allows the key to be taken out after locking or after unlocking, which can match workflows where users either lock the drawer and remove the key or leave it unlocked and still remove the key. Because the cylinder will accept other manufacturer Schlage compatible key-in-knob cylinders, facilities already using those cylinders can tie this drawer deadbolt into the same key platform by choosing cylinders built for that shared Schlage compatibility.
The Olympus 700S-10B138-KD is a 700 Schlage C keyway pin tumbler deadbolt drawer lock, so it provides a deadbolt-style locking action for securing drawers in cabinetry or casework.
The 1-3/8 inch cylinder length reaches through thicker drawer fronts or panels, positioning the key face at the exterior while keeping the deadbolt throw aligned with the strike in deeper constructions.
This Schlage C keyway deadbolt drawer lock is keyed different, so each lock uses its own key pattern, helping separate access to individual drawers when unique keys are desired.
The drawer lock uses a set screw cylinder release mechanism, so the cylinder can be released at that point for re-keying, allowing changes to the keying without replacing the mounted lock body.
This deadbolt drawer lock passed ANSI/BHMA A156.11 Grade 1 performance requirements, aligning it with a tested performance level suited to demanding, higher-use environments.
The lock uses a Schlage C keyway and its cylinder accepts other manufacturer Schlage compatible key-in-knob cylinders, so it can integrate into broader Schlage C keyway keying systems.
The Olympus 700 Schlage C keyway pin tumbler deadbolt drawer lock in oil rubbed bronze brings a 1-3/8 inch cylinder length, Grade 1 tested performance, and a Schlage C keyway that integrates with Schlage C keyway systems. Its zinc die cast body and solid brass cylinder provide a robust locking unit, while keyed different configuration and easy re-keying through the set screw cylinder release mechanism support real-world key control needs. For woodworking and casework projects that need a deadbolt-style drawer lock built around the Schlage C keyway profile, this model offers a focused, system-ready solution.
Sold In: 1 Each
