700 Schlage C Keyway Pin Tumbler Deadbolt Drawer Lock, Satin Chrome, Keyed to Alike #101, Cylinder Length 1-3/8"

Schlage C Keyway Deadbolt Drawer Lock For Secure Cabinets

Schlage C keyway deadbolt drawer lock from Olympus Lock, Inc. is a pin tumbler deadbolt drawer lock designed for installations that need a Schlage C key system on drawers or similar applications. The cylinder length is 1-3/8 inch, so it suits layouts built around that barrel depth where deadbolt throw and body clearance matter. The lock body is zinc die cast, which provides a solid housing for the mechanism in everyday drawer use. The cylinder is solid brass, giving a stable keying interface over repeated cycles. This model is keyed alike as KA101, so multiple units with that keying can operate on the same key for straightforward key control. The finish is satin chrome (26D), which matches satin chrome hardware schemes in commercial and shop environments.

Keyed Drawer Lock Details That Support Daily Use

• The pin tumbler deadbolt design provides positive bolt engagement, which supports applications needing a defined locked position on drawers or enclosures.
• The Schlage C keyway allows this lock to work within existing Schlage C key systems, aligning drawer security with the same key pattern used elsewhere on the project.
• Keyed alike KA101 means multiple locks sharing that designation operate with the same key, reducing key count for installers managing groups of matching locks.
• The lock is easily re-keyable via a set screw cylinder release mechanism, so the cylinder can be changed within the housing when keying plans change over time.
• Key removal in either locked or unlocked position lets users remove the key after cycling the plug without needing to return the lock to a specific state.
• Standard function locks are non-handed, so the same body can be used in left- or right-hand orientations without separate part numbers.

Installation And Cylinder Fit For 1-3/8 Inch Barrels

The 1-3/8 inch cylinder length defines how this Olympus 700 Schlage C keyway lock seats through the drawer front, so bore depth and back clearance can be laid out around that dimension. The non-handed standard function allows positioning the deadbolt orientation according to drawer design without changing the lock model. The set screw cylinder release mechanism gives a defined way to remove the cylinder during keying work, which matters when locks need to match master key plans or later re-key cycles. Key removal in locked or unlocked positions simplifies operation in service areas where users do not want the key trapped by bolt status.

How This Olympus Schlage C Lock Fits Real Jobs

Where This Deadbolt Drawer Lock Is Typically Used

This 700 Schlage C keyway pin tumbler deadbolt drawer lock fits projects that require drawer security using a Schlage C keyway across cabinets or fixtures. The deadbolt function creates a projecting bolt that engages a strike, which suits drawer fronts where a straight-throw bolt can catch a bar or frame. The satin chrome 26D finish pairs with satin chrome hardware schemes on cabinets and casework, helping maintain a consistent hardware look. The 1-3/8 inch cylinder length is suited to drawer fronts and panels that accept that barrel depth, helping align front thickness with the lock body and rear hardware.

The lock body is zinc die cast, so the core housing stands up to repeated locking and unlocking in typical drawer duty cycles. The solid brass cylinder supports precise operation of the pin tumbler mechanism, which matters where key life and smooth turning are expected in commercial or shop environments. This model accepts other manufacturer Schlage compatible key-in-knob cylinders, allowing installers using Schlage compatible cylinders to integrate those with this lock body when matching broader systems. The keyed alike KA101 configuration fits installations needing a group of drawers opened by the same key number, simplifying access patterns for staff.

Why These Lock Details Help Repeatable Install Results

The easily re-keyable design using a set screw cylinder release mechanism helps locksmiths and installers adjust keying as systems grow or tenants change, without altering the lock body layout in the drawer. Being able to remove the cylinder in this controlled way supports efficient bench work on cylinders while keeping the installed footprint stable. Key removal in locked or unlocked position means users can lock or unlock, then remove the key in either state, which reduces key handling steps in service or retail fixtures that open frequently.

Standard function non-handed construction allows installers to use the same Olympus 700S-26D138-101 part on left- or right-oriented drawers, streamlining planning and stocking for multi-bay runs. Acceptance of other manufacturer Schlage compatible key-in-knob cylinders gives flexibility when locks must align with existing Schlage compatible cylinder inventories, aiding system consistency. Meeting ANSI/BHMA A156.11 Grade 1 performance requirements indicates the lock has been tested to that grade, which matters on projects where that level is specified. Together, the 1-3/8 inch cylinder, Schlage C keyway, and KA101 keyed alike configuration build a predictable, repeatable pattern for drawer locking layouts tied into Schlage-based key systems.

Common Questions About This Schlage C Drawer Lock

Select This Lock For Schlage C Drawer Systems

The Olympus Lock, Inc. 700 Schlage C keyway pin tumbler deadbolt drawer lock in satin chrome 26D brings a 1-3/8 inch cylinder, KA101 keyed alike setup, and ANSI/BHMA A156.11 Grade 1 performance alignment to Schlage C based drawer layouts. When a project needs drawer locks working within a Schlage C key system, this zinc die cast body with solid brass cylinder, non-handed function, and set screw cylinder release mechanism provides a consistent, system-ready component. Use this model where Schlage C keyway, defined cylinder length, and keyed alike groups are required across cabinet or fixture runs.