
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
700 Schlage C keyway deadbolt drawer lock describes an Olympus Lock, Inc. pin tumbler deadbolt drawer lock built for drawer applications where a positive deadbolt action is needed to hold the drawer shut. The 1-1/8 inch cylinder length supports drawer fronts designed for this barrel depth so the cylinder seats correctly. The Schlage C keyway allows this lock to be keyed together with other Schlage C keyway locks, which helps standardize keying across multiple drawer positions in a project. A bright brass finish presents a traditional brass appearance that matches other US3 hardware in the same area. The body is zinc die cast while the cylinder is solid brass, combining a zinc housing with a brass cylinder to create a familiar feel at the key while the lock body supports the mechanism. Standard function locks are non-handed, so the same part works in either orientation on the drawer.
The 1-1/8 inch cylinder length defines how this Olympus Lock, Inc. deadbolt drawer lock seats in a drawer front bored for that depth, so the installer can lay out boring and bolt engagement for a 1-1/8 inch barrel. The body being zinc die cast and the cylinder solid brass means the cylinder interacts with the key in a brass material while the zinc body supports mounting and bolt action inside the drawer. Standard function locks being non-handed allows the same lock to be positioned to suit left or right arrangements in the drawer construction without a different part number. Key removable in locked or unlocked position supports installation in locations where the user may want to take the key away after setting the drawer either secured or open.
The Schlage C keyway on this 700 Schlage C keyway deadbolt drawer lock means it can be keyed together with other Schlage C keyway locks, tying drawer security into existing Schlage C key control. When a project uses Schlage C keying for doors or other locks, this drawer lock can be incorporated so the same key pattern can operate drawers as well. Will accept other manufacturer's Schlage compatible key-in-knob cylinders, so a Schlage compatible cylinder can be used where a specific key system already exists, keeping the drawer lock aligned with the established key-in-knob platform. The lock being easily re-keyable via the set screw cylinder release mechanism further supports long-term key system changes. Standard function locks being non-handed allows this same model to be used across multiple drawer banks regardless of swing orientation or cabinet layout.
The easily re-keyable design using a set screw cylinder release mechanism gives locksmiths and maintenance teams a defined point to release the cylinder for re-keying, which keeps future key changes focused on the cylinder rather than cabinet reconstruction. Passing ANSI/BHMA A156.11 Grade 1 performance requirements indicates the lock mechanism has been tested to that grade of deadbolt performance, which supports confidence when specifying it for drawers that see frequent locking cycles. Key removable in locked or unlocked position influences how staff interact with the cabinet, since the key can be withdrawn once the drawer is either secured or opened, reducing time spent at each lock. The body being zinc die cast with a solid brass cylinder provides a familiar brass-key-to-cylinder interface alongside a zinc housing that supports the bolt and mounting footprint. The bright brass US3 finish lets the visible components coordinate with other bright brass hardware in the same installation so the drawer front appearance stays consistent.
The 700 Schlage C keyway deadbolt drawer lock uses a Schlage C keyway, so it can be keyed together with other Schlage C keyway locks in the same keying system.
The Olympus Lock, Inc. model 700S-US3-KD has a 1-1/8 inch cylinder length, which suits drawer fronts and layouts designed around that barrel depth.
The 700 Schlage C keyway deadbolt drawer lock is easily re-keyable via a set screw cylinder release mechanism, allowing cylinder changes while retaining the lock body.
This deadbolt drawer lock passed ANSI/BHMA A156.11 Grade 1 performance requirements, aligning it with that tested deadbolt performance level for demanding applications.
The standard function locks are non-handed, so the same 700S-US3-KD model works in either orientation on appropriate drawer constructions.
The key on this deadbolt drawer lock is removable in the locked or unlocked position, allowing the user to remove the key after locking or opening the drawer.
The 700 Schlage C keyway deadbolt drawer lock from Olympus Lock, Inc. combines a 1-1/8 inch cylinder length, Schlage C keyway, and bright brass finish to fit drawer fronts planned for that barrel depth and appearance. The easily re-keyable set screw cylinder release mechanism and acceptance of other manufacturer's Schlage compatible key-in-knob cylinders support long-term key control decisions. Passing ANSI/BHMA A156.11 Grade 1 performance requirements and offering key removable in locked or unlocked position make this deadbolt drawer lock suited to drawers that see regular locking cycles while remaining aligned with an existing Schlage C key system.
Sold In: 1 Each