Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Schlage C keyway deadbolt drawer lock from Olympus Lock uses a pin tumbler deadbolt design to secure drawer applications, giving installers a keyed solution that ties into existing Schlage C key systems. The lock is keyed alike KA101, so multiple locks on the same job can operate from one key number for straightforward key control. A 1-3/8 inch cylinder length gives this model reach for thicker drawer fronts where shorter cylinders do not project enough for reliable engagement. The body is zinc die cast, while the cylinder is solid brass, combining a robust housing with a proven cylinder material for long-term keying performance. The standard function is non-handed, allowing use on either side of a cabinet run without different part numbers. A Schlage C keyway lets this lock be keyed together with other Schlage C keyway locks, simplifying master key setups on commercial or institutional projects.
The 1-3/8 inch cylinder length provides the projection needed for drawer front constructions where added thickness would otherwise limit cylinder engagement, supporting consistent deadbolt throw into the strike. The body uses zinc die cast construction, giving a rigid mounting base for the deadbolt action once installed in the drawer. A solid brass cylinder offers stable keying and interaction with Schlage C key sections during cutting and operation. The Schlage C keyway format lets this lock operate within existing C-keyway systems, helping align cylinder fit with cores and keys already used on a site. The key removable feature in either locked or unlocked position supports cylinder handling during fit-up, since drawers can be cycled for alignment without trapping the key. The easily rekeyable design via a set screw cylinder release mechanism provides a predictable method to adjust keying after installation.
This Olympus Lock 800 Schlage C keyway pin tumbler deadbolt drawer lock fits drawer applications that call for a keyed deadbolt rather than a spring latch, giving casework builders a positive bolt throw into a dedicated strike. Oil rubbed bronze finish provides a dark, muted appearance for projects built around bronze-toned hardware, helping the lock blend with pulls and hinges in similar finishes. The ANSI/BHMA A156.11 Grade 1 performance achievement supports use in higher traffic or more demanding environments where drawers see frequent locking and unlocking cycles. Because the lock is keyed alike KA101, it suits runs of drawers where the same key number is desired for day-to-day access. The non-handed design adds flexibility across left- and right-side layouts without changing part numbers between cabinet banks.
The Schlage C keyway format allows this drawer lock to be keyed together with other Schlage C keyway locks, which streamlines keying plans when tying drawers to doors or other C-keyway hardware on the same site. The set screw cylinder release mechanism supports straightforward rekeying, giving locksmiths a defined method to remove and replace the cylinder while leaving the zinc die cast body in place. Solid brass cylinder construction works well with standard key cutting practices on Schlage C blanks, contributing to consistent pinning and reliable key turning under normal use. The key removable feature in both locked and unlocked positions helps during commissioning, since installers can lock or unlock drawers and remove the key at either state to check alignment of the deadbolt into the plastic bar strike. Grade 1 performance testing under ANSI/BHMA A156.11 provides assurance that the lock design has been evaluated to a recognized performance benchmark for deadbolt locks. The 1-3/8 inch cylinder length supports installations into thicker drawer fronts while still presenting proper cylinder face and key access at the front of the drawer.
This Olympus Lock 800S-10B138-101 uses a Schlage C keyway, so it can be keyed together with other Schlage C keyway locks on the same project.
The lock has a 1-3/8 inch cylinder length, giving the reach needed for thicker drawer fronts so the deadbolt fully engages the strike.
The lock is easily rekeyable via a set screw cylinder release mechanism, allowing cylinder changes while leaving the lock body installed.
This deadbolt drawer lock passed ANSI/BHMA A156.11 Grade 1 performance requirements, supporting use in demanding or high-cycle environments.
Standard function locks are non-handed, so the same product works on either left or right drawer configurations without different part numbers.
The lock body is zinc die cast and the cylinder is solid brass, providing a rigid housing with a brass cylinder for stable keying performance.
The Olympus Lock 800 Schlage C keyway pin tumbler deadbolt drawer lock in oil rubbed bronze offers a 1-3/8 inch cylinder length, Grade 1 performance, and non-handed operation for drawer applications. Its Schlage C keyway and keyed alike KA101 setup help align with existing key systems and simplify key control on multi-drawer installations. The easily rekeyable design with a solid brass cylinder and zinc die cast body supports long-term service on commercial or institutional jobs. For drawer runs that need a deadbolt action tied to Schlage C keying, this model delivers a focused, project-ready solution.
Sold In: 1 Each
