Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
800 Schlage C keyway pin tumbler deadbolt drawer lock describes a drawer lock that uses a Schlage C keyway pin tumbler mechanism, which gives installers a familiar key platform for keyed-alike systems across cabinets or workstations. The lock is keyed to an O-Bit key, so each cylinder is set up for that specific key pattern, supporting controlled access where that key is already in circulation. A 1-3/8 inch cylinder length positions the lock body to suit deeper drawer or door fronts, helping the cam reach the strike without awkward shimming. The lock has a bright brass finish, so the visible face presents a brass appearance that matches other bright brass hardware on the job. As a deadbolt drawer lock, it extends a solid bolt rather than a spring latch, giving a positive throw that resists casual prying on cabinet and furniture drawers.
The 1-3/8 inch cylinder length on this Olympus 800S-US3138-OBIT lock positions the cylinder face to suit thicker drawer fronts, which helps align the deadbolt throw to the strike location without modification. The set screw cylinder release mechanism lets the cylinder be removed from the zinc die cast body, so locksmiths or millwork shops can rekey or swap cylinders while leaving the body installed. Because the key is removable in either the locked or unlocked position, staff can lock a drawer and pocket the key, or unlock once and retain the key only for occasional relocking, which supports different access routines. The non-handed function means this deadbolt drawer lock installs in applications with either hand of operation, which simplifies layout choices when configuring rows of drawers.
This Olympus Lock 800 Schlage C keyway pin tumbler deadbolt drawer lock is designed to work within systems that already rely on Schlage C keyway cylinders, so shops can extend existing key platforms to new casework. Because it can be keyed together with other Schlage C keyway locks, a run of drawers, doors, and cabinets can share a common key, which cuts down on key ring complexity for maintenance or staff. The fact that it is keyed to an O-Bit key gives a defined key pattern from the start, which matters in facilities where that pattern is already assigned to a particular user group or function. Since the solid brass cylinder is compatible with Schlage compatible key-in-knob cylinders from other manufacturers, locksmiths have flexibility to match cylinders to a broader hardware set while using this zinc die cast body in millwork.
The deadbolt function on this drawer lock provides a positive bolt action, which offers a more secure feel than a spring latch when securing drawers that hold tools, documents, or supplies. Passing ANSI/BHMA A156.11 Grade 1 performance requirements shows the lock has been evaluated to a recognized performance level, giving confidence when it is specified for high-use drawers in busy environments. The bright brass finish on the cylinder face coordinates with bright brass decorative hardware, helping casework maintain a consistent appearance across knobs, pulls, and locks. The zinc die cast body supports consistent manufacturing dimensions, which helps the deadbolt line up with matching bar strikes on drawers built to standard cutouts. A solid brass cylinder works well in keying operations, so locksmiths can service these locks in the same way they handle other brass-based Schlage C keyway products on the job.
The 800 Schlage C keyway pin tumbler deadbolt drawer lock uses a Schlage C keyway and is keyed to an O-Bit key, so it fits Schlage C based keying systems using that key pattern.
The lock is easily rekeyable via a set screw cylinder release mechanism, so the cylinder can be removed from the body for rekeying without changing the entire lock assembly.
The 800S-US3138-OBIT deadbolt drawer lock uses a 1-3/8 inch cylinder length, which suits thicker drawer fronts and helps position the bolt for proper engagement with the strike.
The key on this drawer lock is removable in the locked or unlocked position, allowing users to remove the key after locking or unlocking according to their access routine.
This deadbolt drawer lock passed ANSI/BHMA A156.11 Grade 1 performance requirements, indicating it is tested to a high performance standard for drawer lock applications.
The lock body is zinc die cast and the cylinder is solid brass, combining a stable housing with a brass cylinder that supports precise keying and a bright brass appearance.
This Olympus Lock 800 Schlage C keyway pin tumbler deadbolt drawer lock brings a 1-3/8 inch cylinder, bright brass appearance, and a solid brass cylinder into a single solution for cabinet and drawer security. Its Schlage C keyway, keyed to an O-Bit key, lets you align new drawers with existing Schlage C keying plans where that pattern is already used. With ANSI/BHMA A156.11 Grade 1 performance requirements passed, a zinc die cast body, and a non-handed design, it fits commercial, institutional, or shop furniture layouts that need consistent deadbolt locking across multiple drawers.
Sold In: 1 Each
