
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Festool Rubin 2 40 grit sanding sheet is an aluminum oxide abrasive sheet sized at 3-1/8 x 5-1/4 inches, giving you a compact pad that matches Festool 80x133 mm sanders for controlled work on flat wood surfaces. The sheet uses an 8-hole pattern with hook and loop backing, so it locks onto the backing pad quickly and stays aligned during passes, which supports consistent dust extraction and sanding contact across the face. Rubin 2 is designed specifically for all wood-finishing applications, so the abrasive cut is tuned for raw wood rather than general-purpose material, which helps keep the scratch pattern predictable between grit steps. This version is P40, so it serves as the heavy-cut step for leveling, stripping, or breaking down rough surfaces before moving through finer Rubin 2 grits on the same machine.
This Rubin 2 sheet uses a hook and loop attachment system, so it mounts to matching pads with a simple press, which supports rapid grit changes while keeping the sheet firmly anchored in use. The 8-hole layout is integrated into the sheet, so when it is aligned to an 8-hole pad, dust is drawn through the holes instead of building under the abrasive, which maintains cutting efficiency and keeps the pad working cleaner. At 3-1/8 x 5-1/4 inches, matching Festool 80x133 mm sizing, the sheet tracks the full footprint of compatible rectangular pads, so sanding pressure transfers evenly across edges and corners on face frames, rails, and flat stock.
This Festool Rubin 2 40 grit 3-1/8 x 5-1/4 inch sheet is built for all wood-finishing applications, so it fits the early stages of a sanding system that is focused on bare wood, from casework to trim stock. The P40 cut positions this sheet as the aggressive step in a Rubin 2 progression, so it is well-suited to knocking down milling marks, flattening uneven joints, or starting surface preparation on rougher components before moving up through finer Rubin 2 grits. Because the abrasive formulation is tuned to shed wood fibers and limit clogging from pitch, it maintains an open face when working on common shop woods, which supports uninterrupted sanding across frames, panels, and edge work. The rectangular 80x133 mm form factor lets the sheet reach into corners and along straight edges while still covering enough area for efficient passes on cabinet parts and doors.
The Festool 499054 designation identifies this Rubin 2 80x133 P40 sheet, so repeat ordering under the same part number keeps the cut and performance identical from job to job. The 30 percent faster removal rate claimed for Rubin 2 means each stroke takes off more material, which reduces the number of passes needed to reach flat, uniform surfaces before switching grits. Up to 30 percent longer sheet life means each sheet stays productive for more sanding area, which reduces interruptions to change abrasives during longer runs and helps crews keep a steady pace on site or in the shop. The hook and loop backing works with compatible pads so that sheets are installed and removed quickly, letting users step through the Rubin 2 grit sequence efficiently while maintaining alignment with the 8-hole pattern for dust extraction. By combining wood-specific abrasive behavior, controlled cutting at P40, and consistent sizing at 3-1/8 x 5-1/4 inches, this sheet supports repeatable surface prep across multiple projects.
The Festool Rubin 2 sheet is designed for all wood-finishing applications, so it focuses on bare wood fibers, which helps deliver a predictable scratch pattern across typical cabinet and millwork parts.
The 40 grit rating makes this sheet an aggressive cut step, so it removes stock quickly, which is useful for leveling seams, stripping rough areas, or setting up the surface before finer Rubin 2 grits.
The Festool 499054 sanding sheet measures 3-1/8 x 5-1/4 inches, matching Festool 80x133 mm pads, which helps ensure full pad coverage and even pressure distribution across the sanding surface.
The hook and loop backing lets the sheet attach and release from compatible pads quickly, which supports fast grit changes while keeping the sheet stable for consistent sanding passes.
The 8-hole design aligns with matching pads so dust is drawn through the sheet, which helps reduce clogging under the abrasive and maintains more efficient cutting during extended sanding.
Rubin 2 is stated to deliver a 30 percent faster removal rate and up to 30 percent longer sheet life, which reduces sanding time and abrasive changes over the course of wood-finishing projects.
The Festool Rubin 2 40 grit 8-hole hook and loop aluminum oxide sanding sheet in 3-1/8 x 5-1/4 inch sizing delivers wood-focused cutting at the heavy-prep stage, so installers and woodworkers can drive faster removal, longer sheet life, and consistent results across repeat cabinet and millwork jobs.