Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Festool Rubin 2 180 Grit Sanding Sheet describes a 93mm 6-hole abrasive sheet built for wood-finishing applications, so it targets the sanding stages where surface quality and speed directly affect job time. The aluminum oxide construction provides a proven abrasive material that cuts consistently on wood, helping maintain a predictable scratch pattern from sheet to sheet. Rubin 2 is designed to quickly shed wood fibers, so loose fibers clear away instead of loading the surface, which keeps the grain exposed for steady cutting. This shedding action supports a 30% faster removal rate, so each pass removes more material and shortens the time spent on intermediate sanding steps. Rubin 2 is also designed to minimize clogging from pitch and fibers, so abrasive grains stay open longer, which delivers up to 30% longer sheet life. The 180 grit rating positions this sheet in the finer range for wood, so it fits well into a grit progression that moves efficiently toward finishing.
The 93mm size defines a compact sanding sheet footprint, so it suits tasks that need controlled contact on narrower faces, edges, or profiles. This scale helps operators focus pressure more precisely, which can be useful when blending surfaces without cutting into adjacent areas. The 6-hole pattern in the sheet provides a defined dust extraction layout, so when used with a matching backing pad that pattern channels sanding dust away from the work zone. By directing dust off the contact area, this hole arrangement supports the Rubin 2 goal of reducing clogging from wood fibers and pitch, which helps maintain the 30% faster removal rate over more of the sheet life. The 180 grit rating further complements this control by leaving a finer scratch that prepares wood for subsequent finishing steps in a planned grit sequence.
The Festool Rubin 2 93mm P180 sheet is intended for all wood-finishing applications, so it fits both shop and jobsite workflows that move from shaping toward final finish. At 180 grit, the sheet operates in the upper mid-grit range, so it works well after coarser leveling passes and before very fine polishing stages. The aluminum oxide abrasive interacts effectively with common woods, so it provides the cut needed to refine planer or previous grit marks without jumping directly to ultra-fine steps. Rubin 2 is designed to quickly shed wood fibers, so as cutting exposes loose fibers, they release rather than binding to the surface, keeping the abrasive face clearer while working across solid wood panels, rails, or frames. Because the sheet is oriented to wood-finishing tasks, it supports a sanding progression aimed at achieving the best possible finished surface in the least amount of time.
Rubin 2 is engineered for a 30% faster removal rate, so each sheet can remove more material over the same working time compared with standard designs, which benefits repetitive sanding runs on doors, drawer fronts, or panel work. The same Rubin 2 design is intended to prevent clogging from pitch and wood fibers, so abrasive grains remain exposed longer, helping sustain that higher removal rate instead of dropping off as the sheet loads. This anti-clogging focus also produces up to 30% longer sheet life, so a single 93mm 180 grit sheet stays in service for more surface area before change-out. That longer life reduces interruptions during sanding sequences, which can be especially helpful when moving through rapid grit progression from 80 to 220. Because Rubin 2 is built around that rapid grit progression, using the 180 grit step helps bridge between coarser leveling and finer finishing, so surfaces are brought to a high-quality state with fewer total passes.
The Festool Rubin 2 180 Grit Sanding Sheet is designed for all wood-finishing applications, so it targets solid wood sanding stages from intermediate smoothing to pre-finish preparation.
The Rubin 2 30 percent faster removal rate means each pass removes more wood, so users spend less time on each sanding level when moving through their finishing sequence.
The Rubin 2 design provides up to 30 percent longer sheet life, so each 93mm P180 sheet stays productive over more surface area before being replaced in ongoing sanding work.
The Festool 499167 sheet uses aluminum oxide as the abrasive, so it delivers a consistent cut on wood surfaces that supports predictable scratch patterns across multiple sheets.
The 6-hole layout provides a specific dust extraction pattern, so dust is drawn away from the contact area, supporting Rubin 2s reduced clogging and helping maintain cutting efficiency.
The 180 grit level sits in the finer range of a wood finishing progression, so it works after coarser grits and before very fine grits when moving from 80 to 220.
The Festool Rubin 2 93mm 180 grit 6-hole aluminum oxide sanding sheet is built around all wood-finishing applications, so it aligns with workflows that emphasize finish quality and speed. Its 30% faster removal rate and rapid grit progression support sanding sequences that move efficiently from 80 to 220, so less time is spent at each intermediate level. The Rubin 2 design focus on preventing clogging from wood fibers and pitch delivers up to 30% longer sheet life, so each sheet covers more surface before being changed. For installers and woodworkers who want a 93mm P180 sheet that blends consistent cut with time savings, this Rubin 2 option offers a focused solution for wood sanding projects.
Sold In: 1 Box