Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Bisco P-14 aligning element defines a specific Lamello alignment biscuit with a 65mm x 27mm x 7mm format, so installers work with a known standard size when planning joint layouts and tool settings. The Lamello brand identification ties this Bisco P-14 biscuit to a recognized biscuit format, helping shops keep consistency across similar alignment tasks. As a dowels and biscuits fastener, this aligning element serves as the internal locator in a joint, guiding parts into position during assembly so edges meet in a controlled way. The biscuit product class confirms that this element works as a flat internal connector, so fabricators can route matching slots and rely on the element to bridge between workpieces. The LAMELLO ALIGNMENT BISCUIT description reinforces the role of this part as an alignment-focused component, supporting projects where joint position is more critical than other fastening functions.
The defined 65mm x 27mm x 7mm size of the Lamello Bisco P-14 aligning element sets clear targets for slot geometry, so installers can dial in cutter settings before starting production cuts. Using these fixed dimensions, a shop can coordinate depth, offset, and spacing to keep joints repeatable from one part to the next. Because this Lamello alignment biscuit sits in a flat slot rather than a round bore, fabricators can plan slot orientation to manage alignment in the plane that matters most for each assembly. The biscuit classification also signals that the joint interface is broad and flat, which supports alignment along an edge rather than concentrating load in a single dowel point, helpful when parts need to register flush during glue-up or assembly.
The Bisco P-14 aligning element, described as a Lamello alignment biscuit, is positioned for applications where controlling relative position between two flat parts is important during assembly. Its 65mm length allows the biscuit to bridge a useful span between workpieces, so the element can guide both pieces into a matching plane as they come together. With a 27mm width, the biscuit offers a substantial registration surface inside the slot, which helps parts resist lateral drift while clamps bring the joint tight. The 7mm thickness directly influences the slot profile, so installers can coordinate cutter thickness and depth to keep the biscuit centered in typical panel stock. Being in the dowels and biscuits fasteners category, this Lamello element fits workflows that rely on machined slots along edges or faces, supporting layouts that repeat across cabinet parts, fixtures, or similar assemblies where alignment drives final appearance.
The precise 65mm x 27mm x 7mm format of the Lamello Bisco P-14 aligning element means each biscuit behaves consistently from joint to joint, allowing production setups to stay stable across large batches. When installers base their slot dimensions on these fixed values, they reduce the need for fit adjustments on individual parts, which shortens assembly time. The clearly defined thickness lets operators set their tools once so the biscuit seats properly without excess looseness, supporting joints that pull into position predictably. Because the element is specified as an alignment biscuit in the biscuits product class, its primary role is to position parts rather than add new mechanical features, which suits situations where other fastening methods handle structural load and this component manages registration. The manufacturer part number 145303 ties these characteristics to a single Lamello reference, so a shop can keep documentation and setups matched to the same aligning element across repeat jobs.
The Bisco P-14 aligning element acts as a Lamello alignment biscuit in machined slots, guiding two parts into a consistent position so edges meet as planned during assembly.
The 65mm x 27mm x 7mm size defines slot length, width, and depth targets, so installers can set cutters to match the biscuit and keep alignment consistent across joints.
The Lamello Bisco P-14 is classified as a biscuit in the dowels and biscuits category, so it functions as a flat element seated in routed slots between mating parts.
This Lamello alignment biscuit is in the fasteners dowels and biscuits category because it serves as an internal connector that positions workpieces during assembly.
The Lamello part number 145303 uniquely identifies this specific Bisco P-14 aligning biscuit, helping shops match the same element when reordering for repeated projects.
Using the defined Bisco P-14 size lets operators standardize slot tooling and setups, which supports repeatable alignment and reduces variation across multiple assembled parts.
The Lamello Bisco P-14 aligning element, with its 65mm x 27mm x 7mm biscuit format, gives professional installers and serious DIY users a defined alignment component for slot-based joints. Specifying this Lamello alignment biscuit by part number 145303 lets shops tie drawings, tooling, and reorder steps to a single standard element. For projects that rely on dowels and biscuits to control position between parts, choosing this alignment biscuit supports smoother layouts and more predictable assembly results.
Sold In: 1 Box