Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Salice glass door hinge CBG1AC9 is a free swinging hinge for glass doors, so it supports full, unassisted movement of the panel during normal opening and closing. The screw-on design gives a straightforward mechanical connection to the cabinet, which helps installers anchor the hinge securely into the case material. No drilling of the glass is required, so the glass panel stays intact with no edge weakening from cutouts. A 110 degree opening angle lets the door clear adjacent hardware more easily, which helps when doors must open wide for access or hardware adjustments. The hinge is part of the Salice America range of glass door hinges, so it fits workflows already using this product class on similar glass fronts.
The screw-on configuration on this glass door hinge provides a direct fastened connection to the cabinet structure, which gives the installer positive control over hinge placement during layout. Compensated side adjustment from -1.5 mm to +4.5 mm allows lateral fine-tuning of the door position, which helps tighten reveals or align multiple doors in a run. Height adjustment of plus or minus 2 mm lets the door be shifted up or down on the cabinet, which is useful to match lines with neighboring doors or adjacent decorative elements. Depth adjustment with Series 200 mounting plates of +2.8 mm supports front-to-back alignment of the glass relative to the case, which helps obtain the desired overlay and closing feel.
This hinge for glass doors is suited to applications where the door must swing freely through its 110 degree opening range, such as display cabinets or upper units that require wide access. The possible fixing inset distance K from 0 to 22 mm means the hinge can be positioned to match different door overlays, which supports use across a mix of cabinet depths and face layouts. Compatibility with all traditional Series 200 mounting plates makes it well suited to installations already standardized on those plates, because the same casework drilling pattern can be followed from project to project. When used with Domi snap-on mounting plates, the hinge can be engaged or removed at the plate, supporting jobs that benefit from fast door removal during finishing or interior fitting.
The compensated side adjustment from -1.5 mm to +4.5 mm lets the installer nudge the glass door left or right after installation, which helps correct small layout variances without redrilling the cabinet. The plus or minus 2 mm height adjustment provides vertical movement of the mounted door, so joint lines and sight lines can be tightened across banks of doors. Depth adjustment of +2.8 mm with Series 200 mounting plates allows the door-to-face alignment to be dialed in, which is useful when working with varying door thicknesses or interior components. With Domi snap-on mounting plates, depth adjustment from -0.5 mm to +2.8 mm gives additional front-to-back flexibility, helping to achieve consistent closing pressure along the run. An anti-sliding safety stop is built in, which resists unintended glass movement at the hinge interface, supporting stable positioning during adjustment and everyday use.
The Salice CBG1AC9 hinge is a hinge for glass doors, so it is intended specifically for mounting glass door panels in cabinet and similar installations.
The CBG1AC9 hinge for glass doors requires no drilling of the glass, allowing the panel to remain unbored while still securing the door at the hinge location.
The CBG1AC9 glass door hinge has a 110 degree opening, allowing the door to swing wide for access and reducing interference with adjacent components.
The Salice CBG1AC9 hinge is compatible with all traditional Series 200 mounting plates and with all Domi snap-on mounting plates, supporting different mounting systems.
The hinge offers compensated side adjustment from -1.5 mm to +4.5 mm, height adjustment plus or minus 2 mm, and depth adjustment ranges defined for Series 200 and Domi plates.
The possible fixing inset distance K from 0 to 22 mm lets you position the hinge relative to the glass edge, influencing overlay and alignment with the cabinet front.
The Salice glass door hinge CBG1AC9 combines free swinging operation, no-drill glass attachment, and a 110 degree opening angle, giving installers control over movement and access. Its side, height, and depth adjustments, along with compatibility with Series 200 and Domi snap-on mounting plates, support precise alignment across many cabinet layouts. For projects needing a screw-on hinge solution dedicated to glass doors, this hinge offers defined adjustment ranges and mounting interfaces that align with established Salice America systems.
Sold In: 1 Each