
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Belwith Keeler self-close face mount hinge describes a semi-concealed hinge that mounts on the surface of a face frame and door, so it supports straightforward installation on cabinets that use surface face mounted hardware. The hinge is identified as self-close, which means the internal spring action pulls the door shut at the end of travel, helping doors stay against the frame without relying only on knobs or pulls. Being a semi-concealed hinge keeps part of the hardware visible while the working portions sit out of direct sight, which maintains a traditional cabinet appearance while still controlling door movement. The product is cataloged as a face mount hinge, so the leafs sit directly on the frame and door faces, which simplifies layout because the installer works from outside reference faces instead of recessing cups or mortises.
The hinge is described as screw-on, indicating it fastens to the door and frame using 8-32 x 1 inch screws through the hinge leaves, which supports a mechanical attachment that can be driven with common tools. This product is classified as a surface face mounted hinge, so installation uses the exterior surfaces of the face frame and door rather than recesses, which can reduce layout complexity on job sites. The semi-concealed classification means the installer positions some of the hinge behind the door edge while leaving part of it exposed, balancing appearance with straightforward mounting. Because the hinge projects 7/16 inch, the installed door sits a known distance from the frame face, which helps align multiple doors to a consistent reveal along a run of cabinets.
This hinge is in the semi-concealed hinges product class, so it suits cabinets where part of the hinge is intended to remain visible while the working knuckle is partially hidden, fitting many traditional face-frame layouts. The web description notes the collection as surface face mounted, which supports use on cabinets designed for hinges that mount directly to the frame face instead of inside the box. Antique brass finish on the visible steel hinge surfaces gives a classic tone that complements stained woods and other warm finishes commonly found in kitchens, baths, or built-ins using face frames. With a width of 1-13/16 inches and length of 2-13/16 inches, the hinge footprint works on many cabinet doors where moderate leaf size is preferred for proportion and bearing area. The projection of 7/16 inch moves the door slightly off the frame, which helps create working clearance so doors can swing freely without binding against the frame edge.
The hinge is identified as a Belwith Keeler semi-concealed face mount hinge, so door motion happens around a predictable pivot point near the frame face, which supports consistent reveals across multiple openings when layout is repeated. The self-close description indicates an internal closing action that draws the door toward the frame, reducing the tendency for doors to rest partially open after use. Using steel as the hinge material means the knuckle and leaves are built from a strong metal, which maintains alignment of the 7/16 inch projection dimension under typical cabinet loads. The 7/16 inch center to center spacing between mounting holes provides a defined pattern, which helps installers set up jigs or templates when producing several doors with identical hinge locations. With 8-32 x 1 inch screws listed for this hinge, the mounting method relies on threaded fasteners that clamp the hinge tightly to the cabinet and door surfaces, supporting long-term stability in everyday operation.
The P139-AB is a Belwith Keeler semi-concealed surface face mounted hinge, so it works on face-frame cabinets where the hinge mounts on the surface and part of the hardware remains visible.
The self-close function uses the hinge mechanism to pull the door shut near the end of travel, helping doors rest against the frame after use without relying on heavy slamming.
This hinge has an antique brass finish, so the visible parts show a warm, traditional color that coordinates with classic cabinet styles and matching antique brass hardware.
The hinge length is 2-13/16 inches, the width is 1-13/16 inches, projection is 7/16 inch, and the center to center hole spacing is 7/16 inch, guiding layout and clearances.
The 7/16 inch projection positions the door slightly off the frame face, providing a controlled gap that supports swing clearance and consistent reveals along a cabinet run.
This hinge uses 8-32 x 1 inch screws through the hinge leaves, giving a threaded attachment that secures the hinge tightly to the cabinet frame and door surfaces.
The Belwith Keeler self-close face mount hinge P139-AB pairs a semi-concealed design with surface face mounted installation, giving cabinet builders a hinge that works from the face frame without mortising. The antique brass finish presents a traditional look while the 2-13/16 inch by 1-13/16 inch steel body provides a defined footprint for laying out doors. With 7/16 inch projection and 7/16 inch center to center spacing, it offers predictable clearances and mounting patterns, so cabinet runs can be planned around consistent reveals. When a self-close, surface face mounted hinge in antique brass fits the project requirements, this model is positioned as a practical option for face-frame cabinet work.
Sold In: 1 Pair