Clamex P-14/10 Medius 64mm x 13.5mm x 9.7mm/52mm x 7.5mm x 9.7mm Dividing Panel Connector, Box of 80 Sets

Clamex P-14/10 Medius Dividing Panel Connector Use

Clamex P-14/10 Medius is a Lamello dividing panel connector set designed for joining panel sections using biscuit-style fasteners, which helps cabinet and fixture builders align dividing panels consistently. The connector is classified under fasteners, in the dowels and biscuits product class, so it works as part of a precise joinery system rather than a surface bracket. The Medius version is identified as a dividing panel connector, which supports layouts using intermediate or center panels in casework and interior fittings. The product is supplied as a pair of 300, which suits production runs where repeated use of the same connector format keeps panel junctions uniform. The Clamex P-14/10 Medius designation and Lamello branding tie directly to established biscuit-based joinery methods, giving installers a familiar format when planning slots and panel edges.

Dividing Panel Connector Details For Project Planning

• The connector is described as a dividing panel connector, which allows builders to create fixed relationships between panels where a clean joint line is required in cabinets or partitions.
• The product is categorized as a fastener in the dowels and biscuits class, so it functions as an embedded joining element that relies on machined recesses rather than external framing.
• The set is listed as a pair of 300, which supports jobs that need a consistent connector style across many panels, helpful for repeatable layouts and standardized drilling or slotting patterns.
• The Lamello brand is specified, which aligns this connector with Lamello biscuit-based joinery workflows that many woodworking shops already use in panel processing.
• The manufacturer part number 145371 uniquely identifies this Clamex P-14/10 Medius version, helping specifiers match drawings, ordering, and on-site installation to the same connector.

Lamello Clamex P-14/10 Medius Installation Fit

The Clamex P-14/10 Medius connector uses biscuit-style geometry within the dowels and biscuits category, so installation depends on accurately machined panel slots that accept the connector body. One connector size is specified as 64mm x 13.5mm x 9.7mm, which defines the length, width, and thickness envelope that must be allowed in the panel edge for reliable seating. The second connector size is listed as 52mm x 7.5mm x 9.7mm, so installers can plan a corresponding, slimmer recess where this matching part locates. Because both parts share a 9.7mm dimension, panel processing can reference this thickness when setting tool depths for consistent fit and flush joints. The Medius dividing panel function means these dimensions directly influence where and how intermediate panels connect inside a cabinet or partition grid.

Using Clamex P-14/10 Medius In Panel Work

Where This Dividing Panel Connector Is Applied

The Clamex P-14/10 Medius is identified as a dividing panel connector, which places it in applications where interior panels need to intersect or divide space within cabinets, shelving units, or similar constructions. Being part of the biscuits product class, it operates inside machined slots in the panel material, so it suits work where hidden joints are preferred over surface-mounted brackets. The two specified body sizes, 64mm x 13.5mm x 9.7mm and 52mm x 7.5mm x 9.7mm, let installers position mating parts inside corresponding recesses, which supports precise panel intersection geometry. As a Lamello connector, it fits naturally into workflows already using Lamello biscuit machinery and layout practices, connecting to established shop processes for cutting consistent slots along panel edges and faces.

Why Connector Dimensions Matter For Repeatable Results

The 64mm x 13.5mm x 9.7mm connector body size gives a defined footprint in the panel, which helps designers specify exact edge distances and spacing between multiple connectors along a joint. The companion 52mm x 7.5mm x 9.7mm size creates a complementary recess geometry, letting fabricators map each part to its matching cut so assembly on site follows a predictable pattern. Because both connector components share the same 9.7mm thickness, tooling depth settings can be standardized, reducing adjustments when alternating between the two parts within a project. The pair-of-300 quantity supports production environments where identical joints are repeated across many dividing panels, with the fixed dimensions helping CNC programs or jigs produce the same fit on every part. The manufacturer part number 145371 ties these characteristics to a single specifiable item, simplifying reordering when the same joint configuration is required on future jobs.

Common Questions About Clamex P-14/10 Medius Connectors

Select Clamex P-14/10 Medius For Panel Joinery

The Clamex P-14/10 Medius dividing panel connector from Lamello combines a biscuits-class fastener format with defined body sizes of 64mm x 13.5mm x 9.7mm and 52mm x 7.5mm x 9.7mm, so panel recesses can be programmed around known dimensions. As a pair of 300 under manufacturer part number 145371, it aligns well with cabinet shops and fit-out contractors planning repeatable dividing panel joints across multiple units. For projects needing consistent internal panel connections using Lamello-style biscuit joinery, this connector set offers a clearly specified format that links design intent, machining setups, and on-site assembly.