Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Clamex P-10 interlocking connector is a 52mm x 19mm x 9.7mm Lamello biscuit-class fastener designed to lock two workpieces together, giving you a repeatable, accurately positioned joint in panel and furniture projects. The 52mm length sets the engagement depth so both sides pull together consistently across a run of joints. The 19mm width gives a defined bearing area in the groove, which helps keep alignment steady under load. The 9.7mm thickness determines the groove profile, so every cut that matches this size will locate the connector the same way from piece to piece. Being an interlocking connector, it is built to mechanically key the mating parts, which helps resist joint movement in day-to-day use. As a Lamello product, it matches the biscuit fastener format many shops already use, so it fits naturally into fast-paced cabinet and millwork workflows.
This Lamello Clamex P-10 connector uses its 52mm x 19mm x 9.7mm geometry to guide your groove layout, so once you set up for that footprint, every joint lands in the same position. The 52mm dimension controls how far the connector extends into each workpiece, which keeps both sides balanced and helps avoid over-cutting in thinner panels. The 19mm width dictates the lateral groove size, supporting accurate fence settings along cabinet edges. The 9.7mm thickness translates directly to groove depth and cutter height, which helps you standardize on one reliable setup. As a biscuit-class interlocking connector, it is intended for slot-based installation, so your existing biscuit-style workflow can be oriented around these defined measurements.
The Clamex P-10 52mm x 19mm x 9.7mm interlocking connector fits work where you want a biscuit-format fastener to locate and lock panel components. In cabinet runs, the 52mm length supports consistent engagement in side-to-bottom or partition joints, helping panels register in line. In furniture assemblies that rely on panel construction, the 19mm width works well along edges, keeping groove placement consistent when you repeat cuts on rails or stretchers. The 9.7mm thickness suits applications that revolve around a fixed groove size, so once your tooling matches that dimension, you can move through multiple parts without altering settings mid-job.
The defined 52mm x 19mm x 9.7mm format of this Lamello biscuit fastener gives you clear machining targets, which supports accurate, repeatable production. When the 52mm length is matched in your layout, every connector engages the same way, reducing variation from cabinet to cabinet. The 19mm width provides enough bearing surface in the groove to help stabilize components as you bring them together, which supports cleaner reveals along faces and edges. The 9.7mm thickness links directly to your chosen cutter or slotter size, so a single, dialed-in setup can be used across an entire project. As part of the Clamex P-10 interlocking connector family, this geometry delivers a predictable mechanical connection that fits biscuit-style slot machining while helping you maintain consistent quality from the first joint to the last.
The Clamex P-10 145372 is a Lamello interlocking connector in the biscuit product class, so it functions as a biscuit-style fastener that mechanically links two workpieces.
The 52mm length defines how far the connector reaches into each panel, which supports balanced engagement and helps keep cabinet or furniture joints consistent across a project.
The 19mm width sets the groove width for this connector, which creates a stable seating area that helps limit side-to-side play and supports flush panel alignment.
The 9.7mm thickness defines the slot size required, so once tooling is matched to that thickness, the same setup can be used repeatedly on multiple workpieces.
The interlocking connector design lets the Clamex P-10 mechanically key panels together, which supports joint stability in cabinet and panel-based furniture construction.
The Lamello brand identifies this connector as part of a recognized biscuit-class system, which aligns it with slot-based woodworking workflows used in many shops.
The Clamex P-10 interlocking connector from Lamello offers a defined 52mm x 19mm x 9.7mm format that fits biscuit-style, slot-based woodworking. When your work depends on repeatable panel joints and clear groove dimensions, this connector aligns with those needs. The geometry ties directly to your machining setup, supporting consistent cabinet, furniture, and panel assemblies. Use this part number 145372 when you want to match projects that rely on the same size and interlocking connection style.
Sold In: 1 Box