Divario P-18 connector from Lamello is an invisible self-clamping connector designed for slide insertion, giving installers a concealed fastening option where visible hardware is not desired. The connector size of 75mm x 25mm x 9.7mm fits projects that call for a biscuit-style fastener with defined dimensions, so layouts can be repeated accurately across runs of cabinets or furniture components. As part of the biscuits class of fasteners, this connector works as a locating and joining element between workpieces, helping keep parts aligned as they are brought together. Being self-clamping means the connector is designed to hold mating parts under tension once engaged, reducing the need for separate clamping where the joint geometry supports that function. The invisible design keeps the connector out of sight in the finished assembly, which supports clean-looking installations where the joint line should remain unobstructed.
The Divario P-18 invisible self-clamping connector is designed for slide insertion, so one workpiece engages the connector by being moved along its length into final position. The defined size of 75mm x 25mm x 9.7mm helps installers plan matching recesses or grooves that accommodate the connector profile, supporting repeatable machining setups on routing or slotting equipment. As a biscuit-class fastener, it is intended to bridge between two parts, so its geometry supports locating both components in relation to each other during the slide-in motion. The self-clamping function contributes holding force inside the joint as the connector reaches full engagement, which supports solid seating of the parts when the slide-in travel is completed.
The Divario P-18 75mm x 25mm x 9.7mm invisible self-clamping connector for slide insertion from Lamello fits into woodworking jobs that use biscuit-style joints and benefit from hidden connectors. Because it is categorized as a biscuit fastener, it plays a familiar role for shops already using biscuit slots as part of their joinery process. The 75mm length provides a clear reference when laying out multiple connectors along cabinet sides or furniture components, so spacing and edge distances can follow a consistent pattern across each batch. At 25mm wide, the connector offers a stable footing inside its groove, which supports panel-to-panel alignment when the mating part is slid into place. The 9.7mm thickness defines how deep the connector sits in the material, guiding tool setup so that the fastener body is fully housed while the joint closes to its final position.
The invisible self-clamping connector design of the Divario P-18 means that once the slide insertion is complete, the fastener is concealed inside the joint and applies internal clamping force. This configuration supports assemblies where visible hardware would interrupt the design line, such as finished cabinet faces or furniture panels. Because the connector is specifically described as for slide insertion, installers can plan assembly sequences that use a linear motion to lock parts together, which can simplify access in tight spaces where swinging parts into position is difficult. The biscuit-class classification signals that the connector functions as a bridging element set into prepared slots, so existing biscuit joinery workflows can be adapted to its dimensions. The combination of defined 75mm length, 25mm width, and 9.7mm thickness helps keep machining and assembly predictable, reducing layout variation when repeating the same connection style across a project run.
The Divario P-18 is an invisible self-clamping connector in the biscuits product class, so it acts as a concealed bridging fastener between parts while also applying clamping force inside the joint.
The Divario P-18 is designed for slide insertion, meaning one workpiece is moved along the connector into final position, which supports linear assembly motions in cabinetry and furniture builds.
The Divario P-18 connector measures 75mm x 25mm x 9.7mm, so installers can size grooves or recesses to those dimensions for consistent seating and repeatable joint geometry.
The Divario P-18 is described as invisible because it is a self-clamping connector that sits concealed inside the joint after assembly, supporting clean-looking installations without exposed fasteners.
The Divario P-18 self-clamping connector applies holding force inside the joint once engaged, helping keep mating parts under tension and supporting a tight fit where the joint geometry is correctly prepared.
The Divario P-18 connector is manufactured by Lamello, and Wurth Baer Supply offers it under manufacturer part number 145570 for woodworking fastener applications.
The Divario P-18 75mm x 25mm x 9.7mm invisible self-clamping connector for slide insertion from Lamello gives shops a biscuit-class fastener that supports concealed, slide-in joints. When a project calls for a joint where the hardware should remain hidden and assembly benefits from a linear slide motion, this connector provides dimensions and a self-clamping action tailored to that style of construction. For woodworking professionals sourcing through Wurth Baer Supply, the Divario P-18 under part number 145570 offers a defined, repeatable connector format that can be integrated into established machining workflows.
Sold In: 1 Box