Tenso P-10 self-clamping connector defines this Lamello biscuit-style fastener as a dedicated solution for gluing thin materials where traditional joints are limited by thickness. The stated dimensions of 52mm x 19mm x 9.7mm establish a compact connector size that suits slim panel constructions, helping you maintain strength without oversizing the joint. As a self-clamping connector, it is designed to apply internal clamping force during gluing, which supports consistent bond pressure in areas where external clamps are awkward or impossible to use. Being part of the biscuits class in the fasteners category means it slides into machined slots rather than relying on surface-mounted hardware, so the joint stays concealed and clean for finished furniture, casework, or similar projects using thin stock.
This Tenso P-10 self-clamping connector works as a biscuit-class fastener, so it is intended to sit in machined recesses that match its 52mm x 19mm x 9.7mm size, guiding how you set up your tooling. Because it is designed for gluing thin materials, joint layouts typically keep the slot centered in slimmer panels, using the connector body as an internal clamp to hold parts together while adhesive sets. The self-clamping function means the connector is part of the pressing system itself, so once the slots are cut, the installation process becomes a matter of applying glue, inserting the Tenso P-10 halves, and bringing the thin components into alignment for a controlled, repeatable joint.
The Tenso P-10 52mm x 19mm x 9.7mm self-clamping connector for gluing thin materials is suited to assemblies where panel thickness limits traditional joinery, such as slim cabinet components, light furniture elements, or decorative panels. Its biscuit classification means you work with standard-style slots rather than face-mounted brackets, which keeps the connector invisible in the finished piece and preserves clean lines on exposed surfaces. Because the connector is self-clamping, it is particularly relevant where clamping space is restricted, letting the connector inside the joint provide the primary pressure for the glue line. That characteristic supports more efficient assembly of multiple thin parts on a bench, since each joint carries its own integrated clamping action as soon as components are pressed together.
The defined dimensions of 52mm length, 19mm width, and 9.7mm thickness give you exact targets for slot geometry, which helps standardize machine setups across runs of thin components. As a Lamello Tenso P-10 connector, it stays within a known system of biscuit-style joinery, so once tooling is dialed in, you can repeat the same cuts with confidence that the connector will seat properly. Its role as a self-clamping connector for gluing thin materials means every installed piece is both a locator and a clamp, reducing joint shift during curing and supporting consistent reveals and alignments. Being supplied as a pair of 1000 implies a large-count configuration, which suits shops or serious DIY users planning significant volumes of thin-panel assembly around a single connector specification.
The Tenso P-10 self-clamping connector is classified under biscuits, so it is designed for slot-based joints where the connector sits inside machined recesses between thin materials.
The 52mm x 19mm x 9.7mm size defines the slot geometry, guiding cutter setup and ensuring the connector fits snugly while leaving sufficient strength in thin panels.
The Tenso P-10 is described as self-clamping because it is intended to provide its own internal clamping force during gluing, helping press thin materials together along the joint.
The Tenso P-10 connector is specified for gluing thin materials, making it appropriate wherever reduced panel thickness drives the need for a compact, internal biscuit-style fastener.
Being in the biscuits product class means the Tenso P-10 installs in cut slots rather than on the surface, so installation focuses on accurate slotting and alignment of matching recesses.
The manufacturer part number 145438 identifies this specific Lamello Tenso P-10 52mm x 19mm x 9.7mm self-clamping connector configuration for gluing thin materials.
The Lamello Tenso P-10 52mm x 19mm x 9.7mm self-clamping connector for gluing thin materials offers a defined, biscuit-style format when you need internal clamping in slim panels. With its slot-based installation and compact dimensions, it supports clean, concealed joints while maintaining strength in reduced panel thickness. For shops and serious DIY users planning multiple assemblies around one thin-material connector standard, this Tenso P-10 pair of 1000 provides a consistent fastener reference for ongoing work.
Sold In: 1 Box