Kitchen Kompact Chadwood wall corner cabinet brings a 36 inch wide, 30 inch high, and 12 inch deep wall corner unit into a run, so an upper corner can be finished with a matching recessed panel style. The Chadwood design uses flat panel oak doors, which keeps the look consistent with other Chadwood cabinets in the same space. The cabinet is built as a wall corner unit, so it is intended for upper kitchen layouts where two runs meet. The recessed panel style is formed by a flat panel plywood insert with a three-ply panel and a rotary cut red oak veneer face, creating a uniform oak grain appearance that ties in with other red oak components. This cabinet follows the Kitchen Kompact product class, so it aligns with that line when planning a full kitchen.
The Kitchen Kompact 36 inch wide Chadwood wall corner cabinet is designed as a wall cabinet, so it mounts to structural wall framing through the solid wood hanging strips at the top and bottom. These solid strips present continuous wood mounting areas across the cabinet width, helping fasteners bite into wood rather than just thin material when positioning the corner. The 30 inch height fits standard wall cabinet layouts above a base run, so it can align with adjacent Kitchen Kompact wall units in height. The 12 inch depth keeps the corner cabinet in line with common wall cabinet depths, which helps maintain a straight front plane when other wall cabinets are tied into the corner.
The Kitchen Kompact 36 inch by 30 inch by 12 inch Chadwood wall corner cabinet fits upper kitchen corners where two wall runs meet and a recessed panel oak style is planned. Its wall corner design allows it to receive adjoining wall cabinets on both exposed sides, creating a continuous Kitchen Kompact Chadwood look as the run turns the corner. The flat panel plywood insert with rotary cut red oak veneer face ensures the visible door panels show consistent oak grain along the corner, which matters when matching nearby red oak doors and trim. Oak flat panel doors maintain the recessed panel appearance across the full width, so the corner does not visually break the Chadwood style. Because it is part of the Kitchen Kompact product class, the cabinet integrates into layouts that use other Kitchen Kompact pieces for a unified project.
The mortised and tenoned solid 3/4 inch oak door frames on the Chadwood wall corner cabinet create tight joints at door rails and stiles, supporting square alignment of the doors over time which helps doors close evenly along adjacent units. Solid wood corner blocks that are glued and power nailed reinforce the cabinet box, so the case stays square under the weight of contents and the stresses of wall mounting. Solid wood hanging strips at the top and bottom provide defined mounting zones where fasteners can be driven across the width of the cabinet, supporting repeatable hanging practices from one job to the next. Concealed, self-closing hinges keep the hardware hidden when doors are shut and draw the doors closed without manual latching, which helps doors sit flush and consistent along a line of Kitchen Kompact wall cabinets. The adjustable shelves inside allow the installer or owner to change shelf spacing later, which helps the corner cabinet remain useful as storage needs change without altering the cabinet structure.
The Chadwood CW36WC wall corner cabinet is 36 inches wide, 30 inches high, and 12 inches deep, so it matches standard wall cabinet runs in typical kitchen layouts.
The door frames are solid 3/4 inch oak with mortised and tenoned construction, giving the doors a rigid structure that supports long-term opening and closing on an upper run.
The Chadwood wall corner uses a flat panel plywood insert with a three-ply panel and rotary cut red oak veneer face, creating a stable recessed panel with a consistent oak grain appearance.
The cabinet uses solid wood hanging strips at the top and bottom, giving continuous wood zones for wall fasteners that help support the cabinet weight in service.
The Chadwood wall corner cabinet uses concealed, self-closing hinges, so the hardware is hidden from the front and the doors are pulled closed to a consistent resting position.
The cabinet finish uses a four step process of stain, sealer, sanding, and a catalyzed top coat, creating a layered protective surface on the oak components.
The Kitchen Kompact Chadwood 36 inch by 30 inch by 12 inch wall corner cabinet provides a recessed panel oak solution for upper corners using the CW36WC configuration. Its mortised and tenoned solid 3/4 inch oak door frames, solid wood corner blocks, and solid wood hanging strips create a cabinet structure suited to wall mounting in active kitchen spaces. The three-ply flat panel insert with rotary cut red oak veneer face and four step stain, sealer, sanding, and catalyzed top coat finishing process give the visible faces a coordinated red oak appearance. When a Kitchen Kompact Chadwood wall corner is needed to complete a corner run, this CW36WC unit aligns with that line so the layout can move forward with a consistent style.
Sold In: 1 Each