Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Kitchen Kompact Chadwood wall cabinet is a 30 inch wide, 18 inch high and 12 inch deep wall unit designed for kitchen installations where those dimensions line up with the run. The recessed panel style uses oak flat panel doors, so the look stays consistent with other Chadwood pieces using the same door profile. Door frames use mortised and tenoned construction in solid 3/4 inch oak, which builds a solid joint at the corners that holds alignment under regular door use. Solid wood corner blocks are glued and power nailed, tying cabinet sides together for a rigid box that resists racking during mounting. A flat panel plywood insert uses a three-ply panel with a rotary cut red oak veneer face, bringing a real-wood veneer surface that stains and finishes in line with the rest of the cabinet. Solid wood hanging strips on the top and bottom create firm mounting points for installation to wall studs.
This Kitchen Kompact wall cabinet uses solid wood hanging strips located on both the top and bottom, so installers have substantial wood to fasten through when securing the cabinet to wall framing. That continuous strip arrangement supports even load transfer along the width during mounting. The doors operate on concealed, self-closing hinges, which tuck the hinge mechanism inside the cabinet while drawing the doors shut in a controlled motion. That hinge style supports a clean face appearance across adjoining cabinets and consistent closing feel. Mortised and tenoned solid 3/4 inch oak door frames give the hinges a solid anchoring point, helping the door edges track true at the reveals after mounting and during regular use. Together these details create a wall cabinet that aligns cleanly in a run and maintains door action over time.
The CW30Y Chadwood 30 inch wall cabinet is sized at 30 inches wide, 18 inches high, and 12 inches deep, so it fits standard upper cabinet layouts using that footprint over counters or appliances. Solid wood hanging strips at the top and bottom give carpenters defined fastening zones for tying the cabinet into wall studs along the full length, which supports level runs when setting multiple cabinets side by side. The recessed panel style with oak flat panel doors and a rotary cut red oak veneer face on the panel ties visually into other Kitchen Kompact Chadwood units that share the same material and door treatment. That matching appearance helps keep a uniform look across upper runs, corners, and shorter cabinets where an 18 inch height is required, such as above windows or specific appliances.
Mortised and tenoned construction in the solid 3/4 inch oak door frames gives installers predictable squareness at the door perimeter, which matters when aligning reveals between neighboring wall cabinets. Solid wood corner blocks that are glued and power nailed reinforce the box, so it stays square as it is lifted, clamped, and fastened, reducing adjustment time on site. The three-ply plywood insert with a rotary cut red oak veneer face offers a stable panel that reacts consistently with the 4 step stain, sealer, sanding, and catalyzed top coat process, supporting a uniform finish from frame to center panel. Adjustable shelves give flexibility once the cabinet is hung, allowing the interior to be set for various kitchen loads without changing the cabinet itself. Concealed, self-closing hinges maintain a clean exterior while helping doors land fully closed, supporting a consistent finished line across the entire upper cabinet run.
The Kitchen Kompact Chadwood wall cabinet measures 30 inches wide, 18 inches high, and 12 inches deep, so it lines up with upper cabinet runs designed around that footprint.
The cabinet doors use mortised and tenoned solid 3/4 inch oak frames with a flat panel plywood insert, giving strong frame joints around a stable center panel.
The cabinet uses solid wood corner blocks that are glued and power nailed, creating rigid corners so the box stays square during handling and wall mounting.
The cabinet receives a 4 step process of stain, sealer, sanding, and catalyzed top coat, building a finished surface over the oak and red oak veneer.
The doors use concealed, self-closing hinges, so hinge hardware stays hidden while the mechanism pulls the doors closed at the end of travel.
The Chadwood wall cabinet uses adjustable shelves, allowing the installer or user to position shelf heights to suit different dishes or pantry items.
The Kitchen Kompact Chadwood wall cabinet in CW30Y gives a 30 inch wide, 18 inch high, 12 inch deep option with recessed panel oak doors that match the Chadwood line. Solid 3/4 inch oak door frames, solid wood corner blocks, and solid wood hanging strips support a rigid, mountable box with stable door action. The three-ply plywood insert with rotary cut red oak veneer face, combined with the 4 step stain, sealer, sanding, and catalyzed top coat process, brings a consistent finish across the face. Adjustable shelves and concealed, self-closing hinges round out the interior function and exterior look, ready to slot into upper cabinet runs built around these dimensions.
Sold In: 1 Each