Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Kitchen Kompact Warmwood wall cabinet WW30R is a 30 inch wide, 21 inch high, 12 inch deep wall cabinet designed to build a Warmwood upper run with a recessed panel look. The door frames use mortised and tenoned construction in solid 3/4 inch maple, which creates a tight, square joint that holds alignment through repeated opening and closing. Solid wood corner blocks are glued and power nailed at the joints, which braces the cabinet box so it stays rigid when fastened to the wall. The door design uses a flat panel plywood insert, built as a three-ply panel with a rotary cut hard maple veneer face, giving the Warmwood finish a consistent grain pattern across the panel. Maple flat panel doors complete the recessed panel style so installers can match other Kitchen Kompact Warmwood cabinets in the same job.
This Kitchen Kompact 30 inch Warmwood wall cabinet uses solid wood hanging strips located on the top and bottom of the cabinet, giving two continuous mounting rails for fastening into wall structure. The concealed, self-closing hinges mount the maple flat panel doors to the cabinet, and the self-closing action draws the doors shut to a repeatable stop, which helps maintain an even face alignment in a run of Warmwood cabinets. Adjustable shelves inside the cabinet can be positioned to different heights, so installers can align shelf locations across neighboring units during layout. The three-ply flat panel plywood insert with rotary cut hard maple veneer face and the four step stain, sealer, sanding, and catalyzed top coat finish system are applied at the factory, so the cabinet arrives with the Warmwood color and sheen already integrated into the doors and face.
The Warmwood WW30R wall cabinet is sized at 30 inches wide, 21 inches high, and 12 inches deep, which suits use as an upper cabinet in kitchen layouts that call for a shorter wall height or space above. The door frames in solid 3/4 inch maple present a substantial face frame for the Warmwood finish, and the flat panel plywood insert provides the recessed panel detail that coordinates with other Kitchen Kompact Warmwood cabinets. Solid wood hanging strips at the top and bottom give the installer two structural rails across the width, so the cabinet can tie into framing along the full length. Inside, adjustable shelves support different dish or pantry storage patterns, letting the cabinet serve various wall positions in the kitchen while keeping a consistent Warmwood appearance.
The mortised and tenoned construction of the solid maple door frames means each corner is locked with a joinery method suited for repeated door motion, which helps maintain tight gaps between doors in long cabinet runs. Solid wood corner blocks that are glued and power nailed reinforce the cabinet box, so the case resists racking when lifted, clamped, and fastened alongside adjacent units. The flat panel plywood insert, built as a three-ply panel with a rotary cut hard maple veneer face, gives a stable panel with a continuous maple surface for the Warmwood finish system. The four step process of stain, sealer, sanding, and catalyzed top coat creates a layered finish, so the Warmwood tone and top coat are integrated throughout the doors and visible face areas. Concealed, self-closing hinges keep hardware hidden while pulling the doors closed to the same point, supporting an even reveal across multiple cabinets. Adjustable shelves add flexibility for end users while allowing installers to keep shelf lines visually consistent from cabinet to cabinet in the same Warmwood run.
The Warmwood WW30R wall cabinet measures 30 inches wide, 21 inches high, and 12 inches deep, so it fits upper wall runs designed around that standard cabinet footprint.
The Warmwood WW30R door frames are solid 3/4 inch maple using mortised and tenoned construction, giving a strong, square frame suited to frequent door use.
The recessed panel uses a flat panel plywood insert built as a three-ply panel with a rotary cut hard maple veneer face, providing a stable panel with a consistent maple grain.
The Kitchen Kompact Warmwood cabinet doors use concealed, self-closing hinges, so the hardware remains hidden while drawing the doors closed to a consistent position.
The Kitchen Kompact Warmwood wall cabinets use solid wood hanging strips at the top and bottom, providing continuous mounting rails across the cabinet width.
The Warmwood WW30R cabinet uses a four step finish of stain, sealer, sanding, and a catalyzed top coat, creating the Warmwood color and protective surface on visible areas.
The Kitchen Kompact Warmwood WW30R wall cabinet brings a 30 inch wide, 21 inch high, 12 inch deep format together with maple flat panel doors and a recessed panel design, letting installers extend the Warmwood look through upper runs. Mortised and tenoned 3/4 inch solid maple door frames, solid wood corner blocks, and solid wood hanging strips contribute to a rigid structure that supports wall mounting and daily kitchen use. The three-ply flat panel plywood insert with rotary cut hard maple veneer face, combined with the four step stain, sealer, sanding, and catalyzed top coat process, delivers the Warmwood appearance across doors and visible faces. Concealed, self-closing hinges and adjustable shelves finish the interior and door function so the WW30R can be specified confidently where a Warmwood recessed panel wall cabinet is required.
Sold In: 1 Each