
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Kitchen Kompact Warmwood base corner cabinet 42 inch width by 34-1/2 inch height by 24 inch depth creates a corner base unit that matches standard kitchen base dimensions, which helps keep countertops level and provides a consistent working height across the run. Door frames built from solid 3/4 inch maple with mortised and tenoned construction form a strong joint at each corner, which supports long-term door alignment in daily use. Solid wood corner blocks that are glued and power nailed tie cabinet sides together, which helps the box resist racking when the cabinet is loaded. A flat panel plywood insert built as a three-ply panel with a rotary cut hard maple veneer face gives the door a consistent Warmwood appearance while maintaining panel stability. Solid wood hanging strips located on the top and bottom strengthen the rear of the cabinet, which supports mounting to wall framing where needed in the layout.
Adjustable shelves in this Warmwood base corner allow the installer to set shelf height to suit cookware or pantry storage, which helps make corner space more accessible after installation. Concealed, self-closing hinges on the doors keep hinge hardware out of sight when doors are closed, and the self-closing action pulls doors shut, which supports clean lines on the cabinet face. Plywood drawers are standard, giving a wood-based drawer box that matches the cabinet interior, which supports a unified appearance. The front to back epoxy-coated drawer system is securely attached to a solid wood strip in the back of the cabinet, which stabilizes drawer movement and supports smooth travel under normal kitchen loads. Solid wood toe kicks at 3/4 inch thick form a sturdy base at floor level, which helps support the cabinet structure and provides a solid surface at the toe area along the run.
The 42 inch width, 34-1/2 inch height, and 24 inch depth of this Warmwood base corner cabinet position it as a standard base unit for kitchen layouts that turn a corner, which helps maintain a continuous countertop line through the corner. Maple flat panel doors with a rotary cut hard maple veneer face on the center panel align the look with other Warmwood cabinets in the Kitchen Kompact family, which supports visual continuity across the kitchen. Solid wood toe kicks at 3/4 inch thick run along the bottom front of the unit, which let the cabinet integrate with adjacent base cabinets that share the same toe space. Solid wood hanging strips at the top and bottom rear give defined fastening areas, which helps the cabinet tie into wall framing or adjacent units so the corner stays stable. The Warmwood finish formed by stain, sealer, sanding, and catalyzed top coat lets installers coordinate this corner piece with matching Warmwood components in a planned layout.
Mortised and tenoned solid 3/4 inch maple door frames resist joint separation, which helps doors keep alignment with concealed, self-closing hinges over time. The three-ply flat panel plywood insert with rotary cut hard maple veneer face stays dimensionally stable in typical indoor conditions, which supports consistent door reveal lines when the kitchen experiences normal humidity changes. Solid wood corner blocks that are glued and power nailed tie cabinet sides and front together, which helps the cabinet hold square when clamped between adjoining units or under countertop weight. Solid wood hanging strips on the top and bottom back edge spread mounting loads across a wood member, which reduces stress on the cabinet back when fastened along a wall. The epoxy-coated front to back drawer system, securely attached to a solid wood strip in the back, supports drawer motion by spreading load into the cabinet structure. Plywood drawers pair with this system, which gives the drawer box consistent support along its travel path for everyday storage use.
The Kitchen Kompact Warmwood base corner cabinet measures 42 inches wide, 34-1/2 inches high, and 24 inches deep, which aligns with standard base cabinet dimensions for typical kitchen counter heights.
The door frames use solid 3/4 inch maple with mortised and tenoned construction around a flat plywood panel, which gives the doors stable joints and a consistent maple flat panel face.
The Warmwood base corner cabinet uses concealed, self-closing hinges, which keep hardware hidden when the doors are shut and pull the doors closed for a clean front appearance.
The cabinet uses plywood drawers with a front to back epoxy-coated drawer system securely attached to a solid wood strip at the back, which stabilizes drawer movement under typical kitchen loads.
Solid wood corner blocks that are glued and power nailed, combined with solid wood hanging strips at the top and bottom, help the cabinet resist racking and stay square in a kitchen run.
The Warmwood cabinet finish uses a four step process of stain, sealer, sanding, and a catalyzed top coat, which produces a uniform coated surface suitable for regular kitchen use.
The Kitchen Kompact Warmwood base corner cabinet WW42BC combines 42 inch width, 34-1/2 inch height, and 24 inch depth with mortised and tenoned solid maple doors, adjustable shelves, plywood drawers, and a catalyzed top coat finish, which together support a coordinated, functional corner in Warmwood kitchen layouts.
Sold In: 1 Each