Kitchen Kompact base corner cabinet defines this 42 inch wide DWhite recessed panel unit as a core base corner solution in the Kitchen Kompact line. The cabinet belongs to the Kitchen Kompact category, so it matches that product class for coordinated kitchen layouts. The manufacturer part number DW42BC and SAP description DWHITE 42BC identify it as the DWhite 42 inch base corner, which helps align it with other DWhite cabinets in a run. All face frames use 3/4 inch kiln-dried rails joined by mortise and tenon with glue, so the frame is built as a single rigid component that holds alignment during normal kitchen use. End panels are wood veneered, 1/2 inch thick engineered wood core plywood fastened to the front frame with tongue-in-groove construction, tying the sides directly into the face frame so the box works as one structural unit. All wall and base cabinets have 1/8 inch backs, giving a consistent back thickness across the line.
All wall and base cabinets in this line use 1/8 inch backs, so the rear panel thickness is consistent when lining up multiple Kitchen Kompact cabinets along a wall. Wall cabinets are equipped with solid wood hanging rails at the back, both top and bottom, tying into the cabinet structure so load transfers through solid wood when wall units are fastened in place. For the base corner, the 3/4 inch kiln-dried mortise-and-tenon face frame gives a stable front reference for aligning adjacent cabinets, helping keep face frames in plane across a run. End panels made from wood veneered, 1/2 inch engineered wood core plywood attach to this frame with tongue-in-groove construction, so the case sides register positively to the frame and help hold alignment once the cabinet is positioned.
The Kitchen Kompact 42 inch wide x 34-1/2 inch high x 24 inch deep DWhite base corner cabinet is sized for use as a corner unit in a Kitchen Kompact DWhite base layout. Its recessed panel styling ties into the Kitchen Kompact DWhite look, so the face appearance matches other DWhite components in the same kitchen. As a base corner in the Kitchen Kompact cabinet category, it anchors a corner while aligning in height at 34-1/2 inches with standard Kitchen Kompact base units. The depth of 24 inches allows it to sit with typical base cabinet depth, so countertops can bridge across the corner using that same depth reference. Because it is identified by part number DW42BC within the Kitchen Kompact product class, it can be specified alongside matching wall and base units from the same line for a coordinated layout.
The 3/4 inch kiln-dried face frame rails joined by mortise and tenon with glue create a single, continuous front structure, so hinge and door mounting points rest on a solid frame that resists twist during everyday kitchen use. Glenwood and Warmwood series frames use a mixture of solid beech and sycamore, giving those lines a hardwood frame build that supports hardware attachment over time. The Chadwood series uses solid oak for its frames, allowing that series to match other oak elements and maintain a uniform hardwood structure at the front of the cabinet. End panels from wood veneered, 1/2 inch engineered wood core plywood connect to the face frame using tongue-in-groove construction, which creates a positive mechanical joint tying sides to the front so the cabinet acts as a single unit once set in place. Tops and bottoms formed from 3/16 inch hardboard are dadoed into the sides and interlocked into the hanging rails of all wall units, then secured with adhesive, so those wall cabinets gain strength from the interlocking joints rather than relying only on fasteners at the edges. Wall cabinets with solid wood hanging rails at both top and bottom of the back offer a solid wood interface to structure, which is useful when tying multiple wall cabinets together in a straight run aligned to studs.
The Kitchen Kompact DW42BC base corner cabinet measures 42 inches wide, 34-1/2 inches high, and 24 inches deep, so it matches typical base cabinet depth and height while providing a 42 inch corner footprint.
The cabinet uses 3/4 inch kiln-dried face frame rails joined by mortise and tenon with glue, creating a rigid front frame that holds alignment where doors and hardware mount.
Kitchen Kompact Glenwood and Warmwood face frames use a mixture of solid beech and sycamore, while Chadwood face frames use solid oak, giving each series a defined hardwood frame composition.
End panels are wood veneered, 1/2 inch thick engineered wood core plywood fastened to the front frame with tongue-in-groove construction, so the sides lock mechanically into the face frame.
All wall and base cabinets in this Kitchen Kompact line use 1/8 inch backs, providing a consistent rear panel thickness across units installed in the same run.
Wall cabinet tops and bottoms are 3/16 inch hardboard dadoed into sides, interlocked into solid wood hanging rails, and secured with adhesive, forming an integrated shell around the frame.
The Kitchen Kompact DW42BC DWhite 42 inch base corner cabinet offers a recessed panel design within the Kitchen Kompact product class, with a 3/4 inch kiln-dried mortise-and-tenon face frame and wood veneered, 1/2 inch engineered wood core end panels tied in by tongue-in-groove construction. All wall and base cabinets in this line use 1/8 inch backs, while the wall units add solid wood hanging rails and tops and bottoms of 3/16 inch hardboard dadoed into sides and interlocked into those rails with adhesive. For projects built around the Kitchen Kompact DWhite series, this base corner cabinet provides the defined DW42BC part number and dimensions needed to plan a matching corner position in the run.
Sold In: 1 Each