Kitchen Kompact Warmwood wall cabinet is a 36 inch wide, 18 inch high, 12 inch deep wall unit built for standard kitchen runs where overhead storage and consistent sizing matter. The cabinet uses maple flat panel doors with a recessed panel profile, so fronts present a clean, framed look that lines up well with other Warmwood units. Door frames use mortised and tenoned construction in solid 3/4 inch maple, creating a solid joint at each corner that helps doors stay aligned during regular open-and-close cycles. Solid wood corner blocks are glued and power nailed, tying the cabinet box together at key stress points so the structure resists racking once it is fastened on the wall. A flat panel plywood insert with a three-ply core and rotary cut hard maple veneer face creates a stable center panel that holds finish consistently across the door field.
Solid wood hanging strips located on the top and bottom of the cabinet back provide continuous mounting rails, so installers can fasten through substantial wood instead of thin back material during wall layout. Adjustable shelves allow interior spacing to shift up or down, which helps configure storage around taller glasses or stacked plates without cutting shelves. Maple flat panel doors are hung on concealed, self-closing hinges, so hinge arms remain hidden when doors are shut while the self-closing function pulls doors to the face frame for a consistent reveal. The cabinet depth of 12 inches keeps the unit in a standard wall line, which supports alignment over typical 24 inch deep base cabinets in a kitchen run.
The Kitchen Kompact 36 inch wide, 18 inch high, 12 inch deep Warmwood wall cabinet fits upper layouts that call for a shorter height cabinet over areas such as sinks, ranges, or workspaces where clearance matters. Its solid wood hanging strips at the top and bottom of the back give installers defined rails for fasteners, so the cabinet can be tied into wall studs along its width to build a straight upper run. Maple flat panel doors with a recessed panel profile coordinate with other Kitchen Kompact Warmwood pieces, helping maintain a consistent front style across multiple cabinets. The three-ply flat panel plywood insert with hard maple veneer face keeps the recessed panel center stable, which supports a uniform appearance when several WW36Y units are set side by side.
Mortised and tenoned solid 3/4 inch maple door frames create tight joints at each corner, which helps doors stay square on their concealed hinges so reveals stay even after repeated use. Solid wood corner blocks that are glued and power nailed add stiffness at high-stress cabinet corners, so once the cabinet is secured through the hanging strips, the box resists sagging that could open gaps between units. Concealed, self-closing hinges on the maple flat panel doors pull each door closed against the face opening, supporting consistent alignment without visible hinge hardware. The 4 step process of stain, sealer, sanding and catalyzed top coat creates a layered Warmwood finish that bonds to the maple veneer face and maple frames, giving the cabinet exterior a hardened surface that stands up to everyday contact around the kitchen work zone.
The Kitchen Kompact Warmwood wall cabinet measures 36 inches wide, 18 inches high, and 12 inches deep, so it aligns with common upper cabinet dimensions in standard kitchen layouts.
The cabinet doors use mortised and tenoned construction of solid 3/4 inch maple with a flat panel plywood insert, giving the door a solid frame and a stable recessed maple-veneered center panel.
The Kitchen Kompact Warmwood wall cabinet uses concealed, self-closing hinges, so the hinge hardware stays hidden while pulling the doors shut for a clean, consistent front.
The wall cabinet uses solid wood hanging strips located on the top and bottom, providing sturdy fastening points for securing the cabinet to wall framing along its width.
The Warmwood cabinet finish uses a 4 step process of stain, sealer, sanding and catalyzed top coat, creating a consistent color and a hardened surface on maple components.
The WW36Y wall cabinet has adjustable shelves, allowing shelf height changes so stored items of different sizes can fit without altering the cabinet box.
The Kitchen Kompact Warmwood wall cabinet in size 36 inches wide by 18 inches high by 12 inches deep brings mortised and tenoned maple doors, solid wood hanging strips, adjustable shelves, and a 4 step catalyzed finish into one unit. For projects built around Kitchen Kompact Warmwood style, this WW36Y cabinet lets you match front design, construction method, and finish while keeping upper dimensions consistent across the kitchen. Use this cabinet wherever that 36 by 18 by 12 wall footprint lines up with your layout, and tie it into the run for a unified Warmwood installation.
Sold In: 1 Each