Warmwood vanity sink base from Kitchen Kompact provides a 36 inch wide, 30-1/2 inch high, and 21 inch deep cabinet sized for a typical vanity sink layout, so it helps set a consistent footprint for bathroom runs and countertop fabrication. The door frames use mortised and tenoned construction of solid 3/4 inch maple, creating a stable front that holds alignment under daily door use. A flat panel plywood insert with a three-ply panel and rotary cut hard maple veneer face gives the recessed panel look while maintaining dimensional stability across seasons. Solid wood corner blocks are glued and power nailed, tying the cabinet box together to help it resist racking when moved or when plumbing is connected. Solid wood hanging strips located on the top and bottom provide defined mounting areas for fastening to wall framing during installation and leveling.
The Kitchen Kompact vanity cabinet measures 36 inches wide, 30-1/2 inches high, and 21 inches deep, giving clear reference dimensions when laying out plumbing rough-ins and countertop lengths. Solid wood hanging strips located on the top and bottom provide continuous attachment points so fasteners can be driven into wall framing along the full cabinet width. Solid wood corner blocks that are glued and power nailed help the box remain square while the cabinet is shimmed and leveled against finished flooring. Mortised and tenoned solid 3/4 inch maple door frames give a rigid front frame that holds hinge locations accurately, supporting consistent reveals after doors are aligned. Adjustable shelves inside the cabinet can be set to different heights, allowing space for traps and shutoffs while still creating usable storage zones.
This WWV36S Warmwood vanity sink base from Kitchen Kompact is designed as a 36 inch wide, 30-1/2 inch high, 21 inch deep cabinet, so it suits bathroom vanity layouts that call for a standard-width sink base. The recessed panel look is created with a flat panel plywood insert that is a three-ply panel with a rotary cut hard maple veneer face, so it visually pairs with other maple-faced components in the same Warmwood finish. Door frames built of solid 3/4 inch maple using mortised and tenoned construction give the cabinet a solid face frame that aligns with adjacent units in a run. Solid wood corner blocks that are glued and power nailed and solid wood hanging strips located on the top and bottom support use as part of a multi-cabinet installation where cabinets are ganged and fastened to the wall.
The Warmwood vanity sink base uses solid wood hanging strips at the top and bottom, giving straight, continuous surfaces for fastening into studs along the cabinet span, which helps achieve a tight fit to the wall. Mortised and tenoned construction in the solid 3/4 inch maple door frames keeps hinge points stable, supporting precise adjustment of concealed, self-closing hinges for consistent gaps and soft closure at the sink base. Solid wood corner blocks that are glued and power nailed add rigidity, which helps the cabinet stay square while shims are placed and while countertops are set. The flat panel plywood insert with rotary cut hard maple veneer face keeps the recessed panel door surface stable, which supports a uniform door plane across multiple cabinets. The four step process of stain, sealer, sanding, and catalyzed top coat applied to the Warmwood finish provides a sealed surface that holds up under normal bathroom moisture and cleaning routines.
The WWV36S cabinet is 36 inches wide, 30-1/2 inches high, and 21 inches deep, which helps with planning rough plumbing locations and countertop sizing.
The door frames are mortised and tenoned solid 3/4 inch maple, providing a rigid structure that supports hinge mounting and keeps doors aligned in daily use.
The recessed panel uses a flat panel plywood insert that is a three-ply panel with a rotary cut hard maple veneer face, giving a stable, matching Warmwood appearance.
Solid wood hanging strips located on the top and bottom provide continuous fastening areas, allowing secure attachment of the cabinet to wall framing.
This Kitchen Kompact vanity uses concealed, self-closing hinges, which keep hardware hidden and control door closing for a cleaner front appearance.
The Warmwood finish uses a four step process of stain, sealer, sanding, and a catalyzed top coat, creating a sealed surface suitable for regular bathroom use.
The Warmwood vanity sink base from Kitchen Kompact combines a 36 inch wide, 30-1/2 inch high, 21 inch deep footprint with mortised and tenoned solid 3/4 inch maple door frames, giving a sturdy front for bathroom work. Solid wood corner blocks that are glued and power nailed, solid wood hanging strips located on the top and bottom, and a flat panel plywood insert with a rotary cut hard maple veneer face all contribute to a cabinet that installs cleanly and aligns with surrounding units. Choosing this WWV36S Warmwood vanity sink base supports consistent layout, stable hinge mounting, and a finished look that matches other Warmwood pieces in the project.
Sold In: 1 Each