Kitchen Kompact Warmwood wall cabinet gives you a 36 inch wide, 12 inch high, 12 inch deep upper cabinet that fits shallow wall runs where full-height storage is not needed, so layouts can align with soffits or clear appliances while staying consistent.
The door frames use mortised and tenoned construction of solid 3/4 inch maple, which locks each corner mechanically, so doors stay square under normal use and keep reveals looking straight along a run of cabinets.
Solid wood corner blocks are glued and power nailed, tying the cabinet box together at key stress points, which helps the case resist racking when it is fastened to wall studs or when loads are placed on the shelves.
A maple flat panel door with a flat panel plywood insert creates a recessed panel look, so the face of the cabinet matches other Warmwood recessed panel units and keeps a uniform style across the kitchen.
The flat panel plywood insert is a three-ply panel with a rotary cut hard maple veneer face, so the visible surface presents a maple grain that matches the solid maple parts, helping doors read as one material from normal viewing distance.
Solid wood hanging strips located on the top and bottom give solid fixing points, so installers can drive fasteners through substantial wood at both rails for secure mounting and easier alignment on uneven framing.
A four step process of stain, sealer, sanding and catalyzed top coat is applied, building a finished surface that protects the Warmwood appearance in typical kitchen conditions and keeps the cabinet color consistent with other pieces in the line.
Adjustable shelves are provided, so shelf height can be positioned to suit stored items in this 12 inch deep cabinet, allowing better use of the shallow depth for dishes, pantry goods, or glassware.
Concealed, self-closing hinges are used, so doors close to a consistent position without visible hinge arms, which keeps the Warmwood face clean while helping doors return reliably against the face frame after use.
Solid wood hanging strips on the top and bottom of the cabinet back establish clear fastening zones, so fasteners bite into substantial wood across the height of the cabinet when tying into wall structure.
Solid wood corner blocks that are glued and power nailed strengthen the joints where cabinet sides meet the top and bottom, so the box resists spreading or twisting as it is lifted onto the wall and pulled tight.
The 12 inch depth keeps the cabinet shallower than many base units, so installers can set a consistent overhang above counters and align this wall cabinet with neighboring units without projecting too far into the room.
Adjustable shelves inside the cabinet allow shelf pins to be set at different heights, so the installer or user can tailor interior spacing after the cabinet is mounted without structural changes.
Concealed, self-closing hinges mount the doors so that hardware is hidden when the doors are closed, which keeps the face looking clean and also helps doors return to a repeatable position after being opened.
The maple flat panel door with recessed styling provides a flush face with defined edges, so aligning reveals between this cabinet and adjacent Warmwood units is straightforward during install.
The 36 inch wide, 12 inch high, 12 inch deep size suits upper runs where a low profile cabinet is needed, so it works in spaces above work areas, appliances, or walkways that benefit from extra headroom.
Its Warmwood finish with maple flat panel doors positions this cabinet for kitchens or similar spaces using Kitchen Kompact Warmwood recessed panel styling, so wall units and base units share a continuous appearance.
The three-ply plywood insert with hard maple veneer face keeps door centers relatively light compared to solid slabs, so large 36 inch spans remain manageable when users open both doors frequently.
Solid 3/4 inch maple door frames with mortised and tenoned joints handle normal hinge forces along that 36 inch width, so the doors stay seated to the frame and maintain clean gaps at the stiles.
Solid wood hanging strips help this cabinet tie into wall framing across its entire width, so it can be integrated into multi-cabinet runs where shared studs carry the load of several wall units together.
The 12 inch depth works for typical dinnerware, glassware, and dry goods, so contents stay easy to reach without extending far past the user, which suits upper installation over counters.
Mortised and tenoned solid maple door frames give each door a defined, square geometry, so when hinges are mounted, the door edges line up predictably with the cabinet face for uniform reveals across several units.
The three-ply plywood insert with rotary cut hard maple veneer face provides a stable panel core, so seasonal movement is moderated and panel edges stay settled within the frame, helping finishes remain smooth at the joint lines.
Solid wood corner blocks that are glued and power nailed stiffen the box, so when installers clamp or pull cabinets together in a line, the case holds shape instead of flexing at the joints.
Solid wood hanging strips on top and bottom define consistent mounting reference points, so installers can transfer measurements between cabinets and achieve level, co-planar faces along entire walls.
The four step finish system of stain, sealer, sanding and catalyzed top coat produces an even Warmwood tone, so multiple cabinets of the same line present a consistent color when installed side by side.
Concealed, self-closing hinges bring doors to a reliable resting position, so after adjustments the doors continue to return to the same spot, helping maintain alignment with adjacent fronts during everyday use.
Adjustable shelves give flexibility inside the rigid case, so storage can be rearranged for different contents without affecting door alignment or the structural performance of the cabinet.
The 12 inch cabinet depth paired with the 36 inch width keeps weight and reach reasonable, so end users can access contents easily while the structure, supported by the reinforced box and hanging strips, handles typical wall-mounted loads.
The Kitchen Kompact Warmwood wall cabinet measures 36 inches wide, 12 inches high, and 12 inches deep, so it serves as a shallow upper cabinet suited to runs above counters or work areas.
The door frames use mortised and tenoned solid 3/4 inch maple, so each door forms a strong, square frame that handles hinge forces and regular opening without relying on weak joints.
The flat panel insert is a three-ply plywood with a rotary cut hard maple veneer face, so the visible surface shows maple grain while the core supports stability against normal humidity changes.
The cabinet uses concealed, self-closing hinges, so the hinges are hidden when the doors are shut and the doors return consistently to a closed position after opening.
The cabinet has solid wood corner blocks that are glued and power nailed and solid wood hanging strips at the top and bottom, so the box remains rigid and offers strong fastening areas for mounting.
A four step process of stain, sealer, sanding and catalyzed top coat is applied, so the maple surfaces receive a consistent Warmwood color and a protective top film suited to typical kitchen use.
The Kitchen Kompact Warmwood 36 inch by 12 inch wall cabinet delivers a shallow-depth upper built around solid 3/4 inch maple frames, solid wood corner blocks, and solid wood hanging strips, so it supports secure wall mounting in standard kitchen layouts.
The maple flat panel door with three-ply plywood insert and rotary cut hard maple veneer face ties the look to other Warmwood recessed panel units, so you can extend a consistent door style across wall and base cabinets.
With concealed self-closing hinges, adjustable shelves, and a four step Warmwood finishing process, this cabinet aligns appearance, storage flexibility, and practical mounting structure, so it fits naturally into professional and serious DIY kitchen projects.
Sold In: 1 Each