Kitchen Kompact Glenwood 36WC defines this 36 inch wide, 30 inch high, 12 inch deep wall corner cabinet as a recessed panel unit ready for upper corner runs. The solid frame construction sets it up as a sturdy anchor cabinet in a wall layout. The brand identity as Kitchen Kompact ties it directly to the Glenwood series, so the GW36WC model aligns with projects that call for that specific look and line. The solid 3/4 inch oak, maple, or beech frame gives the cabinet a robust face structure, which supports door alignment over time under normal kitchen use. Each rail is kiln dried, which stabilizes the wood in the frame, reducing movement that could affect door gaps and reveals. Mortise and tenon joints, glued for added strength, keep the frame corners tight, so the cabinet face stays square when fastened into a run. Solid wood corner blocks that are glued and power nailed reinforce structural points, helping the cabinet handle typical wall mounting stresses.
This 36 inch wide, 30 inch high, 12 inch deep Glenwood wall corner cabinet is built as an upper unit, so those dimensions guide layout above counters and appliances. The solid wood hanging strips on wall cabinets, located at the top and bottom, define reliable fastening bands, which supports consistent stud attachment along the cabinet width. Because the frame is solid 3/4 inch oak, maple, or beech, the face of the cabinet offers a strong reference surface for aligning doors and adjoining cabinet faces in a straight run. Mortise and tenon joints, glued in each kiln dried rail, keep frame corners tight, which helps side-to-side reveals remain even when the cabinet is pulled into plane. The 3 ply end panels, with a 1/2 inch engineered wood core and hardwood veneers, give the sides a rigid yet workable surface, so scribing or trimming at walls can be managed while maintaining overall panel integrity.
The Kitchen Kompact 36 inch wide Glenwood wall corner cabinet targets upper corner positions in kitchen layouts that follow the Kitchen Kompact Glenwood series. The 30 inch height lines up with common wall cabinet runs, so it integrates into standard upper rows above counters. The 12 inch depth suits typical wall cabinet depths, positioning the front frame where it meets other standard depth wall units. Because the frame is built from solid 3/4 inch oak, maple, or beech, the GW36WC serves well as a structural transition point where two wall runs meet at a corner. Solid wood hanging strips at the top and bottom of the wall cabinet back allow the unit to tie firmly into studs across its height, which is important at the corner where loads from adjacent cabinets converge. The 3 ply end panels with a 1/2 inch engineered wood core and hardwood veneers present finished surfaces at exposed ends, so the corner can function as a visible end or a buried junction within a longer run.
The solid 3/4 inch frame of oak, maple, or beech on the Glenwood GW36WC creates a consistent, rigid front reference, which supports accurate alignment when setting doors and joining neighboring cabinets. Kiln dried rails, joined with mortise and tenon and then glued, resist seasonal movement more effectively than simple butt joints, so hinge alignment and reveal settings remain more stable after installation. Solid wood corner blocks that are glued and power nailed strengthen internal joints, which helps the cabinet hold square as clamps or screws draw it to surrounding units. Solid wood hanging strips at both top and bottom of this wall cabinet offer two strong fastening lines, helping distribute load evenly across the back into the wall structure. The 3 ply end panel design, with a 1/2 inch engineered wood core and hardwood veneers, balances rigidity and workability, which supports accurate scribing to uneven walls while maintaining a sound surface for finishing within the Glenwood look.
The Kitchen Kompact Glenwood GW36WC wall corner cabinet measures 36 inches wide, 30 inches high, and 12 inches deep, which positions it for typical upper corner cabinet runs.
The Glenwood 36WC frame is built of solid 3/4 inch oak, maple, or beech with kiln dried rails joined by mortise and tenon and glued, supporting a strong and stable cabinet front.
The solid wood hanging strips on wall cabinets, located at the top and bottom, provide defined fastening zones, helping spread loads into wall studs along the cabinet height.
The end panels use 3 ply construction with a 1/2 inch engineered wood core and hardwood veneers, giving the sides strength and a finished surface for exposed or scribed ends.
The solid wood corner blocks are glued and power nailed, reinforcing key joints so the cabinet holds square under typical wall mounting and when tied to adjacent units.
Solid wood toe kicks, 3/4 inch thick, coordinate with matching Kitchen Kompact base cabinets, helping align the Glenwood wall corner cabinet visually within a full kitchen run.
The Kitchen Kompact Glenwood 36WC wall corner cabinet combines a solid 3/4 inch oak, maple, or beech frame with kiln dried, mortise and tenon joined rails, making it a strong choice where two wall runs meet. Solid wood hanging strips at the top and bottom of the wall cabinet back support secure fastening into studs, which is critical at a corner joint. The 3 ply end panels with a 1/2 inch engineered wood core and hardwood veneers give the sides both rigidity and a finished appearance that works in visible locations. For projects built around the Kitchen Kompact Glenwood line, this 36 inch wide, 30 inch high, 12 inch deep recessed panel wall corner cabinet provides a matched, structurally sound unit ready for integration into upper cabinet layouts.
Sold In: 1 Each