Kitchen Kompact Glenwood vanity sink base is a 48 inch wide, 34-1/2 inch high, and 21 inch deep vanity sink base cabinet that provides a sized foundation for bathroom or utility vanity layouts. The cabinet uses frames built of solid 3/4 inch oak, maple, or beech, which creates a rigid front structure that holds hinges, doors, and drawer fronts in alignment over time. Each rail in the frame is kiln-dried, joined by mortise and tenon, and then glued, so each joint resists movement that can otherwise lead to racking during transport or daily use. Solid wood corner blocks are glued and power nailed, giving extra bracing at stress points such as corners where tops are fastened. Solid wood toe kicks at 3/4 inch thickness carry front-edge contact with the floor, which supports the cabinet face where feet and cleaning tools commonly meet the base. Solid wood hanging strips on wall and base cabinets are located at the top and bottom, providing defined attachment zones when this vanity base is integrated into a run of cabinets.
This Glenwood 48 inch vanity sink base uses a face frame of solid 3/4 inch oak, maple, or beech, so the front opening for sink and storage is defined by a sturdy frame that stays square during setting and leveling. Each frame rail is kiln-dried and joined by mortise and tenon, then glued, so front joints resist seasonal movement that could affect door swing or reveal. Solid wood corner blocks that are glued and power nailed tie the frame and sides together, giving stronger corners for attaching a countertop or supporting a sink cutout. The 3/4 inch solid wood toe kick forms a firm contact line with the floor, helping the cabinet bridge small variations in flooring during layout. End panels built with 3-ply construction and a 1/2 inch engineered wood core with hardwood veneers provide a stable side structure with hardwood surfaces suitable for exposed ends.
The Kitchen Kompact 48 inch wide, 34-1/2 inch high, and 21 inch deep Glenwood vanity sink base fits layouts that call for a standard-height vanity footprint with generous sink and storage width. Frames built of solid 3/4 inch oak, maple, or beech supply a strong front for mounting doors and hardware in bathrooms or similar spaces, where frequent opening and closing can stress lighter construction. Each kiln-dried rail joined by mortise and tenon and glued supports long-term squareness, which matters when aligning this cabinet with adjacent units in a run. Solid wood corner blocks that are glued and power nailed help this vanity base carry the weight and motion around sink installations, backing up the corners where tops and deck materials rest. End panels built with 3-ply construction and a 1/2 inch engineered wood core with hardwood veneers give the sides a finished presence, making the cabinet suitable wherever one or both ends remain visible in the room.
The solid 3/4 inch oak, maple, or beech frame on the Kitchen Kompact GWV48ST cabinet offers a stable reference edge for shimming and scribing to walls, which helps installers hold straight sight lines along a vanity run. Mortise and tenon joints that are kiln-dried and glued keep the rails tight to the stiles, so hinge locations and door clearances remain predictable after transport and handling. Solid wood corner blocks that are glued and power nailed tie the front frame to the body, giving confident support at corners where tops are fastened or where sink loads concentrate. The 3/4 inch solid wood toe kick provides a dependable front base line when leveling across uneven floors, which simplifies bringing the cabinet into plane with adjacent units. Solid wood hanging strips on wall and base cabinets at both top and bottom define robust fastening zones, supporting consistent anchoring patterns along studs or backing. The 3-ply end panels with a 1/2 inch engineered wood core and hardwood veneers add dimensional stability to the sides, so alignment along the length of the vanity stays more uniform in typical indoor conditions.
The Kitchen Kompact Glenwood vanity sink base is 48 inches wide, 34-1/2 inches high, and 21 inches deep, which suits many standard vanity layouts that use a full-width sink or combination of sink and storage.
The frame on this Glenwood vanity sink base is built of solid 3/4 inch oak, maple, or beech, giving a sturdy structure for mounting doors and hardware where daily use demands a strong face frame.
The Kitchen Kompact GWV48ST cabinet uses kiln-dried rails joined by mortise and tenon and then glued, creating tight joints that help the cabinet resist racking during installation and everyday use.
The vanity cabinet end panels use 3-ply construction with a 1/2 inch engineered wood core and hardwood veneers, providing stable sides with hardwood surfaces suitable for exposed ends in a room.
The solid wood corner blocks are glued and power nailed, reinforcing cabinet corners so they better support countertops and sink loads at attachment points during and after installation.
The 3/4 inch solid wood toe kick forms a strong front base edge, helping the cabinet sit firmly on the floor and tolerate contact from feet and cleaning tools along the bottom.
The Kitchen Kompact Glenwood 48 inch vanity sink base pairs defined dimensions with construction details aimed at stable framing, including solid 3/4 inch oak, maple, or beech frames, mortise and tenon joints, solid wood corner blocks, and 3-ply end panels with hardwood veneers. These elements give you a cabinet body designed to hold alignment as it is leveled, fastened, and put into daily bathroom or utility service. For projects that call for a 48 inch wide, 34-1/2 inch high, and 21 inch deep vanity sink base, this GWV48ST cabinet offers a ready-built structure to anchor countertops, sinks, and adjoining cabinets.
Sold In: 1 Each