Kitchen Kompact Chadwood wall cabinet delivers a 36 inch wide, 21 inch high, 12 inch deep storage unit that mounts on the wall, giving an installer a defined footprint for planning upper cabinet runs and aligning with adjacent units. The CW36R recessed panel style uses a flat panel plywood insert, so the face presents a clean, framed look suited to kitchens that call for a simple panel profile. Door frames are mortised and tenoned construction of solid 3/4 inch oak, creating a solid frame joint that supports the door through repeated openings on a busy job site. Solid wood corner blocks are glued and power nailed, tying cabinet corners together in a way that helps the box stay square when hung in a straight line. Solid wood hanging strips located on the top and bottom provide continuous mounting contact, so the cabinet back is supported along its length during wall installation.
This Kitchen Kompact wall cabinet uses solid wood hanging strips located on the top and bottom, creating two firm mounting zones that accept fasteners along the strip length during hanging. The 36 inch width, 21 inch height, and 12 inch depth define the outer dimensions, letting installers line this unit up with neighboring cabinets and corner conditions. Solid wood corner blocks that are glued and power nailed keep the cabinet box rigid while it is held against the wall and fastened through the hanging strips. The cabinet height and depth create a standard wall profile, so the face of the cabinet presents correctly above base cabinets in a typical kitchen layout.
The CW36R Chadwood wall cabinet measures 36 inches wide, so it fits well as a primary upper unit over a base cabinet of matching width or centered over a work area. At 21 inches high and 12 inches deep, the cabinet provides wall storage without projecting excessively into the room, supporting clear access to counters below. The recessed panel door design with a flat panel plywood insert and rotary cut red oak veneer face aligns with other Chadwood pieces, helping maintain a consistent oak appearance across a full kitchen. This wall cabinet belongs to the Kitchen Kompact product class, so it is suited to projects that call for this specific line of framed oak cabinets.
Mortised and tenoned construction of solid 3/4 inch oak door frames gives the CW36R doors a stable frame that helps keep the recessed panel seated and the rails and stiles in plane, aiding smooth hinge action over time. Solid wood corner blocks that are glued and power nailed tie the cabinet sides and face together, which helps the case remain square when it is pulled tight to wall studs. Solid wood hanging strips on the top and bottom provide straight, solid edges for mounting, so installers can place fasteners where structure is available while keeping the cabinet aligned. The four step process of stain, sealer, sanding and catalyzed top coat creates a finished surface across the oak and veneer faces, supporting a consistent appearance from cabinet to cabinet on the job.
The CW36R Chadwood wall cabinet is 36 inches wide, 21 inches high, and 12 inches deep, which sets the footprint for planning wall cabinet layouts above base units.
The Chadwood cabinet doors use mortised and tenoned solid 3/4 inch oak frames with a flat panel plywood insert, providing a framed oak look around a recessed panel center.
The cabinet door panel is a three-ply flat panel plywood insert with a rotary cut red oak veneer face, giving the recessed panel an oak grain surface.
The CW36R cabinet box uses solid wood corner blocks that are glued and power nailed, which helps keep the case rigid when mounted on a wall.
This Kitchen Kompact wall cabinet has solid wood hanging strips located on the top and bottom, creating strong mounting areas for fastening to wall framing.
The Chadwood wall cabinet receives a four step process of stain, sealer, sanding and a catalyzed top coat, resulting in a finished surface on the oak and veneer faces.
The CW36R Kitchen Kompact Chadwood wall cabinet combines a 36 inch width, 21 inch height, and 12 inch depth with mortised and tenoned solid 3/4 inch oak door frames for a defined, framed upper unit. Solid wood hanging strips located on the top and bottom, along with glued and power nailed solid wood corner blocks, support a rigid box ready for wall mounting in a kitchen layout. Adjustable shelves and concealed, self-closing hinges contribute to everyday function once the cabinet is in place. For projects using Kitchen Kompact Chadwood components, this wall cabinet serves as a core upper element that aligns visually and dimensionally with the line.
Sold In: 1 Each