Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Kitchen Kompact Chadwood base corner cabinet is a 42 inch wide, 34-1/2 inch high, 24 inch deep base corner unit designed as part of the Kitchen Kompact Chadwood line. The cabinet uses door frames with mortised and tenoned construction in solid 3/4 inch oak, which creates a strong, stable joint that stands up well when doors are opened and closed repeatedly. Solid wood corner blocks are glued and power nailed, tying the frame together so the base holds square during installation and over years of service. A flat panel plywood insert uses a three-ply panel with a rotary cut red oak veneer face, providing an oak appearance while using a dimensionally stable panel in the door. Solid wood hanging strips are located on the top and bottom, giving solid fastening points when securing the cabinet to wall and adjacent units. Oak flat panel doors and solid wood toe kicks, 3/4 inch thick, complete the Chadwood recessed panel look at floor level.
This Kitchen Kompact 42 inch base corner cabinet uses adjustable shelves, which allow shelf positions to be set for contents after the cabinet is installed and leveled. Concealed, self-closing hinges are used on the oak flat panel doors, so hinge hardware stays out of sight while doors pull themselves closed at the end of travel. These concealed hinges support a clean face while simplifying door alignment within the face frame during setup. Drawers are plywood and are equipped with a front to back epoxy-coated drawer system that is securely attached to a solid wood strip in the back of the cabinet, helping the drawer track remain aligned with the cabinet box. A ball bearing operated nylon roller system is used on the drawers, which provides a smooth sliding action when opening and closing the drawer in daily use.
The Kitchen Kompact Chadwood 42 inch wide base corner cabinet is built as a base corner unit in the Kitchen Kompact Chadwood cabinet family, tying into layouts that use other Kitchen Kompact base cabinets. The 34-1/2 inch height and 24 inch depth give dimensions that match typical base cabinet runs, so this corner can transition from one wall to the next while keeping a continuous counter height. The recessed panel Chadwood design is formed with oak flat panel doors using a flat panel plywood insert with a rotary cut red oak veneer face, creating a consistent oak appearance across doors in the run. Solid wood toe kicks at 3/4 inch thick carry the Chadwood look down to floor level, supporting a uniform toe space line. Solid wood hanging strips on the top and bottom allow the cabinet to be integrated into a corner run using the same fastening approach used on other Kitchen Kompact cabinets.
The mortised and tenoned solid 3/4 inch oak door frame construction used on this Kitchen Kompact Chadwood base corner cabinet creates rigid door frames that help hold reveals consistent along the recessed panels once hinges are adjusted. Solid wood corner blocks that are glued and power nailed reinforce the cabinet box so it stays square as the corner is drawn into position against two walls, which reduces the tendency for twist while shimming. The three-ply flat panel with rotary cut red oak veneer face in the doors offers a stable center panel with an oak grain, supporting a uniform door face appearance across varying humidity. The 4 step process of stain, sealer, sanding and catalyzed top coat is applied to the cabinet surfaces, providing a finished surface that is ready for normal kitchen use without additional finishing steps on site. The front to back epoxy-coated drawer system, securely attached to a solid wood strip at the back, keeps drawer slides firmly anchored to the cabinet structure, which supports consistent drawer tracking. Ball bearing operated nylon rollers on the drawers support smooth drawer travel, so the plywood drawers move predictably when loaded. Adjustable shelves inside the cabinet allow shelf height to be set according to stored items, giving flexibility when organizing the corner base space.
The Kitchen Kompact Chadwood base corner cabinet is 42 inches wide, 34-1/2 inches high, and 24 inches deep, so it aligns with standard base cabinet height and depth in typical kitchen layouts.
The cabinet uses door frames made from solid 3/4 inch oak with mortised and tenoned construction, giving the doors a strong, stable frame for repeated opening and closing.
The Kitchen Kompact Chadwood base corner cabinet uses concealed, self-closing hinges on the oak flat panel doors, so hinges stay hidden while pulling doors closed at the end of travel.
The cabinet uses adjustable shelves, allowing shelf positions to be set to suit stored items after the cabinet has been installed in the kitchen corner.
The cabinet has plywood drawers using a front to back epoxy-coated drawer system attached to a solid wood strip in the back, with ball bearing operated nylon rollers for smooth movement.
The Kitchen Kompact Chadwood cabinet receives a 4 step process of stain, sealer, sanding, and catalyzed top coat, providing a completed finish suited to normal kitchen cabinet service.
The Kitchen Kompact Chadwood 42 inch wide, 34-1/2 inch high, 24 inch deep base corner cabinet combines mortised and tenoned solid 3/4 inch oak door frames, solid wood corner blocks, and solid wood hanging strips in a recessed panel design ready for Chadwood layouts. Adjustable shelves, concealed self-closing hinges, plywood drawers with a front to back epoxy-coated drawer system, and ball bearing operated nylon rollers provide a functional corner base cabinet. For Kitchen Kompact projects that call for an oak flat panel Chadwood corner, this CW42BC base corner cabinet provides a matched component for the run.
Sold In: 1 Each