Kitchen Kompact wall cabinet in the Warmwood finish provides a 33 inch wide, 15 inch high, 12 inch deep wall storage unit that fits standard upper cabinet layouts and keeps runs consistent across a kitchen line. The cabinet uses door frames with mortised and tenoned construction of solid 3/4 inch maple, creating a rigid door assembly that stays square during repeated opening in everyday use. A flat panel plywood insert forms the door center panel with a three-ply panel and rotary cut hard maple veneer face, so the recessed panel design presents a uniform maple grain that matches other Warmwood pieces. Solid wood corner blocks are glued and power nailed, tying cabinet sides together for structural support at the corners where wall loads transfer. Solid wood hanging strips located on the top and bottom give a substantial mounting surface for wall installation along the cabinet length.
This Warmwood 33 inch wide wall cabinet, identified as WW33X, uses solid wood hanging strips located on the top and bottom, which establish strong bands for fastening into wall framing during installation. Solid wood corner blocks that are glued and power nailed brace the cabinet corners, so the box resists twisting while being lifted into position on the wall. Door frames with mortised and tenoned construction of solid 3/4 inch maple hold hinge screws in solid material and keep the doors aligned once mounted. Concealed, self-closing hinges on the maple flat panel doors pull the doors shut against the face frame, which helps maintain clean reveals without constant manual adjustment. The overall 33 inch width, 15 inch height and 12 inch depth set this cabinet up for use in typical upper rows where shallow depth is required above counters.
The Kitchen Kompact WW33X cabinet has a 33 inch width, 15 inch height and 12 inch depth, so it lines up with standard wall cabinet runs across a kitchen, especially above counter spaces or appliances needing a shorter height. The maple flat panel doors with recessed panel plywood inserts present a Warmwood face that matches other Kitchen Kompact cabinets in the same line, helping installers build continuous banks with uniform door style. Solid wood hanging strips located on the top and bottom allow the cabinet to be fastened along both upper and lower edges, which helps when tying into varied stud layouts or ledger support during installation. Solid wood corner blocks that are glued and power nailed brace the case so it stays square when wall fasteners are tightened, reducing the need to correct racking after mounting into the framing.
Door frames built with mortised and tenoned construction of solid 3/4 inch maple give each door a solid perimeter that resists joint loosening, which helps doors stay aligned over time after hinge setting. Concealed, self-closing hinges on the maple flat panel doors draw the doors fully closed, which keeps reveals consistent and reduces callbacks for doors drifting open. The flat panel plywood insert, made as a three-ply panel with a rotary cut hard maple veneer face, keeps the center panel stable while showing a continuous maple surface that aligns with Warmwood finishing on adjacent units. A 4 step process of stain, sealer, sanding and catalyzed top coat is applied, so the finish builds in controlled layers that contribute to a smooth Warmwood appearance across door and face surfaces. Adjustable shelves inside the cabinet let installers or end users shift shelf positions to fit stored items without changing the exterior door alignment set during hanging. Solid wood hanging strips located on the top and bottom provide predictable fastening zones, supporting repeatable mounting practices from one job to the next.
The WW33X Warmwood wall cabinet measures 33 inches wide, 15 inches high and 12 inches deep, which suits typical upper cabinet layouts in kitchen runs.
The door frames are solid 3/4 inch maple with mortised and tenoned joints, and the flat panel insert is a three-ply plywood with a rotary cut hard maple veneer face.
The cabinet uses solid wood hanging strips located on the top and bottom, providing strong, continuous areas for fastening into wall framing.
The Warmwood cabinet uses maple flat panel doors with a recessed flat panel plywood insert, giving a classic recessed panel door appearance.
The cabinet uses concealed, self-closing hinges, so doors close smoothly and out of sight hardware keeps the front appearance clean in finished kitchens.
The Warmwood cabinet receives a 4 step process of stain, sealer, sanding and catalyzed top coat, giving a consistent finished surface on exposed wood areas.
The Warmwood 33 inch wide, 15 inch high, 12 inch deep wall cabinet from Kitchen Kompact brings mortised and tenoned solid 3/4 inch maple door frames, recessed three-ply maple veneer panels and concealed self-closing hinges together in a ready kitchen upper. Solid wood hanging strips on the top and bottom, reinforced by glued and power nailed solid wood corner blocks, support dependable wall fastening across jobs. The 4 step stain, sealer, sanding and catalyzed top coat process delivers a Warmwood finish that aligns with the Kitchen Kompact line, so a single WW33X cabinet can be dropped into coordinated layouts for straightforward planning.
Sold In: 1 Each