Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Kitchen Kompact Warmwood drawer base delivers a 15 inch wide base cabinet with a recessed panel style that fits standard kitchen layouts while giving installers a defined footprint for planning runs and appliance clearances. Door frames use mortised and tenoned construction of solid 3/4 inch maple, creating a rigid front that holds alignment under daily use and during transport into the job site. Solid wood corner blocks are glued and power nailed, tying the cabinet box together so the base resists racking when you level and shim. A flat panel plywood insert uses a three ply panel with a rotary cut hard maple veneer face, providing a stable center panel that takes finish evenly across the Warmwood look. Solid wood hanging strips are located on the top and bottom, giving you reliable anchor points for securing the cabinet to wall studs and keeping the run straight.
This Kitchen Kompact drawer base cabinet is 15 inches wide, 34-1/2 inches high and 24 inches deep, so it fits standard base cabinet footprints and common countertop depths in kitchen layouts. Solid wood hanging strips at the top and bottom give you clear spots to fasten into wall structure, helping you keep the cabinet tight to the wall and in line with adjoining units. Mortised and tenoned door frames in solid 3/4 inch maple resist twisting during handling and leveling, which supports smooth hinge function once the run is installed. Glued and power nailed solid wood corner blocks keep the box rigid while you scribe, shim, and tie it into neighboring cabinets. Concealed, self closing hinges are already matched to the maple flat panel doors, reducing hinge layout work and supporting consistent reveals.
The Kitchen Kompact WW15D cabinet provides a 15 inch Warmwood drawer base that fits well where a narrow base cabinet is needed between appliances or at the end of a run. The 34-1/2 inch height aligns with standard base cabinet heights, which helps create a level run for countertops. At 24 inches deep, the cabinet matches common kitchen base depths, allowing standard overhang from typical countertop materials. The recessed panel maple flat panel doors match the Warmwood finish, so this unit integrates with other Kitchen Kompact Warmwood pieces in a kitchen layout. Adjustable shelves inside the cabinet let you adapt storage for cookware, small appliances, or pantry items while keeping the exterior face consistent with adjoining fronts.
The mortised and tenoned solid 3/4 inch maple door frames give you a stable face to work against when aligning doors across multiple Kitchen Kompact drawer base cabinets, reducing time spent tweaking gaps. Solid wood corner blocks that are glued and power nailed reinforce the cabinet structure, so it stays square as you clamp bases together and draw them tight. The three ply flat panel plywood insert with a rotary cut hard maple veneer face keeps the door panel flat, which helps the concealed, self closing hinges operate smoothly without binding. Solid wood hanging strips located at the top and bottom simplify screw placement into studs, supporting a straight installation line. The 4 step process of stain, sealer, sanding and catalyzed top coat gives the Warmwood finish a consistent appearance, which helps multiple WW15D Warmwood drawer base units read as a uniform bank of cabinets once installed.
The Kitchen Kompact WW15D cabinet is 15 inches wide, 34-1/2 inches high and 24 inches deep, so it follows standard base cabinet sizing for kitchen layouts.
The door frames use mortised and tenoned solid 3/4 inch maple construction, giving the doors strong joints that hold alignment during everyday use and adjustment.
The cabinet uses solid wood corner blocks that are glued and power nailed, creating a rigid box that stays square during leveling and countertop installation.
The door has a flat panel plywood insert made from a three ply panel with a rotary cut hard maple veneer face, providing a smooth surface for the Warmwood finish.
The cabinet receives a 4 step process of stain, sealer, sanding and catalyzed top coat, producing a consistent finished surface for typical kitchen environments.
The Warmwood drawer base has adjustable shelves and maple flat panel doors mounted on concealed, self closing hinges, supporting flexible storage and a clean exterior look.
The Kitchen Kompact Warmwood drawer base gives you a 15 inch wide, 34-1/2 inch high, 24 inch deep cabinet built with mortised and tenoned solid 3/4 inch maple door frames, three ply plywood panels and solid wood corner blocks. Solid wood hanging strips at the top and bottom support secure fastening to wall framing, while the 4 step stain, sealer, sanding and catalyzed top coat process completes the Warmwood finish. For runs that need a narrow base with consistent Warmwood styling and cabinet shop grade construction details, the WW15D Warmwood drawer base aligns the structure, finish and sizing for streamlined installation.
Sold In: 1 Each