Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Kitchen Kompact Glenwood filler in the GW90X3F configuration is a 3 inch wide by 90 inch high component that aligns with the Glenwood F3-90 description, giving you a tall filler sized for full-height cabinet or panel runs. The product sits within the Kitchen Kompact cabinet class, so it is designed to work alongside frames built from solid 3/4 inch oak, maple, or beech, keeping materials consistent through visible transitions. Because the surrounding frames use solid 3/4 inch stock, this filler supports a similar visual scale when you need to carry a run to a wall or adjust for layout gaps. Using a filler sized at 90 inches helps bridge tall sections such as extended pantry or utility areas without piecing shorter parts, which simplifies layout and finishing.
The 3 inch width on this Glenwood F3-90 filler helps dial in small layout gaps between cabinets and walls while keeping the adjustment narrow enough to preserve door and drawer spacing. At 90 inches high, the GW90X3F piece spans a tall run that matches extended cabinet installations, which reduces vertical seams that would occur when stacking shorter parts. Because the surrounding Kitchen Kompact frames use solid 3/4 inch hardwood members, the filler can be planned to sit in line with those members so reveals, face edges, and finished ends remain visually straight from floor to top.
The Kitchen Kompact Glenwood filler, identified as GW90X3F and Glenwood F3-90, is suited to runs where you are using Kitchen Kompact cabinets in the Glenwood style and need a 3 inch by 90 inch vertical adjustment space. In tall wall or utility cabinet layouts, this sizing allows you to carry the line of cabinets to a wall or architectural break without changing door sizes in the main run. The Kitchen Kompact cabinet class uses frames of solid 3/4 inch oak, maple, or beech, so this filler can be coordinated to sit alongside those hardwood frames, supporting a consistent edge profile in visible positions. When used next to base cabinets with solid wood 3/4 inch toe kicks, the 90 inch height helps the filler track from the floor zone up through wall space for a continuous visual column.
Rails in the Kitchen Kompact system are kiln-dried, joined with mortise and tenon, and glued, which gives the frame structure around the filler strong joints that hold their shape as kitchens experience seasonal changes, helping keep margins straight. Solid wood corner blocks that are glued and power nailed add rigidity to cabinet corners near the filler, reducing twisting at transitions where a tall filler meets face frames. The 3/4 inch thick solid wood toe kicks tie a stiff base under adjacent cabinets, so when a tall filler is planned in the same run, the lower edge alignment remains steady. Solid wood hanging strips located at the top and bottom of wall and base cabinets create defined support zones, so cabinets on either side of the filler can be anchored consistently, which supports accurate reveals and straight sight lines along the Glenwood installation.
The Kitchen Kompact Glenwood filler GW90X3F is specified as 3 inches wide by 90 inches high, so it spans a tall vertical run while allowing 3 inches of layout adjustment in a cabinet installation.
The GW90X3F filler belongs to the Kitchen Kompact cabinet class, meaning it is intended to coordinate with Kitchen Kompact frames and materials in Glenwood-style installations.
Cabinet frames in the Kitchen Kompact line are built from solid 3/4 inch oak, maple, or beech, so areas adjoining the Glenwood filler use matching hardwood frame stock.
Each rail in the Kitchen Kompact frames is kiln-dried, mortise and tenon joined, and glued, providing stable surrounding structure that helps keep the filler alignment consistent.
Solid wood toe kicks, 3/4 inch thick, run under base sections near the filler, giving a firm visual and structural base line that aligns with the 90 inch tall filler run.
Solid wood hanging strips on adjacent wall and base cabinets are located at the top and bottom, defining mounting zones that help maintain straight reveals beside the filler.
The Kitchen Kompact Glenwood filler GW90X3F, sized at 3 inches by 90 inches, aligns with the Glenwood F3-90 description and fits tall cabinet runs that need precise gap control. With frames built from solid 3/4 inch oak, maple, or beech and reinforced by kiln-dried, mortise and tenon joined rails, the surrounding Kitchen Kompact cabinets form a stable structure that works cleanly with this filler. Use this Glenwood filler when a 3 inch by 90 inch adjustment piece will help carry your Kitchen Kompact cabinet line to its intended stopping point.
Sold In: 1 Each