Kitchen Kompact Glenwood vanity sink base is a 42 inch wide, 30-1/2 inch high and 21 inch deep vanity sink base cabinet that provides a defined footprint for bathroom layouts. The cabinet belongs to the Kitchen Kompact Glenwood series and uses a recessed panel style that sets the visual line for surrounding cabinets. The frames are built of solid 3/4 inch oak, maple or beech, so the front structure gives a rigid reference for doors, drawer fronts or applied trim. Each rail is kiln-dried, joined by mortise and tenon, and then glued, creating joints that resist shifting during daily door use. Solid wood toe kicks at 3/4 inch thick carry front impacts down to the floor, which supports stable feel along the vanity run. Solid wood corner blocks are glued and power nailed, tying the frame together to maintain squareness over time in typical bathroom humidity.
This Glenwood vanity sink base has a 42 inch width that sets a clear span for sink and counter selection. The 30-1/2 inch height positions the top edge to coordinate with typical vanity top heights once a countertop is added. A 21 inch depth matches common bathroom cabinet runs, so the front frame and toe kick line up with other 21 inch deep units. Solid wood hanging strips installed at both the top and bottom edges of wall and base cabinets offer continuous backing for fasteners, which helps transfer loads into wall studs. The 3-ply end panel construction with a 1/2 inch engineered wood core keeps cabinet sides straight along the full 21 inch depth.
The Glenwood vanity sink base, at 42 inches wide, suits bathroom layouts needing a single cabinet footprint that defines the sink area. The recessed panel design on this Glenwood cabinet establishes a consistent style line for other Kitchen Kompact units in the room. With 30-1/2 inches of cabinet height, the unit supports a range of vanity top thicknesses while maintaining comfortable reach to doors and any trim work. The 21 inch cabinet depth matches many standard vanity and base cabinet dimensions, which simplifies planning when aligning side panels with adjoining cabinetry. End panels using 3-ply construction with a 1/2 inch engineered wood core and hardwood veneers provide smooth sides, so the cabinet presents a finished appearance when exposed on one or both ends.
All frames on this Glenwood vanity sink base are built of solid 3/4 inch oak, maple or beech, so the front face frame acts as a sturdy reference edge when setting reveals to adjacent doors or panels. Each rail is kiln-dried, joined by mortise and tenon, and then glued, creating joints that limit seasonal movement at the front of the cabinet, which supports consistent gaps over time. Solid wood corner blocks that are glued and power nailed tie the frame to the cabinet box, helping the unit stay square when fasteners are driven through sides or strips. Solid wood toe kicks at 3/4 inch thick resist deflection at the bottom front, which helps maintain level support for finish materials across the cabinet width. Solid wood hanging strips on wall and base cabinets, located at the top and bottom, provide solid backing for screws into framing, distributing load across the cabinet. End panels built with 3-ply construction and a 1/2 inch engineered wood core with hardwood veneers create stable sides that respond predictably during scribing or trimming next to walls.
The Glenwood vanity sink base measures 42 inches wide, 30-1/2 inches high and 21 inches deep, so it matches many standard vanity layouts and countertop sizes.
The cabinet frame is built of solid 3/4 inch oak, maple or beech, giving the face frame substantial thickness for hinge mounting and alignment with adjoining cabinets.
Each rail is kiln-dried, joined by mortise and tenon, and then glued, which creates tight joints that hold the frame square during installation and daily door operation.
The cabinet uses solid wood toe kicks that are 3/4 inch thick, providing a firm base at the front where foot contact and cleaning activity commonly occur.
Solid wood corner blocks are glued and power nailed at the corners, tying the frame to the box and helping the cabinet remain square when positioned and fastened.
The end panels have 3-ply construction with a 1/2 inch thick engineered wood core and hardwood veneers, giving flat, stable sides suitable for exposed or scribed ends.
The Kitchen Kompact Glenwood vanity sink base GWV42S combines a 42 inch width, 30-1/2 inch height and 21 inch depth with solid 3/4 inch wood frames, mortise and tenon joints and 3-ply end panels. That combination creates a bathroom cabinet foundation that aligns with standard vanity layouts while offering rigid reference surfaces for doors, trim and counters. For projects using the Glenwood recessed panel style, this vanity sink base sets the primary sink footprint and provides solid wood hanging strips and toe kicks that support stable installation within the overall cabinet run.
Sold In: 1 Each