Kitchen Kompact 36"W x 12"H x 12"D Chadwood Wall Cabinet, Recessed Panel - CW36X12

Kitchen Kompact Chadwood Wall Cabinet For Upper Runs

Kitchen Kompact Chadwood wall cabinet defines a 36 inch wide, 12 inch high, 12 inch deep upper unit built for standard kitchen runs where shallow overhead storage is needed. The cabinet uses door frames with mortised and tenoned construction of solid 3/4 inch oak, which creates a tight, square joint that holds up well when doors are opened and closed repeatedly. A flat panel plywood insert is a three-ply panel with a rotary cut red oak veneer face, giving the door a stable core with a consistent Chadwood grain pattern across the kitchen. Solid wood corner blocks are glued and power nailed, tying the case together so the box stays rigid when the wall is loaded. Solid wood hanging strips located on the top and bottom give a solid fastening surface to the wall, which matters when lining up multiple wall units on a rail or layout line.

Construction Details That Support Daily Cabinet Use

• Door frames use mortised and tenoned construction of solid 3/4 inch oak, so the rail and stile joints lock together mechanically and chemically at the glue line, supporting long-term hinge performance on the Chadwood doors.
• A flat panel plywood insert is a three-ply panel with a rotary cut red oak veneer face, so the center panel stays flatter while presenting a continuous oak appearance that ties in with other Kitchen Kompact Chadwood pieces.
• Solid wood corner blocks are glued and power nailed, so each corner is braced from the inside, helping the cabinet stay square during handling, hanging, and when loading shelves with typical kitchen contents.
• Solid wood hanging strips are located on the top and bottom, so installers have substantial wood to fasten through at both rails, helping align CW36X12 units evenly along studs or other support.
• A 4 step process of stain, sealer, sanding and catalyzed top coat is applied, so the oak surfaces receive a uniform finish system that is built up in layers for color consistency across the Chadwood run.
• Adjustable shelves and concealed, self-closing hinges work together so interior space can be set to different heights while the doors close automatically, presenting a clean exterior line when the wall cabinet is in everyday use.

Wall Cabinet Mounting And Alignment Characteristics

Solid wood hanging strips located on the top and bottom define the primary mounting interface on this Kitchen Kompact wall cabinet, so fasteners engage real lumber instead of thin back material. That structure helps the CW36X12 sit flat against the wall when installers draw it up tight. Solid wood corner blocks are glued and power nailed, keeping the rectangular shape true, which matters when butting this 36 inch wide piece to adjacent Chadwood units. The cabinet depth of 12 inches keeps the unit in a standard overhead profile, simplifying layout above bases. Adjustable shelves allow interior spacing to be fine-tuned after the cabinet is fastened, so field alignment work focuses on the face frame and door reveals first, then on storage layout.

How The CW36X12 Chadwood Cabinet Works In Kitchens

Chadwood Wall Cabinet Placement In Runs

The Kitchen Kompact 36 inch wide, 12 inch high, 12 inch deep Chadwood wall cabinet fits where a shallow upper is needed, such as above work areas that require headroom. Door frames are mortised and tenoned construction of solid 3/4 inch oak, tying directly into concealed, self-closing hinges so the doors carry repeated movement across the width without racking. A flat panel plywood insert is a three-ply panel with a rotary cut red oak veneer face, helping the front appearance match other Chadwood wall and base pieces in the same project. Solid wood hanging strips located on the top and bottom allow CW36X12 units to line up along a support line, supporting typical upper cabinet layouts where several 36 inch sections are ganged side by side.

Details That Support Consistent Installation Results

Solid wood corner blocks are glued and power nailed at the corners, so the case resists twisting when it is lifted into place, which supports consistent door reveals after fastening. Solid wood hanging strips on both the top and bottom spread wall loads over more wood fiber, so installers can drive fasteners where structure is available while keeping the face frame straight. The 4 step process of stain, sealer, sanding and catalyzed top coat is applied to the oak, providing a finished surface that stays uniform from piece to piece when several Kitchen Kompact Chadwood wall cabinets share a run. Adjustable shelves allow the interior to be reconfigured after doors and faces are aligned, which supports efficient punch-out work because shelf positions can be set late in the sequence without disturbing the hung cabinet. Concealed, self-closing hinges keep the hardware hidden when the doors are shut, reinforcing the clean Chadwood flat panel look across a lineup of CW36X12 units.

Common Questions About The Kitchen Kompact CW36X12

Select The CW36X12 Chadwood For Coordinated Runs

The Kitchen Kompact 36 inch wide, 12 inch high, 12 inch deep Chadwood wall cabinet brings mortised and tenoned solid 3/4 inch oak door frames, a three-ply flat panel plywood insert with rotary cut red oak veneer face, and solid wood hanging strips on the top and bottom into one upper unit. Solid wood corner blocks that are glued and power nailed and a 4 step process of stain, sealer, sanding and catalyzed top coat support a stable, finished cabinet body ready to tie into broader Chadwood layouts. For projects using Kitchen Kompact Chadwood fronts, this CW36X12 wall cabinet helps build a consistent upper run with adjustable shelves and concealed, self-closing hinges.