Kitchen Kompact Chadwood drawer base gives you a 15 inch wide, 34-1/2 inch high, 24 inch deep cabinet that provides a defined footprint for kitchen layouts where base storage and drawer access matter. The recessed panel Chadwood design establishes a consistent look with other Kitchen Kompact pieces in the same line, so runs stay visually aligned. The CW15D identification ties this unit directly to the Kitchen Kompact Chadwood series, which simplifies ordering by exact model when matching existing cabinets on a job. Being a Kitchen Kompact product keeps this cabinet within the Kitchen Kompact category for projects already specified around that brand, which supports repeatable finish and door profile from cabinet to cabinet.
The 15 inch width lets this drawer base fill narrower spaces in a layout, which helps balance runs where standard widths leave gaps that need a defined cabinet. The 34-1/2 inch height aligns with typical base-cabinet and countertop heights, supporting a level work surface when this unit is set next to other Kitchen Kompact bases. The 24 inch depth fits common countertop depths, so the front face of the Chadwood drawer base sits in line with adjacent units for a straight finished front. Solid wood hanging strips at the top and bottom give installers continuous, solid fastening points, which helps maintain the set height and plumb position over the cabinet length.
The CW15D Chadwood drawer base fits kitchen runs that are specified around the Kitchen Kompact line, so designers can keep a consistent Chadwood door profile and recessed panel look from one cabinet to the next. Its 15 inch width allows the base to be placed in narrow sections of wall space, which is useful when centering sinks or ranges and then balancing leftover dimensions with standard cabinet sizes. The 24 inch depth matches typical base cabinet standards, so this unit works into new layouts or replacement scenarios where other Kitchen Kompact bases already set countertop depth. Solid wood hanging strips at the top and bottom of the cabinet provide mounting points along the length of the back, which supports stable attachment when this cabinet is used at transitions, ends, or between wider base units.
Mortised and tenoned solid 3/4 inch oak door frames give the door assembly defined corners and joint strength, which helps doors stay aligned for repeated opening and closing during normal kitchen use. The three-ply flat panel plywood insert with rotary cut red oak veneer face creates a stable center panel with an oak appearance, which supports consistent door behavior as humidity shifts through the year. Solid wood corner blocks that are glued and power nailed tie key cabinet joints together at the corners, which helps the box resist twisting during handling, setting, and countertop installation. The four step finishing process of stain, sealer, sanding, and catalyzed top coat builds up multiple layers on the oak surfaces, which promotes a uniform look across doors, frames, and visible cabinet parts within a Chadwood run. Concealed, self-closing hinges on the oak flat panel doors keep hardware out of sight when the door is closed, which maintains the clean recessed panel appearance while also returning doors to the closed position after use. Adjustable shelves inside the cabinet let installers or end users set shelf height to match stored items, which can reduce wasted vertical space and support better cabinet organization in daily kitchen work.
The Kitchen Kompact Chadwood CW15D drawer base measures 15 inches wide, 34-1/2 inches high, and 24 inches deep, so it fits standard base cabinet and countertop depth layouts.
The door frames are mortised and tenoned solid 3/4 inch oak, creating interlocking joints that support door stability and alignment during repeated everyday kitchen use.
The door uses a flat panel plywood insert with a three-ply construction and a rotary cut red oak veneer face, giving an oak look with plywood panel stability.
The cabinet uses solid wood corner blocks that are glued and power nailed, adding reinforcement at the corners to help the box stay square in service.
The cabinet receives a four step process of stain, sealer, sanding, and catalyzed top coat, building a layered finish that presents the oak appearance consistently.
The oak flat panel doors use concealed, self-closing hinges, keeping hardware hidden when shut and returning doors to the closed position after opening.
The Kitchen Kompact Chadwood drawer base CW15D gives you a 15 inch wide, 34-1/2 inch high, 24 inch deep cabinet that fits standard kitchen base layouts while maintaining the Chadwood recessed panel style. Mortised and tenoned solid 3/4 inch oak door frames, a three-ply flat panel plywood insert with rotary cut red oak veneer face, and solid wood corner blocks glued and power nailed all work together to support cabinet stability for normal kitchen use. Solid wood hanging strips at the top and bottom, adjustable shelves, and concealed self-closing hinges on the oak flat panel doors align this unit with Kitchen Kompact installation and performance expectations, so it can be specified confidently alongside other cabinets in the same line.
Sold In: 1 Each