Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Kitchen Kompact Chadwood vanity base identifies this 15 inch wide recessed panel cabinet as part of the Kitchen Kompact line, so it matches projects that call for the CWV15D Chadwood series in both look and construction. The cabinet body uses door frames with mortised and tenoned construction of solid 3/4 inch oak, which keeps joints mechanically locked for a rigid face frame that resists racking when the vanity is fastened in place. Solid wood corner blocks are glued and power nailed, tying the sides to the front so the base stays square during handling and installation. A flat panel plywood insert is a three-ply panel with a rotary cut red oak veneer face, giving the recessed panel profile a consistent grain surface ready to integrate with other red oak components. Solid wood hanging strips are located on the top and bottom, providing continuous solid material at key mounting lines for fastening to wall framing or neighboring cabinets.
Door frames with mortised and tenoned construction of solid 3/4 inch oak give the face of this CWV15D cabinet the strength needed when it is pulled tight to walls or other units, reducing flex as fasteners are driven. Solid wood corner blocks are glued and power nailed, so the box holds square while it is set, shimmed, and leveled along a run of bath cabinets. Solid wood hanging strips located on the top and bottom add continuous solid backing for screws into framing, supporting a secure mount across the width of the 15 inch Chadwood vanity drawer base. Adjustable shelves help fit around drain or supply locations by letting the installer set shelf height after rough plumbing is in place. Concealed, self-closing hinges on the oak flat panel doors keep hinge hardware out of sight and pull doors closed, which helps align reveals without constant manual adjustment during handover.
The Kitchen Kompact 15 inch wide by 30-1/2 inch high by 21 inch deep Chadwood Vanity Drawer Base, recessed panel, is sized for bath layouts that need a narrow vanity base in the CWV15D footprint. That width suits ends of runs or transition spaces where standard wider cabinets will not fit, while the 30-1/2 inch height and 21 inch depth match typical bath cabinet dimensions for a consistent counter line. Door frames are mortised and tenoned construction of solid 3/4 inch oak, matching other Chadwood recessed panel units that use the same solid oak framing approach. The flat panel plywood insert with a three-ply core and rotary cut red oak veneer face lets this vanity blend with other red oak veneer fronts in the room, streamlining visual alignment across a full bath project.
Solid wood corner blocks that are glued and power nailed keep the case rigid, so reveal gaps around doors and drawer areas remain consistent after the cabinet is fastened and loaded. Solid wood hanging strips located on the top and bottom offer dependable screw bite, which helps the cabinet stay tight to studs and neighboring cabinets without crushing weaker material. The 4 step process of stain, sealer, sanding and catalyzed top coat creates a sealed surface over the oak and veneer, giving the finish a layered build designed for repeated handling of doors and drawer fronts in a bathroom environment. Adjustable shelves support future layout changes inside the 15 inch Chadwood vanity drawer base, so storage can be reconfigured without altering the cabinet structure. Concealed, self-closing hinges on the oak flat panel doors pull the doors shut, promoting consistent door position and reducing the likelihood of doors drifting partly open over time.
The Kitchen Kompact 15 inch wide by 30-1/2 inch high by 21 inch deep Chadwood Vanity Drawer Base fits projects that call for this specific CWV15D footprint in bath layouts.
The cabinet uses door frames with mortised and tenoned construction of solid 3/4 inch oak, giving the frame strong mechanical joints that support alignment and daily door use.
The recessed panel insert is a three-ply plywood panel with a rotary cut red oak veneer face, providing a stable core and an oak veneer surface that coordinates with other red oak elements.
The cabinet uses a 4 step process of stain, sealer, sanding and catalyzed top coat, creating a layered finish intended for routine handling and cleaning in typical vanity environments.
The CWV15D vanity uses concealed, self-closing hinges on the oak flat panel doors, keeping hardware hidden while pulling doors closed for consistent position.
The solid wood hanging strips located on the top and bottom provide strong screw-holding areas, supporting a secure mount to wall studs and adjacent cabinets.
The Kitchen Kompact Chadwood vanity base in the CWV15D configuration brings a 15 inch wide by 30-1/2 inch high by 21 inch deep footprint together with solid 3/4 inch oak mortised and tenoned door frames, solid wood corner blocks, and solid wood hanging strips. The three-ply plywood recessed panel insert with rotary cut red oak veneer face and the 4 step process of stain, sealer, sanding and catalyzed top coat align this unit with other Chadwood recessed panel pieces. For projects calling for a narrow recessed panel vanity in the Kitchen Kompact Chadwood line, this cabinet provides a defined size and construction set to plug into planned bath runs.
Sold In: 1 Each