
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Kitchen Kompact Glenwood base end panel defines the exposed side of a Glenwood base cabinet, giving the run a finished look that matches the cabinet line. The panel is part of the Kitchen Kompact cabinet system and carries the Glenwood designation used in the GLENWOOD BEP description. As a base end panel, it is intended for use on base cabinets rather than wall cabinets, aligning the end with the solid wood construction used throughout the Kitchen Kompact line. This panel serves as the transition from cabinet to adjacent surfaces, so its build and structure directly affect how solid the finished cabinet installation feels over time.
The Glenwood BEP designation ties this base end panel directly to the Kitchen Kompact Glenwood cabinet construction, so its structure aligns with the way the cabinet boxes are built. The solid wood frames used in the cabinet system set a stable reference for the base end panel edge, which is important when lining up seams along a visible side. Kiln-dried rails joined by glued mortise and tenon joints keep the frame square, supporting clean alignment between the cabinet front and the side treatment. The 3-ply end panel build with a 1/2" engineered wood core and hardwood veneers provides a stable, flat surface that accepts finishing and scribing along walls or adjoining surfaces.
The Glenwood base end panel is designed as part of the Kitchen Kompact cabinet accessories line, matching the Glenwood base cabinet construction identified as GLENWOOD BEP. In a typical layout, it finishes the exposed side of a base cabinet run so that the same solid 3/4" oak, maple or beech frame construction carries visually from face frame to side treatment. Solid wood toe kicks at 3/4" thickness connect visually and structurally with the base area where the end panel terminates the run. Because the end panels use 3-ply construction with a 1/2" thick engineered wood core and hardwood veneers, they are suited to straight runs where a flat, stable surface is needed for finishing along floors and walls.
Each rail in the Kitchen Kompact system is kiln-dried, joined by mortise and tenon, and then glued, which means the frame that receives the Glenwood base end panel stays square under load from countertops and daily use. Solid wood corner blocks that are glued and power nailed further brace the box, so when an installer brings the end panel into plane with the cabinet, the structure resists twisting. Solid wood hanging strips on wall and base cabinets, located at the top and bottom, give consistent fastening lines that help keep the end panel edge parallel with the cabinet faces. The 3-ply end panel construction with a 1/2" engineered wood core and hardwood veneers delivers dimensional stability, helping the finished side stay flat and visually true over the life of the installation.
The Kitchen Kompact Glenwood base end panel is used to finish the exposed side of a Glenwood base cabinet, so the end of the run matches the cabinet system construction.
The end panels use 3-ply construction with a 1/2" engineered wood core and hardwood veneers, providing a flat, stable surface that helps the cabinet side stay true after installation.
All frames are built of solid 3/4" oak, maple or beech, so the end panel works with a cabinet structure based on solid hardwood components.
Each rail is kiln-dried, joined by mortise and tenon, and glued, which keeps the cabinet frame square and supports accurate alignment with the base end panel.
Solid wood hanging strips on wall and base cabinets, located at the top and bottom, give reliable fastening points that help keep the base end panel edge straight.
Solid wood toe kicks, 3/4" thick, align with the base end panel at the floor level, supporting the visible toe space and reinforcing the cabinet base area.
The Kitchen Kompact Glenwood BEP matches a cabinet system built with solid 3/4" hardwood frames, kiln-dried mortise and tenon rails, and solid wood corner blocks, so the side treatment follows the same structure. With 3-ply end panels using a 1/2" engineered wood core and hardwood veneers, the exposed base cabinet side gains a stable, finish-ready surface. For Glenwood base cabinet runs that need a finished end consistent with solid wood toe kicks and hanging strips, this base end panel provides a construction-matched solution.
Sold In: 1 Each