Kitchen Kompact Glenwood base corner cabinet GWH39BC is a 39 inch wide base corner unit designed for Glenwood kitchens where an ADA compliant, handicap base corner layout is required. The cabinet is specified at 39 inches wide, 32-1/2 inches high, and 24 inches deep, so it fits standard base cabinet depth while providing the dedicated Glenwood handicap base corner footprint. This Glenwood base corner configuration creates a defined corner zone that ties adjoining base runs together, which matters when planning countertops and toe space across an ADA focused layout. The recessed panel design establishes the Glenwood door style identity, so this base corner visually matches other Glenwood recessed panel cabinets in the same run. As part of the Kitchen Kompact line, this Glenwood base corner cabinet aligns with the Glenwood series dimensions, so it can be laid out with other Kitchen Kompact Glenwood cabinets in a coordinated installation.
The Glenwood handicap 39 base corner GWH39BC uses a pull-to dimension rather than a fixed diagonal box, so it must be pulled to 39 inches and may be pulled to 46 inches, giving a defined but adjustable corner span. That pull range lets the installer decide how far the front of the corner projects, which helps coordinate appliance clearances, door swings, and adjacent cabinet spacing in an ADA focused kitchen. Because the cabinet depth is 24 inches, the pull-to layout still ties into standard base cabinet runs, so wall measurements and scribes follow familiar base geometry even when the corner is pulled beyond 39 inches. The 32-1/2 inch height keeps the top of this base corner aligned with other Glenwood base units at the same elevation, which supports continuous work surface placement along both legs of the corner.
The Kitchen Kompact Glenwood base corner cabinet GWH39BC is described as a GLENWOOD HANDICAP 39 BASE CORNER, so it is intended for Glenwood handicap, or ADA oriented, base runs that meet at a corner. Its 39 inch width defines how much wall space is committed at the corner before any extra pull is added, which is useful when drawing a room that must respect clear floor areas. Because the cabinet must be pulled to 39 inches and may be pulled to 46 inches, it can be used where a designer wants a tighter 39 inch corner span or a more generous up-to-46 inch span between adjoining cabinet faces. The 24 inch depth means this handicap base corner blends into typical 24 inch deep base cabinet layouts, which helps keep counter lines and base toekick runs consistent from one wall to the other.
The GWH39BC pull guidance "must be pulled to 39 inches and may be pulled to 46 inches" gives a clear minimum and maximum span for the corner, so installers can place adjacent cabinets using precise edge-to-edge dimensions. Starting from the 39 inch minimum, the run can be extended in measured increments up to 46 inches, which gives flexibility to coordinate adjacent Glenwood cabinets, end panels, and appliance spaces without changing the cabinet itself. The fixed 32-1/2 inch height keeps the top level point predictable when adjusting that pull distance, which matters when setting shims and sub tops for a straight work surface. With a standard 24 inch depth working alongside the adjustable pull, the corner layout remains compatible with typical base cabinet geometry while still supporting the Glenwood handicap corner requirements.
The Kitchen Kompact GWH39BC is a Glenwood handicap 39 inch base corner cabinet, so it serves as the dedicated ADA focused base corner unit within a Glenwood style kitchen layout.
The Glenwood base corner cabinet is 39 inches wide, so corner layouts can be drawn from that base dimension when planning adjoining cabinet runs and countertop spans.
This Glenwood base corner cabinet is 32-1/2 inches high, so it establishes the base elevation for Glenwood runs that share the same countertop height.
The GWH39BC base corner is 24 inches deep, so it lines up with standard base cabinet depth in Glenwood installations and keeps counter geometry consistent.
The Glenwood handicap 39 base corner must be pulled to 39 inches, so 39 inches is the minimum front span used when dimensioning the corner opening.
The GWH39BC base corner may be pulled to 46 inches, so installers can open the corner span up to 46 inches when coordinating clearances and adjacent cabinets.
The Kitchen Kompact Glenwood base corner cabinet GWH39BC combines a 39 inch width, 32-1/2 inch height, and 24 inch depth with a pull range that must be pulled to 39 inches and may be pulled to 46 inches, so it supports precise, ADA focused Glenwood corner layouts. When a project calls for a GLENWOOD HANDICAP 39 BASE CORNER that visually aligns with Glenwood recessed panel styling, this cabinet provides the defined measurements and pull-to span needed to draw, dimension, and install the corner as part of a coordinated Kitchen Kompact Glenwood kitchen.
Sold In: 1 Each