Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Kitchen Kompact broom cabinet in the 18 inch wide by 90 inch high by 12 inch deep format provides a tall, narrow cabinet layout that fits typical pantry or broom closet runs while using minimal wall space in a kitchen project. The Warmwood WW18BRWT model uses door frames built with mortised and tenoned construction of solid 3/4 inch maple, creating a solid hardwood frame that holds alignment under daily door use. A flat panel plywood insert with a three-ply panel and rotary cut hard maple veneer face fills the door frame, giving a flat panel appearance that matches Warmwood styling throughout the Kitchen Kompact line. Solid wood corner blocks are glued and power nailed at the cabinet joints, tying the case together so installers get a rigid box to hang on the wall or stand in a run. Solid wood hanging strips are located on the top and bottom, giving clear structural grab points when fastening the cabinet to wall studs or adjacent cabinets.
This Warmwood broom cabinet is built at 18 inches wide, 90 inches high, and 12 inches deep, so it lines up with tall cabinet sections and narrow wall spaces common in broom and utility openings. Solid wood hanging strips at both the top and bottom of the cabinet are positioned to carry cabinet load into the structure, helping installers draw the box tight to framing or adjacent cabinets. Mortised and tenoned solid 3/4 inch maple door frames hang on concealed, self-closing hinges, so once the cabinet is set in place, doors swing cleanly and return shut without exposed hinge lines interrupting the Warmwood face. Solid wood corner blocks that are glued and power nailed reinforce the cabinet body, which helps maintain squareness as fasteners pull the cabinet into line with other Kitchen Kompact units.
The Kitchen Kompact 18 inch wide by 90 inch high by 12 inch deep Warmwood broom cabinet fits tall storage positions where floor-to-near-ceiling height is desired for cleaning tools and supplies. Its narrow 18 inch width lets it finish a cabinet run or stand beside a refrigerator or pantry opening while still delivering full-height interior space. The flat panel maple veneer insert, set in a mortised and tenoned solid 3/4 inch maple frame, keeps the front face in line with other Warmwood recessed panel cabinets, supporting visual continuity in Kitchen Kompact installations. Solid wood hanging strips at the top and bottom give clear locations to fasten the cabinet in these runs, so the tall case can be anchored securely in both stud-to-stud and cabinet-to-cabinet layouts around appliances or utility zones.
Mortised and tenoned door frame construction in solid 3/4 inch maple creates a square, rigid frame for the door, which helps doors stay aligned after the cabinet is set and trimmed into a run. The three-ply flat panel plywood insert with rotary cut hard maple veneer face sits stable in that frame, providing a flat surface that resists telegraphing core irregularities, which is important when installers align multiple fronts in a Warmwood bank. Solid wood corner blocks that are glued and power nailed tie the cabinet sides, top, and bottom together, so the tall box resists racking when lifted, slid, and clamped during installation. Solid wood hanging strips located at the top and bottom of the case carry mounting forces into solid lumber, giving predictable screw bite that supports long-term stability in both wall and floor-mounted tall cabinet layouts. The 4 step finishing process - stain, sealer, sanding, and catalyzed top coat - produces a hardened surface that tolerates routine contact during installation and everyday kitchen use, reducing touch-up work once the run is complete. Concealed, self-closing hinges on the maple flat panel doors let doors close under spring action, helping installers deliver consistent door reveal and shut lines on repeated projects using the WW18BRWT broom cabinet.
The Kitchen Kompact Warmwood WW18BRWT broom cabinet measures 18 inches wide, 90 inches high, and 12 inches deep, so it fits tall, narrow storage spaces in kitchen or utility layouts.
The broom cabinet doors use mortised and tenoned construction of solid 3/4 inch maple with a flat panel plywood insert, giving a solid frame and flat maple veneer face for stable, aligned fronts.
The door insert is a flat panel plywood made as a three-ply panel with a rotary cut hard maple veneer face, providing a smooth maple appearance on the Warmwood cabinet front.
The case uses solid wood corner blocks that are glued and power nailed, so the cabinet body is braced at the corners and stays rigid when moved and fastened into a run.
The cabinet has solid wood hanging strips located on the top and bottom, offering strong structural points to carry loads into wall framing or adjacent Kitchen Kompact cabinets.
The Warmwood cabinet receives a 4 step process of stain, sealer, sanding, and catalyzed top coat, producing a hardened finish that protects the maple veneer appearance in routine kitchen environments.
The Warmwood WW18BRWT Kitchen Kompact broom cabinet combines an 18 inch by 90 inch by 12 inch tall format with solid 3/4 inch maple mortised and tenoned door frames, three-ply maple veneer flat panels, and solid wood hanging strips at both ends of the case. Solid wood corner blocks glued and power nailed into the cabinet joinery, plus concealed, self-closing hinges on the maple flat panel doors, support clean operation once the cabinet is set into a Kitchen Kompact run. For projects calling for a tall, narrow Warmwood storage point that aligns with other Kitchen Kompact cabinets, this broom cabinet delivers a ready-to-install case and door construction that fits that role.
Sold In: 1 Each