Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Kitchen Kompact Warmwood sink front gives you a Warmwood recessed panel front sized for an 18 inch wide, 34-1/2 inch high sink cabinet run, so the front appearance matches the rest of the Kitchen Kompact line. The frame construction is built from solid 3/4 inch oak, maple, or beech, which provides a solid wood face that handles normal use around the sink area. Each rail is kiln-dried before assembly, so movement from moisture changes is reduced in service. The rails are joined by mortise and tenon, then glued, creating a mechanical joint that holds the frame square under load. Solid wood corner blocks are glued and power nailed, tying the structure together where stresses concentrate. End panels use 3-ply construction with a 1/2 inch thick engineered wood core and hardwood veneers, keeping panels stable while presenting a hardwood surface.
This Kitchen Kompact Warmwood sink front is sized at 18 inches wide and 34-1/2 inches high, matching common base cabinet dimensions for sink runs. That sizing lets installers line up the front with standard Kitchen Kompact base units so the top edges and vertical joints stay consistent. The recessed panel design keeps the visual style in line with matching Warmwood fronts, making it straightforward to continue the profile across the sink area. With solid wood hanging strips on wall and base cabinets located at the top and bottom, the connected cabinetry has defined mounting zones, which helps maintain alignment when fastening into structure.
The Kitchen Kompact Warmwood sink front is designed for use where an 18 inch wide, 34-1/2 inch high sink cabinet section is needed within a Kitchen Kompact Warmwood layout, so the sink area visually matches neighboring units. The recessed panel style lines up with other Warmwood fronts, giving a consistent profile across drawer bases and sink bases. Solid wood toe kicks at 3/4 inch thick run across the base line, supporting a continuous toe space along the run. End panels using 3-ply construction with a 1/2 inch engineered wood core and hardwood veneers allow this front to tie cleanly into adjacent ends, which helps keep the sink section visually flush with surrounding cabinet sides. Solid wood hanging strips on wall and base cabinets provide defined mounting zones, helping the entire section tie into structural supports as one system.
The solid 3/4 inch oak, maple, or beech frame gives the Warmwood sink front a stable reference edge for aligning with doors and drawer fronts, which helps reduce the need for repeated adjustment. Each rail is kiln-dried and joined by mortise and tenon, then glued, so the frame resists twisting and stays square, supporting even gaps from top to bottom. Solid wood corner blocks that are glued and power nailed help the front hold its geometry when moved, which is useful during handling and when aligning to countertops. Solid wood hanging strips on wall and base cabinets at the top and bottom establish straight mounting lines that match across units, so screws driven through those strips pull cabinets into plane more predictably. The 3-ply, 1/2 inch engineered wood core with hardwood veneers in the end panels adds stiffness to the cabinet sides tied to this front, supporting straighter seams where cabinets meet.
The Kitchen Kompact Warmwood sink front is 18 inches wide and 34-1/2 inches high, so it aligns with standard base cabinet sink heights and a narrow 18 inch sink base opening.
The frame is built of solid 3/4 inch oak, maple, or beech, providing a hardwood face that stands up to everyday contact and supports a solid feel on the cabinet front.
Each rail is kiln-dried, then joined by mortise and tenon and glued, creating a tight mechanical joint that helps the frame stay square under load and over time.
End panels use 3-ply construction with a 1/2 inch engineered wood core and hardwood veneers, which keeps the panel stable and helps maintain flat, aligned cabinet sides.
Solid wood hanging strips on wall and base cabinets, located at the top and bottom, provide continuous fastening zones that support straight, secure attachment to structure.
Solid wood toe kicks at 3/4 inch thick give the lower front edge a strong profile, helping the toe space withstand repeated foot and cleaning contact along the base run.
The Kitchen Kompact Warmwood sink front with recessed panel styling, solid 3/4 inch hardwood frame, kiln-dried mortise and tenon rails, and 18 inch by 34-1/2 inch sizing gives you a defined solution for completing a Warmwood sink base run. Solid wood corner blocks, 3-ply end panels with 1/2 inch engineered wood cores and hardwood veneers, and solid wood hanging strips on wall and base cabinets work together to support straight installation and consistent alignment. Choose the WWSFRONT Warmwood sink front to carry the Kitchen Kompact construction and appearance through the sink area in a coordinated cabinet line.
Sold In: 1 Each