Kitchen Kompact Warmwood wall corner cabinet WW24WCT is a 24 inch wide, 36 inch high, 12 inch deep wall corner unit that turns dead corner wall space into enclosed storage, helping organize upper cabinet runs in a consistent layout. The recessed panel front matches the Warmwood line, so the 24W x 36H x 12D size ties into standard wall cabinet heights while using corner space efficiently in typical kitchen layouts. As a wall corner cabinet, it anchors adjacent wall units, giving installers a defined point to start or finish a run. The Warmwood style and dimensions align with Kitchen Kompact kitchen installations where uniform height and depth matter for straight lines at crown and light rail. This cabinet is part of the Kitchen Kompact cabinet offering, so it fits projects that use this product class for a coordinated appearance across the room.
The 24 inch width, 36 inch height, and 12 inch depth give installers fixed reference dimensions for laying out wall cabinet runs, so the Warmwood wall corner unit aligns with adjacent Kitchen Kompact cabinets. Solid wood hanging strips at the top and bottom of the cabinet provide continuous solid wood for mounting points, supporting secure attachment along both mounting rails on the wall. Concealed, self-closing hinges on the maple flat panel doors keep hinge hardware inside the cabinet frame, helping maintain straight reveals at the front edge when doors are adjusted. The mortised and tenoned solid 3/4 inch maple door frames hold hinge screws in solid wood, supporting long-term alignment of the door swing on a corner location.
The Kitchen Kompact 24 inch wide, 36 inch high, 12 inch deep Warmwood wall corner cabinet WW24WCT is sized to integrate into standard-height wall rows, so it fits kitchen layouts built around 36 inch wall cabinet runs. In an upper corner, the 12 inch depth lines up with typical wall cabinet depths, helping create a flush front across adjoining units. As a corner cabinet from the Kitchen Kompact product class, it is intended for use within Kitchen Kompact kitchens where Warmwood finish and recessed panel styling are used on other wall and base cabinets. Solid wood hanging strips on both top and bottom give flexibility on stud locations at the corner, allowing the corner unit to anchor the rest of the wall run in that area. The warm maple veneer face on the flat panel plywood insert and the maple flat panel doors create a consistent maple look across doors when used next to other Warmwood cabinets.
The mortised and tenoned construction of the solid 3/4 inch maple door frames provides tight, square joints, helping the doors stay true over time, which keeps door gaps consistent along adjoining wall cabinets. Solid wood corner blocks that are glued and power nailed stabilize the cabinet box, so measurements at 24 inches wide, 36 inches high, and 12 inches deep stay accurate while the cabinet is lifted, positioned at the corner, and fastened. The three-ply flat panel plywood insert with a rotary cut hard maple veneer face adds dimensional stability to the recessed panel doors, reducing panel movement that could affect finish lines. A four step finish of stain, sealer, sanding, and catalyzed top coat on the Warmwood surfaces creates a hardened coating that stands up to repeated door contact, supporting a long-term uniform appearance next to matching pieces. Concealed, self-closing hinges simplify achieving clean, even reveals at the door edges because hinge action pulls the doors consistently into the face frame, which matters on a highly visible corner.
The WW24WCT Warmwood wall corner cabinet measures 24 inches wide, 36 inches high, and 12 inches deep, so it aligns with standard wall cabinet runs in many kitchen layouts.
The door frames use mortised and tenoned solid 3/4 inch maple construction, which creates strong, square joints that hold up to frequent door use on a corner cabinet.
The cabinet uses solid wood corner blocks that are glued and power nailed, helping the box stay square during hanging and while supporting stored items over time.
The recessed door uses a flat panel plywood insert made as a three-ply panel with a rotary cut hard maple veneer face, giving a stable maple appearance.
The Warmwood finish uses a four step process of stain, sealer, sanding, and catalyzed top coat, providing a hardened surface suited to regular handling and cleaning.
The cabinet uses concealed, self-closing hinges on the maple flat panel doors, so doors close themselves and hardware stays hidden inside the cabinet frame.
The Kitchen Kompact Warmwood wall corner cabinet WW24WCT brings a 24 inch wide, 36 inch high, 12 inch deep corner solution with recessed maple panel styling, solid maple mortised and tenoned door frames, and concealed self-closing hinges. The solid wood hanging strips and solid wood corner blocks give the cabinet a stable structure for mounting into a corner and tying in adjacent wall cabinets. For Kitchen Kompact Warmwood projects that need an upper corner solution matching the rest of the line, this wall corner cabinet provides the dimensions, construction, and Warmwood finish needed to keep the run consistent from corner to corner.
Sold In: 1 Each