Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Kitchen Kompact Chadwood wall corner cabinet is a 24 inch wide, 36 inch high, 12 inch deep wall corner unit designed to build into a continuous wall run while using corner space efficiently. The cabinet uses door frames built with mortised and tenoned construction of solid 3/4 inch oak, creating a tight joint that supports repeated door use in a busy kitchen. Solid wood corner blocks are glued and power nailed, tying the cabinet box together so the case stays square during hanging and over years of opening and closing. A flat panel plywood insert with a three-ply panel and rotary cut red oak veneer face gives the door a stable center panel with a matching oak appearance. Solid wood hanging strips located on the top and bottom provide a robust mounting area to fasten the wall corner to wall framing or cleats.
This Kitchen Kompact wall corner cabinet uses solid wood hanging strips on the top and bottom, giving you defined zones to align with wall studs or mounting rails during layout. The 24 inch width, 36 inch height, and 12 inch depth dimensions set the outside size, helping you coordinate this Chadwood corner with adjacent wall cabinets in the same run. Concealed, self-closing hinges are built into the door design, providing a clean exterior appearance while pulling the door closed at the end of its swing, which supports consistent door alignment after normal use. The oak flat panel doors combine the solid 3/4 inch oak frame and flat panel plywood insert, giving a unified door assembly that works with the hinge system.
The CW24WCT wall corner cabinet, with its 24 inch width, 36 inch height, and 12 inch depth, is sized for standard-height wall runs where a corner turn is required. The recessed panel Chadwood door style, using a flat panel plywood insert with a rotary cut red oak veneer face and solid 3/4 inch oak door frames, aligns visually with other Kitchen Kompact Chadwood cabinets in the same kitchen. Solid wood corner blocks that are glued and power nailed tie the cabinet box together, which helps the unit stay square when it is used to bridge two walls at a corner. Adjustable shelves inside the cabinet allow interior space to be set for taller or shorter items while still using the full corner volume. The oak flat panel doors create a consistent look that matches the rest of a Chadwood layout.
The door frames on this Kitchen Kompact Chadwood wall corner cabinet use mortised and tenoned construction of solid 3/4 inch oak, giving the hinge stile and rail joints a robust mechanical connection that supports repeated door cycles once installed. Solid wood hanging strips on the top and bottom give defined mounting zones where fasteners can bite deeply into wood, helping the CW24WCT stay anchored when loaded with contents. Solid wood corner blocks, glued and power nailed, help the cabinet maintain its geometry while it is lifted, clamped, and fastened during install. The 4 step finish system - stain, sealer, sanding, and catalyzed top coat - builds a protective coating on the oak and veneer surfaces, supporting routine cleaning in a kitchen environment. Concealed, self-closing hinges keep hardware out of sight while drawing the door shut, which supports consistent reveals along adjacent Chadwood cabinets.
The CW24WCT Chadwood wall corner cabinet is 24 inches wide, 36 inches high, and 12 inches deep, so it matches standard wall cabinet height and depth in many kitchen layouts.
The door frames use mortised and tenoned construction of solid 3/4 inch oak, providing strong joints at the corners that support the hinges and repeated door use over time.
The recessed door uses a flat panel plywood insert that is a three-ply panel with a rotary cut red oak veneer face, giving a stable center panel with an oak grain appearance.
Solid wood hanging strips located on the top and bottom create defined fastening areas, so mounting screws engage solid wood for a secure wall connection.
Concealed, self-closing hinges keep hardware hidden when the door is shut and pull the door closed at the end of its swing, supporting consistent alignment in daily use.
The 4 step process of stain, sealer, sanding, and catalyzed top coat creates a multi-layer finish that protects the oak and veneer surfaces during normal kitchen use and cleaning.
The Kitchen Kompact Chadwood wall corner cabinet with 24 inch width, 36 inch height, and 12 inch depth provides a defined solution for turning a corner in a Chadwood kitchen layout. Mortised and tenoned solid 3/4 inch oak door frames, solid wood corner blocks, and solid wood hanging strips give the CW24WCT the structural detail needed to hang, load, and use the cabinet in a working kitchen. Adjustable shelves, a flat panel plywood insert with a rotary cut red oak veneer face, and concealed, self-closing hinges tie function and appearance together so the corner unit can match the rest of your Kitchen Kompact Chadwood run.
Sold In: 1 Each