Kitchen Kompact 15"W x 32-1/2"H x 24"D Glenwood Drawer Base, Recessed Panel - GWUD15D

Kitchen Kompact Glenwood Drawer Base For ADA Layouts

Kitchen Kompact Glenwood drawer base is a 15 inch wide, 32-1/2 inch high, 24 inch deep cabinet designed as a 4 drawer stack. This defined footprint lets installers lay out base runs and appliance gaps with predictable sizing, which keeps cabinet lines consistent across the kitchen. The drawer base uses a Glenwood recessed panel design, so it maintains visual continuity with matching Glenwood fronts on adjacent cabinets. The unit is ADA compliant, so its 32-1/2 inch overall height supports accessible countertop planning where regulated work-surface heights are required. As a functioning 4 drawer stack, every drawer position is active storage, allowing concentrated organization of utensils, tools, or small parts in a narrow base opening. Toe kick dimensions of 4 inches high by 3 inches deep are specified, so the lower front clearance aligns with common toe space expectations while preserving stable front-to-back footprint.

Glenwood Drawer Base Details That Support Layout

• The 15 inch width fixes the cabinet footprint in tight runs, which simplifies planning around appliances or walls when every inch of base space affects clearances.
• The 32-1/2 inch height works with ADA compliant design, so installers can coordinate countertop height across a run without reworking surrounding cabinet sizes.
• The 24 inch depth matches standard base depths, allowing this drawer base to sit flush with adjacent cabinets for a continuous front line and uniform counter support.
• The 4 drawer stack configuration means each of the four positions is a functioning drawer, so narrow spaces can still deliver segmented storage for organized layouts.
• The Glenwood recessed panel style keeps the drawer fronts visually consistent with Glenwood design, so the drawer base aligns with matching doors and drawers in the same series.
• The 4 inch high by 3 inch deep toe kick dimension provides defined lower clearance while maintaining cabinet stability and a familiar stance along the floor line.

ADA Compliant Drawer Base Installation Fit

This Kitchen Kompact 15 inch wide drawer base uses its fixed 24 inch depth to align with standard base cabinetry, which simplifies templating and scribing during countertop work. The 32-1/2 inch cabinet height ties directly to ADA compliant layouts, so base rows can be set for accessible work-surface height using this measurement as a control dimension. Its toe kick size of 4 inches high by 3 inches deep provides a known lower offset, which helps installers plan toe space transitions at end panels and returns. As a 4 drawer stack, the functioning drawers occupy the full cabinet height, giving a repeatable drawer spacing pattern that matches the stated overall dimensions and helps with hardware alignment across a run.

Using This Glenwood Drawer Stack In Kitchen Runs

Where The GWUD15D Drawer Base Fits Best

The Glenwood GWUD15D drawer stack is sized at 15 inches wide, so it fits naturally where a narrow cabinet is needed between larger bases or appliances. Its 24 inch depth lets it sit in the same plane as standard Kitchen Kompact base units, helping keep countertop overhang and front alignment consistent along the wall. With a 32-1/2 inch cabinet height and ADA compliant design, this drawer base serves well in accessible kitchen runs where all base cabinets must coordinate to the same working height. The Glenwood recessed panel drawer fronts allow the unit to visually match other Kitchen Kompact Glenwood pieces, which keeps face lines and panel styling unified from cabinet to cabinet.

Why These Drawer Base Details Reduce Rework

The defined 15 inch width, 32-1/2 inch height, and 24 inch depth give installers clear dimensions to design around, which supports accurate takeoffs and reduces layout changes once cabinets are on site. The full 4 drawer stack of functioning drawers maximizes use of the cabinet height, so the storage plan installed in drawings matches the actual cabinet delivered. Toe kick measurements of 4 inches high by 3 inches deep provide a fixed reference when cutting toe skins or aligning adjacent bases, helping maintain a straight toe line across the floor. Because this is a Kitchen Kompact Glenwood recessed panel unit, trim details, end panels, and nearby Glenwood cabinets share a consistent profile, which cuts down on field adjustments to visually blend different styles. The ADA compliant height further anchors design work where accessible standards apply, tying the cabinet layout directly to a known regulatory dimension.

Common Questions About This Glenwood Drawer Base

Selecting This Drawer Base For Glenwood Runs

The Kitchen Kompact Glenwood GWUD15D drawer base combines a 15 inch width, 32-1/2 inch ADA compliant height, and 24 inch depth with a full 4 drawer stack and recessed panel style. These defined dimensions and the specified 4 inch by 3 inch toe kick give installers fixed references for layout and elevation work. When a narrow, functioning drawer stack is needed in an accessible kitchen run using Glenwood fronts, this cabinet provides a clearly identified option under a single Kitchen Kompact part number.