Glenwood universal design 30 base cabinet describes the Kitchen Kompact 30 inch wide base cabinet that is built for universal design, so it supports ADA compliant layouts where lower working heights and clear access are needed around a run of bases. The cabinet is identified as model GWUD30B in the Glenwood line, which helps align it with other Glenwood units on a drawing or ordering list for a coordinated run. A 30 inch width gives a straightforward footprint for planning base storage, so it drops into standard 30 inch openings without reworking surrounding cabinets. The cabinet height of 32-1/2 inches pairs with ADA compliant countertop heights, helping keep work surfaces in reach while staying consistent across the kitchen line. A 24 inch depth matches typical kitchen counter depth, so it lines up with adjoining cabinets and countertops for a clean front and efficient workspace.
The Kitchen Kompact 30 inch wide by 32-1/2 inch high by 24 inch deep Glenwood base cabinet works into standard kitchen base layouts, so planning centerlines and filler sizes becomes more predictable. Its 24 inch depth lets the front align with adjacent bases and typical countertop depths, which supports a straight front line for scribing and templating. The 32-1/2 inch cabinet height supports ADA compliant countertop heights, helping achieve required finished surface elevations without additional cabinet modification. With 3 inch side stiles framing the box, there is defined material at the sides to position against walls or neighboring cabinets during installation. The 4 inch high by 3 inch deep toe space provides a consistent lower recess to carry across multiple units, so the kick board can be cut and installed in a straight, even plane.
The Glenwood ADA base cabinet GWUD30B from Kitchen Kompact is suited to base positions calling for a 30 inch width, so it fits well under work areas like prep zones or general storage sections. Its universal design orientation supports ADA compliant planning, so it works in kitchens where accessible reach ranges and knee space planning drive cabinet selection. The 32-1/2 inch cabinet height coordinates with accessible countertop heights, so it helps create a continuous work surface that remains usable along the full run. A 24 inch depth matches common countertop and appliance depths, which lets the front of this cabinet align with neighboring bases for a clean finished line. The recessed panel Glenwood styling provides a consistent look alongside other Glenwood wall and base cabinets, which simplifies creating a matched set across the kitchen.
The 4 inch high toe kick on the Glenwood universal design 30 base cabinet establishes the vertical dimension of the lower recess, so installers can run a uniform kick across several bases and hold a level reference when setting finished floor transitions. The 3 inch deep toe recess sets how far the toe area pulls back from the face, which guides layout of the front edges of adjacent units and helps maintain comfortable standing room at the counter. With 3 inch side stiles, this cabinet provides consistent framing at each side, helping keep door alignment and hinge positioning uniform across multiple Glenwood base cabinets. The 30 inch width, 32-1/2 inch height, and 24 inch depth combination creates a known box size, so once one GWUD30B is fitted correctly, repeating that position along a run follows the same dimensions and simplifies layout work.
The Glenwood universal design 30 base cabinet measures 30 inches wide, 32-1/2 inches high, and 24 inches deep, so it fits standard base cabinet openings and typical kitchen countertop depths.
The 4 inch high toe kick on this Glenwood ADA base cabinet creates a predictable recess height, helping users stand closer to the counter and supporting consistent toe space across a base run.
The 3 inch deep toe kick sets how far the lower front recess extends under the cabinet face, guiding kick board placement and helping align fronts of adjoining Kitchen Kompact bases.
The 3 inch side stiles give the Glenwood recessed panel base cabinet defined vertical framing, supporting door mounting and helping keep spacing consistent between adjoining units in a row.
The GWUD30B cabinet is described as a Glenwood universal design 30 base, so it belongs to the Glenwood series and coordinates with other Glenwood cabinets in a layout.
The 32-1/2 inch cabinet height on this ADA compliant Glenwood base supports accessible countertop elevations, helping keep work surfaces within reach in universal design kitchens.
The Kitchen Kompact Glenwood universal design 30 base cabinet GWUD30B offers a 30 inch width, 32-1/2 inch height, and 24 inch depth, so it fits common base openings in ADA focused layouts. Its 4 inch high by 3 inch deep toe kick and 3 inch side stiles provide defined reference points for lining up fronts and framing doors along a run. For projects using the Glenwood style with recessed panels and universal design requirements, this base cabinet gives a clearly specified unit to plug into your layout and ordering plan.
Sold In: 1 Each