Kitchen Kompact Glenwood sink base is a 42 inch wide cabinet built for projects that call for an ADA compliant base under a sink or range. The cabinet height of 32-1/2 inches sets the working surface lower than standard bases once a countertop is installed, which supports accessible layouts where reach and clearance matter. The 24 inch depth aligns with common kitchen counter depths, so this unit fits cleanly into standard runs without odd overhangs. As a 42 inch wide cabinet, it spans more wall space under a sink or cooktop, which helps create a wider working area in universal design kitchens. The recessed panel styling on the Glenwood front adds definition to the door faces, bringing a finished look that suits many residential and light commercial interiors where consistent front appearance is important.
This Kitchen Kompact Glenwood universal design 42 range/base/sink cabinet is sized to tie into standard kitchen footprints. At 42 inches wide and 24 inches deep, it lines up with typical base cabinet runs and countertop projections, which simplifies layout against adjacent units. The 32-1/2 inch height reflects the ADA compliant intent, so the sink or range platform will sit lower than standard units once the top is set, supporting universal design projects where clear underneath space is needed. The 3 inch side stiles called out in the web description create structure at each side of the cabinet, which provides material at the ends for fastening into neighboring cabinets or wall framing during installation.
The Glenwood GWUD42RBS cabinet is described as a universal design 42 range/base/sink unit, which positions it for kitchens where one cabinet may serve under a sink, a cooktop, or as a base in an accessible work zone. Its ADA compliant 32-1/2 inch height supports projects that require lower finished tops for wheelchair access or easier reach from seated positions. The 42 inch width gives room to center a sink bowl or range while still leaving space inside the cabinet footprint, which helps planners create comfortable working zones in residential or break-room settings. With a 24 inch depth that tracks standard counters, the cabinet integrates into existing lines when tying into other Kitchen Kompact components on the same wall.
The universal design description and ADA compliant height on this Glenwood sink base translate directly into predictable finished dimensions, which helps designers and installers calculate countertop height and clearances before any cuts are made. The 3 inch side stiles referenced in the web description provide consistent solid edges along both sides of the 42 inch frame, which are valuable mounting areas when the cabinet is drawn into a straight run with neighboring units. Because the unit is classified as a 42 range/base/sink, one model number can cover several roles in a bank of cabinets, which reduces variation on site and keeps elevations more uniform. The recessed panel Glenwood front keeps styling consistent, which matters when aligning door reveals across long runs where even small visual mismatches stand out.
The Kitchen Kompact Glenwood sink base measures 42 inches wide, 32-1/2 inches high, and 24 inches deep, so it matches standard counter depth while providing a lower ADA oriented base height.
The 32-1/2 inch cabinet height sets the starting point for a lower finished counter, which supports ADA oriented layouts and helps coordinate sink or range heights in universal design kitchens.
The manufacturer part number GWUD42RBS identifies the Glenwood universal design 42 range/base/sink cabinet, which helps match this specific ADA oriented unit to drawings or replacement needs.
The SAP description states Glenwood universal design 42 range/base/sink, meaning this single cabinet style is intended to serve under a sink, range, or as a base in accessible layouts.
The web description notes 3 inch side stiles, which provide wider structural edges along each side of the cabinet for fastening into adjacent cabinets or wall framing in a straight run.
The product name describes a recessed panel Glenwood design, which gives the front a defined, classic look that coordinates with other Kitchen Kompact Glenwood cabinets on the same project.
The Kitchen Kompact Glenwood GWUD42RBS cabinet brings together ADA compliant 32-1/2 inch height, 42 inch width, and 24 inch depth in a single universal design 42 range/base/sink unit. That combination helps planners and installers build accessible kitchen or break-room runs using a known footprint and a consistent Glenwood recessed panel front. For projects through Wurth Baer Supply that call for a lower sink or range base with traditional styling, this Kitchen Kompact Glenwood sink base offers a defined size and part number to drop into drawings and material lists.
Sold In: 1 Each