Kitchen Kompact Glenwood oven cabinet gives you a 30 inch wide, 96 inch high, 24 inch deep housing for a built-in oven run, so you can plan tall appliance walls around a consistent cabinet footprint. The solid 3/4 inch oak, maple, or beech frames create a rigid front structure that holds alignment across the full 96 inch height, which helps doors and oven fronts stay even with adjacent cabinets over time. Each frame rail is kiln-dried, then joined by mortise and tenon and glued, so the face frame behaves as one unit under load instead of flexing at joints during handling and installation. Solid wood corner blocks are glued and power nailed into the cabinet, tying the sides to the frame at the corners so the tall box stays square as it is set, shimmed, and fastened in the field.
The Glenwood GW30OUXT oven cabinet measures 30 inches wide, 96 inches high, and 24 inches deep, giving installers a defined footprint for planning appliance rough openings and adjacent cabinet runs. Solid 3/4 inch frames at the front give a firm reference edge when aligning this cabinet with neighboring units, helping create a straight face plane across a long wall. Solid wood toe kicks at 3/4 inch thick support shimming and leveling at the floor, which is important on uneven substrates when a tall unit must stay plumb from toe to top. End panels built from a 1/2 inch engineered wood core with hardwood veneers give a stable side surface for scribing to walls, so the tall cabinet can be fitted tight without telegraphing minor wall irregularities.
The Kitchen Kompact 30 inch oven cabinet is built as a 96 inch tall, 24 inch deep unit, so it fits into full-height runs where wall and base cabinets stack around built-in ovens. That fixed height helps align the oven cabinet top with other tall pantry or utility cabinets in the same line. Solid wood hanging strips located at the top and bottom on wall and base cabinets give defined mounting zones when tying adjacent units into studs, which supports a straight, rigid bank around the oven opening. End panels with 3 ply, 1/2 inch engineered wood cores and hardwood veneers provide smooth cabinet sides that visually tie into matching Glenwood pieces, supporting a continuous run where oven cabinets sit between other Kitchen Kompact elements.
The solid 3/4 inch oak, maple, or beech frames give the oven cabinet a stiff front face, which helps heavy oven doors operate without twisting the frame or opening up joints over time. Kiln-dried rails, joined with mortise and tenon and glued, create joints that resist movement at the corners, so reveals around adjacent doors and drawer fronts stay consistent as the home cycles through temperature and humidity changes. Solid wood corner blocks, glued and power nailed, tie the frame to the cabinet sides so the structure acts as a single box when it is lifted, slid, or anchored, reducing the need for field bracing on the job. The 3/4 inch solid wood toe kicks carry the vertical load to the floor while leaving enough material for trimming or scribing at the front, which helps install a clean base line even where the floor is out of level. The 3 ply end panel construction with a 1/2 inch engineered wood core and hardwood veneers controls seasonal movement while keeping a hardwood appearance, so the tall cabinet sides remain flatter against walls and neighboring cabinets through regular use.
The Kitchen Kompact Glenwood oven cabinet is 30 inches wide, 96 inches high, and 24 inches deep, which lets you plan tall oven runs and align it with standard-depth base cabinets.
The Glenwood oven cabinet frame is built from solid 3/4 inch oak, maple, or beech, providing a rigid front structure that supports door alignment and oven operation in a tall installation.
The cabinet frame rails are kiln-dried, then joined with mortise and tenon joints and glued, which helps the face frame act as a single unit and reduces joint movement over time.
The end panels use 3 ply construction with a 1/2 inch engineered wood core and hardwood veneers, giving a stable, flat surface that helps side panels stay true in tall installations.
The 3/4 inch thick solid wood toe kicks provide enough material to support shimming and leveling at the floor, which is important for keeping the tall cabinet plumb.
The solid wood hanging strips on wall and base cabinets run at the top and bottom, offering continuous wood for fasteners and helping distribute mounting loads across the cabinet width.
The Kitchen Kompact Glenwood 30 inch wide, 96 inch high, 24 inch deep oven cabinet gives you a defined tall unit size, backed by solid 3/4 inch wood frames and 3 ply end panels with hardwood veneers. Those construction details support square, plumb installation in full-height appliance walls and help doors and oven fronts line up with nearby cabinets. For Kitchen Kompact layouts built around built-in ovens, the GW30OUXT provides a consistent cabinet structure to anchor the run.
Sold In: 1 Each