Kitchen Kompact Warmwood wall corner cabinet gives you a 24 inch wide, 42 inch high, 12 inch deep wall corner unit that ties together adjacent runs while keeping storage accessible. The recessed panel Warmwood design matches other Kitchen Kompact pieces, so a wall layout can stay consistent around the turn. The cabinet uses maple flat panel doors, so the face presents a clean maple grain that works in a range of kitchen styles. Door frames are mortised and tenoned construction of solid 3/4 inch maple, which creates a tight joint at every rail and stile intersection for long-term squareness. Solid wood corner blocks are glued and power nailed, which adds internal bracing so the cabinet can handle day-to-day door use without racking. A flat panel plywood insert is a three-ply panel with a rotary cut hard maple veneer face, giving a stable panel core with a matching maple appearance on the inside face of the door. Solid wood hanging strips located on the top and bottom give you solid material to work against when securing the cabinet to wall framing for a sturdy wall installation.
This Kitchen Kompact 24 inch wide by 42 inch high by 12 inch deep wall corner cabinet is built with solid wood hanging strips located on the top and bottom, so installers can source fastening points anywhere along those strips to land on framing. Door frames use mortised and tenoned construction of solid 3/4 inch maple, which keeps the doors square as they are hung and adjusted on the concealed, self-closing hinges. Solid wood corner blocks are glued and power nailed, so the case stays rigid as it is pulled tight into a corner. The flat panel plywood insert is a three-ply panel with a rotary cut hard maple veneer face, maintaining consistent door thickness as you line up reveals with neighboring cabinets. Adjustable shelves inside can be set after mounting, which keeps handling weight lower during lifting while still delivering a flexible storage layout once the unit is on the wall.
The Kitchen Kompact 24 inch wide, 42 inch high, 12 inch deep Warmwood wall corner cabinet is designed for corner positions in a wall run, allowing adjacent wall cabinets to meet cleanly at 90 degrees. Maple flat panel doors and a recessed panel style tie visually into other Kitchen Kompact units in the same Warmwood line, keeping the upper layout coordinated. Door frames are mortised and tenoned construction of solid 3/4 inch maple, so the corner cabinet door set holds the same profile and edge lines as straight-run cabinets that share this construction. The flat panel plywood insert is a three-ply panel with a rotary cut hard maple veneer face, which gives the door center a maple appearance that works alongside other maple-faced cabinets. Solid wood hanging strips located on the top and bottom align with normal wall fastening practices, helping the corner piece integrate into a standard stud layout. Adjustable shelves allow the corner space to handle items of different heights, so this cabinet can serve as a transition zone for mixed storage rather than being locked into a single shelf spacing.
On this WW24WCXT wall corner cabinet, solid wood corner blocks are glued and power nailed, so the cabinet case remains square as you clamp or screw it into neighboring units. Door frames are mortised and tenoned construction of solid 3/4 inch maple, giving the installer a robust frame for hinge mounting and maintaining tight joints at the corners of each door. Concealed, self-closing hinges simplify door alignment because the closing action pulls the door snug at the end of travel, helping margins look even along the face frame once set. The flat panel plywood insert is a three-ply panel with a rotary cut hard maple veneer face, stabilizing the center panel so seasonal movement is reduced around the frame joints under typical indoor conditions. Solid wood hanging strips located on the top and bottom offer continuous fastening stock across the back, which can support multiple fastener positions for leveling and plumbing the cabinet during installation. A 4 step process of stain, sealer, sanding and catalyzed top coat is applied, so the finished exterior and interior faces present a consistent Warmwood color and a hardened outer layer that holds up under routine kitchen contact. Adjustable shelves further support final fit-out, as they can be placed to clear surrounding hardware or tall items without altering the installed cabinet.
The Kitchen Kompact WW24WCXT wall corner cabinet measures 24 inches wide, 42 inches high, and 12 inches deep, so it matches common wall cabinet heights while fitting standard upper corner layouts.
The door frames are mortised and tenoned construction of solid 3/4 inch maple, which creates strong joints that help the doors stay square and aligned during daily kitchen use.
The flat panel plywood insert is a three-ply panel with a rotary cut hard maple veneer face, giving the center panel a maple look with a stable core suited to indoor cabinet environments.
The cabinet uses concealed, self-closing hinges, so the hardware stays hidden when doors are shut and the closing action pulls the doors fully closed for a consistent front appearance.
Solid wood hanging strips located on the top and bottom give solid fastening stock along the back, which supports secure mounting and straightforward leveling on wall framing.
A 4 step process of stain, sealer, sanding and catalyzed top coat is applied, producing a consistent Warmwood color and a hardened surface suited to typical kitchen cabinet service.
The Kitchen Kompact Warmwood wall corner cabinet WW24WCXT brings a 24 inch wide, 42 inch high, 12 inch deep solution that anchors a corner in a matching Warmwood run. Mortised and tenoned solid 3/4 inch maple door frames, a three-ply flat panel plywood insert with rotary cut hard maple veneer face, and solid wood corner blocks that are glued and power nailed all contribute to a stable unit ready for everyday kitchen use. Solid wood hanging strips located on the top and bottom support solid mounting, while adjustable shelves and concealed, self-closing hinges finish out a practical interior and clean exterior. For a Warmwood corner that integrates with Kitchen Kompact wall units, this cabinet provides the dimensions and construction details needed for a cohesive installation.
Sold In: 1 Each