Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
73 inch warmwood light valance gives you a 73 inch long by 4 inch high trim piece sized for spanning wider cabinet runs. The 73 inch width helps bridge multiple Kitchen Kompact cabinets in one continuous line, which matters when you want a consistent finished edge over a longer wall section. The 4 inch height provides visual coverage for lighting or wall transitions, so the area under your wall cabinets reads as one intentional band. The warmwood finish ties into Kitchen Kompact styling, which helps the valance match existing warmwood cabinetry in color and character. With its scalloped valance profile, this piece adds a shaped front edge that softens straight cabinet lines and defines the top or bottom of the run. The 3/4 x 4 x 73 sizing noted in the description means you are working with a 3/4 inch thick profile suitable for standard cabinet trim installation approaches.
The 3/4 x 4 x 73 sizing means this warmwood light valance is 3/4 inch thick, so it sits flush with common 3/4 inch face frame and trim material in a typical cabinet layout. That thickness gives you predictable edges for joining to other Kitchen Kompact moldings or side panels. The 4 inch height creates enough face to cover under-cabinet lighting sightlines or transitions to wall finishes while still staying proportional to standard wall cabinet heights. At 73 inches long, the piece can span several cabinets in one run, which reduces the number of joints you need to manage along the front edge. The scalloped profile across that length helps disguise any minor alignment variations between cabinet faces by drawing the eye to the continuous curve.
This Accessory Match, Inc. warmwood light valance is identified with the Kitchen Kompact product class, so it is intended to coordinate with Kitchen Kompact cabinet runs. The 73 inch width allows you to run the valance across multiple wall cabinets as a single piece, which is useful when you are finishing longer stretches above or below cabinets in a kitchen layout. The 4 inch height pairs well with typical wall cabinet proportions, giving enough coverage for light fixtures or wall transitions while staying visually balanced. Because the description specifies warmwood, this valance is suited to warmwood-finished Kitchen Kompact installations where the goal is a unified look across doors, frames, and trim components. The scalloped shape becomes the visual connector from cabinet to cabinet, tying separate boxes into one continuous elevation.
The 3/4 x 4 x 73 dimensions stated in the SAP description give you fixed, repeatable measurements for layout, so cuts, joints, and terminations can be planned from a known starting size. Working with a 3/4 inch thick profile keeps the valance in the same thickness family as typical face frames and trim within Kitchen Kompact, which simplifies aligning edges and corners during installation. The warmwood mention anchors the finish choice to the same tone used elsewhere in the line, supporting repeatable color matching from one project to the next. The association with Kitchen Kompact means the profile and sizing were conceived as part of a coordinated system, so this valance can act as the finishing element that closes gaps between wall cabinets and adjacent surfaces along the run.
The warmwood valance is specified as 3/4 x 4 x 73, giving you a 3/4 inch thick, 4 inch high, 73 inch long piece for planning spans and joints in a cabinet run.
The 73 inch length lets the valance extend across multiple Kitchen Kompact wall cabinets in one stretch, which reduces seams and keeps the scalloped profile continuous along the run.
The scalloped valance profile shapes the front edge into a flowing curve, softening straight cabinet lines and creating a defined decorative band along the warmwood installation.
The 3/4 inch thickness matches common cabinet and trim stock, so the valance aligns more easily with Kitchen Kompact face frames and adjacent molding pieces during installation.
The warmwood designation ties the valance finish to the warmwood Kitchen Kompact line, helping the trim blend with matching cabinet doors, frames, and other warmwood components.
This valance is classified under Kitchen Kompact, so its dimensions and warmwood appearance are suited to finishing cabinet runs built from Kitchen Kompact units.
The 73 inch warmwood light valance from Accessory Match, Inc., identified as COLV73WW in the Kitchen Kompact class, gives you a scalloped 3/4 x 4 x 73 trim piece sized for spanning warmwood cabinet runs. When the layout calls for a continuous decorative band that ties multiple Kitchen Kompact wall cabinets together, this warmwood valance supplies the matched profile, finish reference, and proportions needed to complete the elevation in one coordinated line.