
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Kitchen Kompact end panel EF324345DW is a ref. end panel sized 3 inches by 24 inches by 34-1/2 inches in the DWhite finish, so it provides a defined finished side surface that matches the referenced cabinet line. The 3 inch width gives a narrow finished termination for the cabinet run, which is useful when a standard cabinet side dimension is not desired at the exposed end. The 24 inch depth pairs with typical base cabinet depth references, allowing the panel to align along the run from front edge to back. The 34-1/2 inch height matches common base cabinet height references, helping the installer carry a consistent visual line at the toe-kick and countertop interface. The DWhite color reference allows the panel to tie into matching DWhite components, supporting a consistent appearance along walls and end-of-run locations.
The EF324345DW part number describes a ref. end panel with a 3 inch width, which lets the installer treat the panel as a narrow finish piece at the end of a cabinet run. Its 24 inch depth ties to base cabinet depth references, giving a dimensional guide for aligning the front edges on a straight line. The 34-1/2 inch height reference matches common cabinet height figures, so the panel is sized to sit alongside standard base units without extra height adjustments. Because the SAP description repeats 3X24X34-1/2 in DWhite, the dimensions and finish reference stay clear in planning documents and cut lists.
This Kitchen Kompact end panel is defined in the SAP description as REF. END PANEL 3X24X34-1/2, DWHITE, so it is designed as a dimensional reference piece for cabinet ends in DWhite layouts. The 3 inch width works wherever a narrow finished termination is needed, such as the exposed side of a base cabinet at a doorway or hallway, so the cabinet run ends with a finished vertical plane instead of an open carcase. The 24 inch depth means the panel follows the same depth reference as a standard base cabinet, which supports aligning the front frame line of cabinets and adjacent panels during installation. The 34-1/2 inch height keeps the top of the panel in line with typical base cabinet heights, which matters where the countertop edge and end panel must meet cleanly.
The EF324345DW manufacturer part number directly encodes the 3 x 24 x 34-1/2 size and DWhite finish reference, giving the installer a quick cross-check between drawings and product selection. Because the SAP description calls it REF. END PANEL 3X24X34-1/2, DWHITE, the piece serves as a clear reference for cabinet planning, helping keep dimensioning consistent from order to field work. The DWhite color designation ties it to Kitchen Kompact cabinet components in the same finish, so visible sides of cabinet runs present a unified appearance. As part of the Kitchen Kompact class and cabinet accessories category, the panel supports finishing exposed cabinet sides and transitions, which helps maintain a continuous look along walls and corners in kitchens or other cabinet installations.
The EF324345DW ref. end panel is defined as 3 inches wide, 24 inches deep, and 34-1/2 inches high, so it aligns with common base cabinet depth and height references.
The end panel is designated DWhite in the SAP description, so it is intended to coordinate with Kitchen Kompact components using the same DWhite finish reference.
The 3 inch width provides a narrow finished side, which works well when a compact end treatment is needed next to walls, doors, or other tight clearances.
The 34-1/2 inch height reference matches typical base cabinet height figures, so the panel aligns with standard base units under a countertop.
The 24 inch depth matches standard base cabinet depth references, so the panel is suited for finishing the exposed side of base cabinet runs.
The product is classified as a Kitchen Kompact cabinet accessory in DWhite, so it is intended to complement Kitchen Kompact cabinet installations using that finish.
This Kitchen Kompact end panel, defined as REF. END PANEL 3X24X34-1/2, DWHITE and identified by manufacturer part EF324345DW, offers a 3 inch by 24 inch by 34-1/2 inch DWhite solution for finishing exposed cabinet sides. For cabinet runs designed around DWhite Kitchen Kompact components that reference a 24 inch depth and 34-1/2 inch height, this panel provides matching dimensions and finish alignment at the end of the run. When a narrow finished termination is planned, selecting this EF324345DW end panel lets the layout maintain consistent DWhite appearance and base cabinet proportions along the installation.