Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
UltraLatch handle for passage door is a dedicated passage door hardware solution built around the Soss L44-10B UltraLatch design. It is configured for doors that are 1-1/2 inch thick, so it targets a common interior door dimension used in many projects. As a passage door hardware class product, it is intended for doors that do not require locking, helping you outfit through-traffic openings with consistent operation. The handle is set up with a 2-3/4 inch backset, aligning with a widely used bore position so the latch centers correctly from the door edge. An oil rubbed bronze finish defines the visible surfaces, adding a dark bronze tone that supports jobs calling for this specific color. The UltraLatch handle format focuses on the passage function, which keeps traffic flowing where privacy or security are not required.
This Soss UltraLatch passage door handle is built around a 1-1/2 inch thick door requirement, so the body and handle geometry are proportioned for that slab thickness during installation. The 2-3/4 inch backset specification dictates where the door is bored from the edge, which keeps the handle reach and latch engagement in the expected location. Because the unit is classified as passage door hardware, it provides a free-passage function rather than a locking function, so it suits hallways, closets, and other non-locking openings. The oil rubbed bronze finish is integral to the visible hardware, so once installed the door presents a consistent dark bronze tone on the hardware faces.
This UltraLatch handle for passage door is specified for use on 1-1/2 inch thick doors, so it fits projects built to that door thickness without needing alternate sizing. The 2-3/4 inch backset aligns it with common passage door layouts that use this setback from the edge, allowing the handle to sit in a familiar reach point for users. As a passage door hardware item, it is suited to interior doors where movement is needed without a locking requirement, such as general passage or utility openings. The oil rubbed bronze finish lets it serve in design schemes that call for a dark bronze tone on all visible door hardware components.
The dedicated 1-1/2 inch door thickness specification on the Soss L44-10B UltraLatch handle means the latch body, trim, and through-door alignment are engineered around that size, which supports a straight, square fit when the door is machined to that dimension. The 2-3/4 inch backset keeps the latch edge and handle placement on the same centerline as many existing bore patterns, which helps maintain consistent handle spacing from jambs and adjacent finishes across multiple doors on a project. By falling under the passage door hardware class, this UltraLatch handle provides free operation without a lock, so there is no keying or latch-bolt locking function to coordinate in the hardware schedule. The oil rubbed bronze finish also has project-level impact, because it lets this handle visually match other oil rubbed bronze items on the job, maintaining a unified build-out from door to door.
The Soss L44-10B UltraLatch handle is specified for a 1-1/2 inch thick passage door, so it matches doors built to that thickness for proper alignment through the slab.
This UltraLatch handle is designed for a 2-3/4 inch backset, positioning the latch and handle at a standard distance from the door edge used on many passage doors.
The Soss UltraLatch handle is classified as passage door hardware, so it serves non-locking passage doors where free movement through the opening is required.
The Soss L44-10B UltraLatch handle is produced in an oil rubbed bronze finish, giving the visible hardware surfaces a dark bronze appearance on the door.
The UltraLatch handle uses a 2-3/4 inch backset so the bore from the door edge lines up the latch and handle at a consistent reach point for occupants.
The Soss L44-10B part number identifies this specific UltraLatch passage door handle configuration, helping align hardware schedules and repeat orders to the same item.
The Soss UltraLatch handle for passage door 1-1/2 inch thick with 2-3/4 inch backset in oil rubbed bronze gives you a clearly defined option when the hardware schedule calls for this combination. Matching the door thickness, backset, passage function, and finish to this L44-10B model helps keep your project consistent from opening to opening.
Sold In: 1 Each
